Unbeatable Offer
Save 10%
-10%


DKG307 Automatic Mains Failure Unit
₨ 36,000.00-
Arduino, Arduino Boards & Components, Development Kits
CP-2102 Usb To Serial Usb To Uart Ttl Serial Module
-2%Arduino, Arduino Boards & Components, Development KitsCP-2102 Usb To Serial Usb To Uart Ttl Serial Module
?Key Features :
- Stable and reliable chipset CP2102.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector.
- 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
- Byte receive buffer; 640 byte transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40 to +85.
- Size: 42mm X 15mm.
- Weight: 4g
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Uno R3 with USB Cable
Key Features
- The operating voltage is 5V
- The recommended input voltage will range from 7v to 12V
- The input voltage ranges from 6v to 20V
- Digital input/output pins are 14
- Analog i/p pins are 6
- DC Current for each input/output pin is 40 mA
- DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB
- SRAM is 2 KB
- EEPROM is 1 KB
- CLK Speed is 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Electrical Instruments, Multimeters, Tools & Hardware
UT25CL Cable locator
- Key Features:-
-
Find conductors inside the wall, and detect conductor interruptions or short circuits
-
Trace the underground cable paths
-
Locate fuses and devices associated with the fuses
-
Identify short circuits and open circuits in the underfloor heating(metal)
-
Trace metal water pipes and metal heating pipelines
-
Adjust the sensitivity of the receiver automatically or manually (3 adjustable levels)
- Flashlight and backlight functions
- Automatic shutdown function
- One receiver can support up to 8 transmitters
- Energized wire detection: up to 480V(AC/DC)
- LED and buzzer indications
- CE, RoHS
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ESP32+cp2102 Wroom Esp32 Wifi Based Microcontroller Development Board Nodemcu
-2%Arduino, Arduino Boards & Components, Development KitsESP32+cp2102 Wroom Esp32 Wifi Based Microcontroller Development Board Nodemcu
?Key Features :
-
- 100% brand new and high quality.
- ESP32 is already integrated antenna and RF balun,power amplifier,low-noise amplifiers,filters,and power management module.
- The entire solution takes up the least amount of printed circuit board area.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications.
- High performance-price ratio.
- Small volume,easily embeded to other products.
- Strong function with support LWIP protocol,Freertos.
- Supporting three modes:AP,STA,and AP+STA.
- Supporting Lua program,easily to develop.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
N20 DC Gear Motor
?Key Features :
- Motor size: 10*12 (N20 motor)
- Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
- Shaft length: 8mm
- Weight: 10g
- Rated load : 200 g.cm
- Working temperature: -10 degrees – 65 degrees
- Motor mounting position: horizontal or vertical
- Reduction ratio : 1:298
- Rated voltage: DC 5V?
- Rated current : 36 MA
- Rated load speed: 50RPM
- Stall torque: 1 KG.cm
- Operating voltage range : DC3V-6V
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
?Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling?mills?Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported 3wd Smart Robot Car Chassis Kit
?Key Features :
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported Original 4wd Smart Robot Car Chassis Kit
-3%Arduino, Arduino Boards & Components, Development KitsImported Original 4wd Smart Robot Car Chassis Kit
?Key Features :
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity.
- Large and stable Chassis, easy for expansion.
- Easy interface with Arduino development platform.
- Enormous space between middle & bottom chassis.
- This kit is great for DIY Learning, Academic Research, Hobby Projects and Robot Competitions.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
W1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
-4%Arduino, Arduino Boards & Components, Development KitsW1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
?Key Features :
-
-
- Temperature Control Range: Minus 50 to 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Recording And Playback Module (Isd1820) With On Board Mic And Loud Speaker
-3%Arduino, Arduino Boards & Components, Development KitsRecording And Playback Module (Isd1820) With On Board Mic And Loud Speaker
?Key Features :
- The main chip: ISD1820.
- Dimensions : 43 x 34 x 11 (LxWxH) mm.
- The working voltage: DC 3V-5V.
- Loudspeaker: 8 Ohm, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as propaganda module.
- With looping, jog playback, single-pass play function.
- Available single-chip control.
- This module can directly drive a small speaker 8 ohm 0.5W.
- Power supply : 3-5V, which can be accessed pin power.
- Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Soil Moisture Sensor
?Key Features :
- Operating voltage: 3.3V~5V
- Dual output mode,analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable
- Panel PCB Dimension: Approx.3cm x 1.5cm
- Soil Probe Dimension: Approx. 6cm x 3cm
- Cable Length: Approx.21cm
- Interface Description(4-wire):
- VCC: 3.3V-5V
- GND: GND
- DO: digital output interface(0 and 1)
- AO: analog output interface
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Orginal UNO starter kit
?Key Features :
- 1 ? Arduino Uno R3
- 1 ? USB Cable for Arduino Uno and Arduino Mega
- 1 ? Arduino Infrared Remote
- 1 ? IR Transmitter LED 5mm Infrared Transmitter
- 1 ? KY-028 Ky028 Temperature Sensor Module
