Manual & Remote Start Units
Showing 1–28 of 30 results
-
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
D200 Advanced Genset Controller
-25%Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsD200 Advanced Genset Controller
Key Features
- AMF unit with uninterrupted transfer
- ATS unit with uninterrupted transfer
- Remote start controller
- Manual start controller
- Engine controller
- Waveform display of V & I
- Harmonic analysis of V & I
- CTs at genset or load side
- Click Here To Download D200 User Manual
SKU: n/a -
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
D300 Advanced Genset Controller
-17%Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsD300 Advanced Genset Controller
Key Features
- AMF unit with uninterrupted transfer
- ATS unit with uninterrupted transfer
- Remote start controller
- Manual start controller
- Engine controller
- Remote display & control unit
- Waveform display of V & I
- Harmonic analysis of V & I
- CTs at Genset or load side
- Click Here To Download D300 User Manual
SKU: n/a -
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
D500 Advanced Genset Controller
-7%Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsD500 Advanced Genset Controller
Key Features
- AMF unit with uninterrupted transfer
- ATS unit with uninterrupted transfer
- Remote start controller
- Manual start controller
- Engine controller
- Remote display & control unit
- Waveform display of V & I
- Harmonic analysis of V & I
- CTs at Genset or load side
- Click Here To Download D500 User Manual
SKU: n/a -
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
DKG109 Automatic Mains Failure Unit
-8%Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsDKG109 Automatic Mains Failure Unit
Key Features
- True RMS measurements
- Automatic mains failure
- Engine control
- Generator protection
- 3 phase mains voltage inputs
- 1 phase genset voltage inputs
- 1 phase genset CT inputs
- Engine oil pressure measurement
- Engine coolant temperature measurement
- Fuel level measurement
- Genset active power measurement
- Genset power factor measurement
- Engine rpm display
- Remote Start operation available
- Mains simulation input
- Engine Idle speed control
- Periodic maintenance request
- Engine hours counter
- 128×64 graphic LCD display
- Click Here To Download DKG109 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DKG116 Manual And Remote Start Unit
Key Features
- Both Manual and remote control
- Generator protection
- Built-in alarms and warnings
- Remote Start operation available
- True RMS measurements
- Tamper-proof engine hours display
- Field adjustable parameters
- High current Fuel and Crank outputs
- Optional auxiliary output
- Optional magnetic pickup input
- Digital inputs: 4
- Survives cranking dropouts
- Sealed front panel
- Standard panel dimensions: 96x48mm
- Plug-in connection system
- Click Here To Download DKG116 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
Key Features
- True RMS measurements
- Dual genset mutual standby operation
- Event logging with time stamp and measurements
- Battery backed-up real-time clock
- Built in daily / weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- MODBUS communications
- Customer logo display capability
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG317 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
Key Features
- Back-lit icon LCD display
- Front panel editing
- LED and LCD alarm indication
- Power Save mode
- PC configurable
- 6 Digital inputs
- 4 Outputs (2 configurable)
- Configurable timers and alarms
- Remote Start input
- Generator voltage display
- Generator frequency display
- Battery voltage display
- Engine speed display
- Hours counter
- Engine pre-heat
- Click Here To Download DSE3110 User Manual
- Click Here To Download DSE3110 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE5110 Manual & Auto Genset Controller
Key Features
- Automatic start
- Configurable inputs
- Configurable outputs
- Configurable alarms & timers
- Digital inputs
- Analogue inputs
- Back-lit character LCD display
- Engine protection
- Front panel mounting
- Icon based fault diagnostics
- PC configurable using P810 I/F
- Front panel programming
- Remote monitoring
- LCD alarm indication
- LED alarm indication
- Click Here To Download DSE5110 User Manual
- Click Here To Download DSE5110 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE5210 AMF Controller
Key Features
- Automatic start
- Automatic mains (utility) failure
- detection (DSE5220 only)
- Automatic load transfer
- Configurable inputs
- Configurable outputs
- Configurable alarms & timers
- Digital inputs
- Analogue inputs
- Back-lit character LCD display
- Engine protection
- Front panel mounting
- PC configurable
- Front panel programming
- Remote monitoring
- Engine history event log
- LED alarm indication
- LCD alarm indication
- SMS messaging
- Hid till lit alarm icons
- Engine exercise mode
- Magnetic pick-up
- Click Here To Download DSE5210 Operators Manual
- Click Here To Download DSE5210 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE6010-MKII Manual & Auto Genset Controller
Key Features
- Large back-lit icon display
- Heated display option available
- Fully configurable via the fascia or PC using USB comm.
