Search results: “eph” – Page 4
Showing 85–112 of 273 results
-
Arduino, Arduino Boards & Components, Development Kits
HC-06 Bluetooth Module
Key Features :
-
-
- Works with any USB Bluetooth adapters.
- Default Baud Rate: 9600,8,1,n.
- Built in antenna.
- Coverage up to 30ft.
- Bluetooth version: V2.0+EDR
- Operating voltage: 3.3V
- Default Baud Rate: 9600,8,1,n.
- Signal coverage: 30ft
- Item size: 4.3 * 1.6 * 0.7cm
- Item weight: 3g
- Package size: 9 * 3 * 1cm
- Package weight: 8g
- Commercial Series: Bluetooth module board Series
- With LED indicator light, use 150mA and 3.3V regulation chip.
- With VCC.GND.TXD.RXD foot for the Bluetooth
- With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
- Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
- Input voltage: 3.3~6V
- Size: 1.55cm*3.98cm
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
HC-05 Bluetooth Module
Key Features :
-
- HC-05 Bluetooth Module In PakistanTTL Module (With EN Pin) Breakout is the latest Bluetooth wireless serial Module. This version of the popular Bluetooth module uses the HC-05. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
A4988 A4988 Stepper Motor Driver
Key Features :
-
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
ESP32+cp2102 Wroom Esp32 Wifi Based Microcontroller Development Board Nodemcu
-2%Arduino, Arduino Boards & Components, Development KitsESP32+cp2102 Wroom Esp32 Wifi Based Microcontroller Development Board Nodemcu
Key Features :
-
- 100% brand new and high quality.
- ESP32 is already integrated antenna and RF balun,power amplifier,low-noise amplifiers,filters,and power management module.
- The entire solution takes up the least amount of printed circuit board area.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications.
- High performance-price ratio.
- Small volume,easily embeded to other products.
- Strong function with support LWIP protocol,Freertos.
- Supporting three modes:AP,STA,and AP+STA.
- Supporting Lua program,easily to develop.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
UNO orginal 328+16U2-without Wire
Key Features:
- NEW IMPROVEMENT: Clear prints on the female header connector, more precise and easier to use the wire.
- The ELEGOO UNO R3 BOARD now uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
- Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3)
- 100% compatible with the Arduino IDE and RoHS Compliant
- The Uno board can be powered via the USB connection.
- The Uno board can be powered with an external power supply.
- Excellent welding and production quality to make sure satisfied customer experience
- The RX and TX LEDs on the board will flash when data is being transmitted via the USB-to-serial chip and USB connection to the computer.
- We have always cared about the customer experience and improve the product function details.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Nano MEGA328P-without Wire
Key Features:
- The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino, so pls. use the driver from our site.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
- Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
0-60V Battery Level Meter
It is the perfect multifunctional tool for troubleshooting. Measure the power and energy consumption of any battery-powered device. The easy-to-read LCD screen provides clear digital readings. When connected, the wattmeter will continuously provide real-time readings of amperes, volts and watts. The device can calculate the voltage, current, power, discharge capacity and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Large screen reality, backlight can be set, function switching query.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
-4%Arduino, Arduino Boards & Components, Development KitsLM2596 Dc To Dc Buck Converter Step Down Module Power Supply
Key Features:
- Model name: DC-DC LM2596S buck module
- Input voltage:3.2V~46V (recommended for use in 40V)
- Output voltage:1.25V~35V
- Output current:3A (maximum)
- Conversion efficiency:92% (highest)
- Output ripple:<30mV
- Switching frequency:65KHz
- Working temperature:-45 ~ +85
- Dimension:21mm * 43mm * 14mm (length * width * height)
SKU: n/a -
Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.