- 20 ? 20cm Pin to Pin 1 Pin Jumper Wire Dupont Line (Arduino Male to Male)
- 20 ? 20cm Pin to Hole 1 Pin Jumper Wire Dupont Line (Arduino Male to Female)
- 1 ? MB102 Breadboard 830 Points Solderless Prototyping Breadboard
- 1 ? 2.54mm Pitch 40 Pin Male Header
- 1 ? 2.54mm Pitch 40 Pin Single Row Female Header Strip
- 1 ? Towerpro Sg90 Sg 90 180 Degree Servo Motor
- 1 ? 24BYJ High Torque Geared Stepper Motor
- 1 ? DC 2V to 24V 5100 RPM High Torque Mini Micro Motor
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
LDRLight Sensor Ky-018
?Key Features :
- Dimensions: 33 x 115 x 8(L x W x H ) mm.
- Weight: 4gm.
- main chip: LM393.
- working voltage: DC 3-5V
- Signal output indicator light.
- LDR module 4 PIN
- Operating voltage 3.3V-5V
- Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
- Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry and other microcontroller board.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TTP 223 Touch Sensor Module Touch Sensor
?Key Features :
-
- Modes?Toggle or switch.
- Operating current @VDD=3V, no-load, SLRFTB=1.
- The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF) outside.
- Have two kinds of sampling length by pad option(SLRFTB pin).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides Fast mode and Low Power mode selection by pad option(LPMB pin).
- Provides direct mode toggle?mode by pad option(TOG pin), the open-drain mode by bonding option, OPDO pin is an open-drain output, Q pin is CMOS output.
- All output modes can be selected active high or active low by pad option(AHLB pin).
- Have the maximum on-time 100sec by pad option(MOTB pin).
- Have external power-on reset pin(RST pin).
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, And the function is disabled.
- Auto calibration for life.
- Re-calibration period is about 4.0sec when the key has not to be touched.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Uno R3 with USB Cable
Key Features
- The operating voltage is 5V
- The recommended input voltage will range from 7v to 12V
- The input voltage ranges from 6v to 20V
- Digital input/output pins are 14
- Analog i/p pins are 6
- DC Current for each input/output pin is 40 mA
- DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB
- SRAM is 2 KB
- EEPROM is 1 KB
- CLK Speed is 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a
Products Grid
Crazy Discounts
Best Sellers
-
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
₨ 18,500.00₨ 22,000.00
-
Genset Products, Manual & Remote Start Units
DKG116 Manual And Remote Start Unit
₨ 14,500.00₨ 15,000.00 -
Genset Products, Synchronization Units
DKG117 Synchroscope And Check Synch Relay
₨ 25,000.00₨ 28,000.00 -
-
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
₨ 27,000.00₨ 30,000.00 -
Auto Transfer Switches (ATS), Genset Products
DKG325 Genset Control & ATS Panel
₨ 35,000.00₨ 40,000.00
Recently Added
Electrical Instruments, Multimeters, Tools & Hardware
UT18D Uni-T Voltage and Continuity Tester
Key Features:-
8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
Phase sequence test
Automatic polarity test
Continuity test
RCD function
Auto power off
Frequency measurement
Low impedance measurement
LED+LCD display at the same time
Buzzer alarm
Flashlight
Safety rating: CAT III 1000V / CAT IV 600V
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT18B Voltage Detector Tester
Key Features:
Wide Voltage Range: Accurately tests voltage from 12V to 690V, suitable for various applications.
AC/DC Voltage Testing: Supports both AC and DC voltage testing for enhanced versatility.
LED Indicators: Clear LED indicators for instant voltage level readings.
Continuity Test: Built-in buzzer for quick continuity checks.
Waterproof and Dustproof: IP65-rated design for reliable operation in challenging environments.
Dual-Display Design: Offers both digital and analog displays for clear and flexible readings.
Ergonomic Build: Lightweight and easy to handle, ideal for prolonged usage.
Safety Compliance: Meets international safety standards for worry-free operation.
SKU: n/a
Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
-20%


Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
Alloy Composition: Sn63Pb37 (63% Tin, 37% Lead) for reliable electrical conductivity and strong bonding.
Particle Size: 25–45 μm, perfect for precision applications.
Weight: 500 grams – suitable for extended use in industrial or professional settings.
Mark: N-grade quality for consistent and top-notch performance.
Manufacturer: ZS.HX China – a renowned name in soldering materials.
Excellent wetting properties for clean, smooth solder joints.
Eutectic composition ensures a low melting point of 183°C, minimizing thermal stress on components.
Packaged to maintain freshness and prevent contamination.
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT181A True RMS Datalogging Multimeter
Key Features:-
Data logging: 20000
Data comparison
3.5-inch 64k color TFT LCD
Dual temperature measurement
Low pass filter
2000mAh Li-ion battery
Real time and date
Peak hold
Bluetooth/APP
USB interface cable /PC software CD
IP65
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
-8%


Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
-3%


Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
-6%


Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60BT Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60EU Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60S Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a