-14%
Other Generator Parts/ Accessories, Sensors
VDO Pressure sender 0-10 Bar – M14
Key Features
- Category: Pressure Senders
- Pressure range: 0 to 10 Bar
- Thread: M14 x 1.5 (1/8-27 NPTF)
- Sender resistance range: 10 – 184 Ohm
- Sensor signal: 1-pole common ground
- Warning contact: 1.00 Bar 0.15 Bar
- Application: VDO Engine
- Monitoring Signal: Analogue 10 – 184 Ohm
- Operating Voltage: 6 – 24 Volt DC
- Sensor Signal: Common Ground
- Warning Contact 1.00 Bar 0.15
₨ 3,000.00 ₨ 3,500.00
VDO Pressure sender 0-10 Bar – M14
You can buy VDO Pressure sender 0-10 Bar – M14 online anywhere from Pakistan or by visiting Electronic Power House (EPH)andTetralink Technologies (TLT) in Lahore. We are the main distributor of generator sensors in Pakistan. We have a variety of generator sensors always ready in stock. All international brands of generator sensors are also available at very reasonable and best prices in Pakistan.
Key Features of
- Category: Pressure Senders
- Pressure range: 0 to 10 Bar
- Thread: M14 x 1.5 (1/8-27 NPTF)
- Sender resistance range: 10 – 184 Ohm
- Sensor signal: 1-pole common ground
- Warning contact: 1.00 Bar 0.15 Bar
- Application: VDO Engine
- Monitoring Signal: Analogue 10 – 184 Ohm
- Operating Voltage: 6 – 24 Volt DC
- Sensor Signal: Common Ground
- Warning Contact 1.00 Bar 0.15
This product is perfectly fitted for VDO models. Reliable oil pressure part, enjoy driving. Nice replacement for old or damaged oil pressure sensor. Excellent workmanship, long service life
| color | Black |
|---|
-
Pressure measuring range: 0 – 10 Bar
0 – 145 PSI
0 – 1000 KPaMaximum pressure: 30 Bar during 2 seconds Thread: M14 x 1.5 Length thread + nut (L1): 20.5 mm Thread length (L2): 12 mm Torque: 60 Nm Operating temperature: -25 ?C to +100 ?C Pressure medium: Oil – Fuel – Air Electrical features:
Operating voltage: 6 – 24 V DC Resistor range: 10 – 184 Ohm Pressure sensor signal: Single-Pole common ground Warning contact: 1.00 Bar ? 0.15 Bar Warning contact switching capacity: Maximum 5 Watt non-inductive Warning contact features: Closes with falling pressure Pressure sender connector: Bosch push-on connector 2.8×0.8mm Warning contact connector: Bosch push-on connector 2.8×0.8mm
You may also like…
-
Automatic Mains Failure Units (AMF), Genset Products
DKG307 Automatic Mains Failure Unit
Key Features
- True RMS measurementss
- ECU connection through J1939 CAN option -for CAN version Only
- MPU input option for MPU Version Only
- Dual genset mutual standby operation
- Event logging with time stamp and measurements
- Battery backed-up real-time clock
- Built-in daily/weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- Customer logo display capability
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG307 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DKG155 Manual Start Genset Controller With Key Switch
-35%
Genset Products, Manual & Remote Start UnitsDKG155 Manual Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- Digital display of generator frequency
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Spare fault input
- Alarm output
- Two-part connectors for easy replacement
- Standard panel dimensions (72x72mm)
- Low cost
- Low failure rate
- Click Here To Download DKG155 User Manual
- Click Here To Download DKG155 Brochure
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DKG105 AMF Unit (Automatic Mains Failure Controller)
-24%
Automatic Mains Failure Units (AMF), Genset ProductsDKG105 AMF Unit (Automatic Mains Failure Controller)
Key Features
- Automatic engine starting and stopping
- Gas engine support
- Automatic mains failure monitoring
- Automatic load transfer
- Automatic shutdown on fault condition
- Provision for energizing to stop, preheat & choke outputs
- Mains phases voltage limits checking
- Generator phase voltage limits checking
- Delayed over-speed and under-speed alarm
- Digitally adjustable low & high mains voltage limits
- Digitally adjustable low & high generator voltage limits
- Digitally adjustable under-speed & over-speed limits
- Digitally adjustable delay for speed alarm
- Digitally adjustable timers
- Digital display of mains & generator voltages
- Digital display of generator frequency
- Digital engine run-hours display
- Plug-in connection system for easy replacement
- Low cost
- Small dimensions
- Standard panel dimensions, (72x72mm)
- Click Here To Download DKG105 User Manual
SKU: DKG105 -
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
Key Features
- Back-lit icon LCD display
- Front panel editing
- LED and LCD alarm indication
- Power Save mode
- PC configurable
- 6 Digital inputs
- 4 Outputs (2 configurable)
- Configurable timers and alarms
- Remote Start input
- Generator voltage display
- Generator frequency display
- Battery voltage display
- Engine speed display
- Hours counter
- Engine pre-heat
- Click Here To Download DSE3110 User Manual
- Click Here To Download DSE3110 Data Sheet
SKU: n/a
Related products
-
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
Rotating Bridge Rectifier For Leroy Somer Generators 33025777-Copper
-25%
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesRotating Bridge Rectifier For Leroy Somer Generators 33025777-Copper
Key Features
- Diode Bridge rectifier
- SSAYEC432, 33025777
- Diode Bridge 432, Diode Bridge rectifier
- Facon 330-25777 is designed for generator
- Diode Bridge 432 is designed for generator
- Diode bridge rectifier
- 330-25777 is designed for Somer generator
- Diode Bridge 432 is designed for SF generator
- Diode Bridge Facon 330-25777 is designed for LS generator
SKU: n/a -
Automatic Voltage Regulators (AVRs)
AVR AS440 for Stamford Generator
- AS440 is a half-wave phase-controlled thyristor type AVR
- Sensing Input: Voltage Jumper selectable 100-130 Vac 1 phase or 190-264 Vac 1 phase
- Output:Voltage 82 V d. C. @ 200 V a. C
- Frequency: 50-60 Hz nominal
- Regulation:+/- 1.0%
- Soft Shell
- Stamford Logo on the back
- Click Here To Download AS440 User Manual
SKU: n/a -
Automatic Voltage Regulators (AVRs)
MX341 AVR-UK with Soft Shell for Stamford Generator
- Stamford AVR MX341 voltage regulator for a brushless generator
- Anticipates alternator output voltage and modifies the exciter stator length
- Soft start, damping, and stability circuits included
- Typical AVR system response is 10ms
- A remote voltage trimmer can be connected to the generator for finer control of output
- SENSING INPUT Voltage 190-264V ac max, 1 phase 2 wire Frequency 50-60HZ nominal
- POWER INPUT Voltage 140-220 V ac max, 3 phase,3 wire CURRENT: 3A/phase Frequency 100-120HZ nominal
- OUTPUT Voltage max 120V dc Current continuous 2.7A dc
- Exact Generic Replacement
- Click Here To Download MX341 User Manual
SKU: n/a