TP4056 type-C Lithium Battery Charging Board
-10%Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.TP4056 type-C Lithium Battery Charging Board
- Inputs with Type C female, can be directly input to do with the phone charger rechargeable lithium battery,
- And still retains the input voltage wiring pads, can be very convenient DIY
- Input voltage: 5V
- Charging cut-off voltage: 4.2V ± 1%
- Maximum charge current: 1000mA
- Battery over-discharge protection voltage: 2.5V
- Battery overcurrent protection current: 3A
- Board size: 2.6 * 1.7CM
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TP4056- Micro USB Li-ion Battery Charging Board With Current Protection Bms
-20%Arduino, Arduino Boards & Components, Development KitsTP4056- Micro USB Li-ion Battery Charging Board With Current Protection Bms
Key Features
- Microcontroller : Atmel SAM3X8E ARM Cortex-M3
- CPU: 32-Bit
- Digital I/O: Pins54
- PWM Output: 12
- PWM Output: 12
- Analog Input: 12
- Analog Input: 12
- Flash Memory (Program Memory): 512 KB
- SRAM96KB (two banks: 64KB and 32KB)
- Operating Voltage: 3.3V
- Input Voltage: 7-12 V
- Oscillator up to 84 MHz
- Arduino Due is open-source hardware! You can build your own board using the following files
- Click Here to Download Open Source Arduino Software
- EAGLE FILES IN .ZIP
- SCHEMATICS
- FRITZING IN .FZPZ
- BOARD SIZE .IN
SKU: n/a -
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
WDD35D4 6mm Round Shaft Rotary Wire Wound Potentiometer 5K Ohm 2Watt
-11%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.WDD35D4 6mm Round Shaft Rotary Wire Wound Potentiometer 5K Ohm 2Watt
- Brand Name: WDD35D4
- Rated Power:2W
- Resistance Tolerance:0.5%
- Type:Conductive Plastic Potentiometer
- Model Number:WDD35D-4 5K
- Technology:Metal Alloy
- Standard Resistance:5K
- Outer diameter: 36.5mm
- Shaft: 6mm
- Independence linearity: 0.5%
- Theoretical electrical angle: 345 deg 2 degree
- Resolution: Unlimited
- Temperature Coefficient of Resistance (ppm/degree): <400
- Operating temperature range: -55 degree to +125 degree
- Mechanical angle: 360 degree
SKU: n/a -
Electrical Instruments, Multimeters, Tools & Hardware
UT373 Mini Tachometer UNI-T RPM Meter
Key Features
- Auto range.
- Up to 99999 display; overload display, “OL”.
- RPM measurement and revolution count.
- Max/Min, Data hold.
- Signal trigger/laser-on indication.
- Low battery/auto power-off indication.
- LCD backlight.
SKU: n/a -
Electrical Instruments, Multimeters, Tools & Hardware
UNI-T UT201+ Digital Clamp Multimeter True RMS Clamp Meter
-8%Electrical Instruments, Multimeters, Tools & HardwareUNI-T UT201+ Digital Clamp Multimeter True RMS Clamp Meter
Key Features
- AC current
- AC/DC voltage
- Resistance
- Continuity test
- Diode test.
- True RMS measurement.
- Audiovisual NCV detection.
- Large LCD.
- Full-featured false detection protection for up to 600 V energy surges; overvoltage and overcurrent alarm functions.
- The power consumption of the meter is about 1.8 mA.
- The circuit has an automatic power-saving function.
- The consumption in the sleep state is <11 μA, which extends the battery life to 400 hours.
- Low battery indication.
- Automatic power of after 15 of no-operation (function can be turned off).
- Data hold function.
- Max/Min mode.
SKU: n/a -
Electrical Instruments, Multimeters, Tools & Hardware
UT33C+ Handheld Digital Multimeter in Pakistan
-12%Electrical Instruments, Multimeters, Tools & HardwareUT33C+ Handheld Digital Multimeter in Pakistan
Key Features
- Ideal for measuring voltage, current, diode, resistance, temperature, etc.
- Easy to read with LCD display design
- Small size, convenient to hold and carry
- Safe and reliable to use with a protection system
- Powered by 2 x AAA 1.5V battery ( not included )
- High sensitivity and accuracy for a variety of measurements
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIMPlus630-46624V Controller for Generator
-18%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIMPlus630-46624V Controller for Generator
Key Features
- 630-089 EIM (PREVIOUSLY 630-466) Interface 630-466 for gensets 24V
- 630-089 EIM is PREVIOUSLY 630-466
- The Engine Interface Module is a sealed engine mounted module that provided switching relays for the starter motor solenoid, glow plug and fuel solenoid.
- Use of the EIM 630-466 PLUS means that heavy currents such as fuel solenoid power are isolated from the control panel thus enabling individual protection of each of the circuits.
- Engine interface ModuleEIMPLUS630-46624V controller
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
-11%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
Key Features
- Emergency Stop Low-Lub oil pressure Speed
- Manual Start/stop Charge Failure Voltage of battery
- Distance Start/Stop Emergency STOP Lub Oil pressure
- Preheat Control High temperature of cooling water Operation time
- Stop/idle control High Speed/Start and stop failure Voltage/Current
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIMPlus630-46512V Controller for Generator
-11%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIMPlus630-46512V Controller for Generator
Key Features
- 630-088 EIM (PREVIOUSLY 630-465) Interface 630-465 for gensets 12V
- 630-088 EIM is PREVIOUSLY 630-465
- The Engine Interface Module is a sealed engine mounted module that provided switching relays for the starter motor solenoid, glow plug and fuel solenoid.
- Use of the EIM 630-465 PLUS means that heavy currents such as fuel solenoid power are isolated from the control panel thus enabling individual protection of each of the circuits.
- Engine interface ModuleEIMPLUS630-46512V controller
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
Bridge Rectifier Module 160MT160KB IR
-29%Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesBridge Rectifier Module 160MT160KB IR
Key Features
- Manufacturer: IR
- Type of bridge rectifier: Three-phase
- Max. off-state voltage: 1.6kV
- Load current: 160A
- Max. forward impulse current: 1.43kA
- Electrical mounting: Screw
- Version: module
- Max. forward voltage: 1.49V
- Leads: M5 screws
- Case: MT-K
- Mechanical mounting: Screw
- Click Here To Download 160MT160 KB Data sheet
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIM Basic MK3258-975312V Controller for Generator
-8%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIM Basic MK3258-975312V Controller for Generator
Key Features
- Emergency Stop Low-Lub oil pressure Speed
- Manual Start/stop Charge Failure Voltage of battery
- Distance Start/Stop Emergency STOP Lub Oil pressure
- Preheat Control High temperature of cooling water Operation time
- Stop/idle control High Speed/Start and stop failure Voltage/Current
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
Rotating Bridge Rectifier For Leroy Somer Generators 33025777-Copper
-25%Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesRotating Bridge Rectifier For Leroy Somer Generators 33025777-Copper
Key Features
- Diode Bridge rectifier
- SSAYEC432, 33025777
- Diode Bridge 432, Diode Bridge rectifier
- Facon 330-25777 is designed for generator
- Diode Bridge 432 is designed for generator
- Diode bridge rectifier
- 330-25777 is designed for Somer generator
- Diode Bridge 432 is designed for SF generator
- Diode Bridge Facon 330-25777 is designed for LS generator
SKU: n/a -
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
M50100THC1600 and M50100THA1600 Crydom Mexico 100A 1600V Bridge (Pair)
-10%Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesM50100THC1600 and M50100THA1600 Crydom Mexico 100A 1600V Bridge (Pair)
Key Features
- 3-Phase Positive and Negative Pair
- 100A/1600V Diode Module
- High Surge Current Rectifier Circuits
- 5 Different Circuits to Choose from
- Up to 1600 Volt Blocking Standard
- UL Recognized E72445
SKU: n/a -
Electronic Governors
S6700H Engine Speed Control Unit for Generators
Key Features:
- Speed control Unit S6700H is an All-Electronic Device Designed to control engine speed with fast and precise response to transient load changes
- Actuator default protection
- Speed signal Lose protection
- Over-speed & External high Level input Alarm
- High reliability and can withstand all kinds of electromagnetic interference around the engine
- Easy to install, you can adjust the working speed in advance to meet your requirements
- Prevent reverse battery voltage, instantaneous pulse voltage. So as not to damage the machine
- Fast and precise response, able to recognize momentary symbol changes
- Fully electronic closed-loop design and control of a wide range of engines
SKU: n/a -
Electronic Governors
S6700E Engine Speed Control Unit for Generators
Key Features:
- The S6700E Speed control Unit is an All-Electronic Device Designed to control engine speed with fast and precise response to transient load changes.
- The basic characteristics of this unit S6700E is to reach rated speed and power as well as reducing smoke exhaust through adjustment of firing fuel and speed-rate.
- The S6700E speed control Unit provides a series of protection once the power supply is reversely connected. Transient over voltage or actuator fault happens, or Speed input breaks.
- S6700E Speed Control Unit Engine Governor Controller for Diesel Generator Genset
- High reliability and can withstand all kinds of electromagnetic interference around the engine
- Easy to install, you can adjust the working speed in advance to meet your requirements
- Fast and precise response, able to recognize momentary symbol changes
- Fully electronic closed-loop design and control of a wide range of engines
SKU: n/a -