- Efficient power save mode
- 3 phase generator sensing
- Generator/load power monitoring (kW, kV A, kV Ar, pf)
- Accumulated power monitoring (kW h, kVA h, kVAr h)
- Generator overload protection (kW)
- Generator/load current monitoring and protection
- Breaker control via fascia buttons
- Fuel and start outputs, configurable when using CAN
- 4 configurable DC outputs
- 4 configurable analog/digital inputs
- 6 configurable digital inputs
- Support for 0-10 V & 4-20 mA oil pressure sensors
- Configurable staged loading outputs
- CAN, MPU, and alternator speed sensing in one variant
- 3 engine maintenance alarms
- Engine speed protection
- Engine hours counter
- Engine pre-heat
- Engine run-time scheduler
- Engine idle control for starting & stopping
- Fuel pump control
- Real-time clock
- Battery voltage monitoring
- Start on low battery voltage
- Configurable remote start input
- 1 alternative configuration
- Comprehensive warning, electrical trip or shutdown protection upon a fault condition
- LCD and LED alarm indication
- Configurable event log (50)
- Click Here To Download DSE6010 User Manual
- Click Here To Download DSE6010 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE710 Manual & Auto Genset Controller
Key Features
- PC configurable using P810 Interface
- Digital and analog inputs
- Digital outputs
- Automatic shutdown or warning
- When fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Configurable inputs
- Back-lit character/icon LCD display
- Click Here To Download DSE710 User Manual
- Click Here To Download DSE710 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE720 Manual & Auto Genset Controller
Key Features
- PC configurable using P810 Interface
- Digital and analog inputs
- Digital outputs
- Automatic mains (utility) supply monitoring
- Automatic shutdown or warning
- When fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Configurable inputs
- Back-lit character/icon LCD display
- Click Here To Download DSE720 User Manual
- Click Here To Download DSE720 Data Sheet
SKU: n/a -
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
dsPIC30F2010 Microchip
-9%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.dsPIC30F2010 Microchip
- High-Performance
- 16-bit Digital Signal Controllers
Modified Harvard architecture - C compiler-optimized instruction set architecture
- 83 base instructions with flexible addressing modes
- 24-bit wide instructions, 16-bit wide data path
- 12 Kbytes on-chip Flash program space
- 512 bytes on-chip data RAM
- 1 Kbyte nonvolatile data EEPROM
- 16 x 16-bit working register array
- Up to 30 MIPs operation:
– DC to 40 MHz external clock input
– 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x) - 27 interrupt sources
- Three external interrupt sources
- Eight user-selectable priority levels for each interrupt
- Four processor exceptions and software traps
- Click Here To Download dsPIC30F2010 Data Sheet
SKU: n/a -
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
dsPIC30F2010-30I/SO Microchip
-57%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.dsPIC30F2010-30I/SO Microchip
- High-Performance
- 16-bit Digital Signal Controllers
Modified Harvard architecture - ?C compiler-optimized instruction set architecture
- 83 base instructions with flexible addressing modes
- 24-bit wide instructions, 16-bit wide data path
- 12 Kbytes on-chip Flash program space
- 512 bytes on-chip data RAM
- 1 Kbyte nonvolatile data EEPROM
- 16 x 16-bit working register array
- Up to 30 MIPs operation:
– DC to 40 MHz external clock input
– 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x) - 27 interrupt sources
- Three external interrupt sources
- Eight user-selectable priority levels for each interrupt
- Four processor exceptions and software traps
- Click Here To Download dsPIC30F2010 Data Sheet
SKU: n/a -
Genset Products, Manual & Remote Start Units
GTR-168 Manual & Auto Genset Controller With Key Switch
-17%Genset Products, Manual & Remote Start UnitsGTR-168 Manual & Auto Genset Controller With Key Switch
Key Features
- Automatic/Manual engine starting and stopping
- Gas engine support
- Emergency / Auxiliary engine shutdown
- Low battery warning
- Over speed shutdown
- High water temperature shutdown
- Low oil pressure shutdown
- Survives cranking dropouts
- Key switch to avoid unauthorized access
- ATS Auto Start function by detecting ATS terminal 12 grounded
- Plug-in connection system for easy replacement
- Low cost
- Small dimensions
- Standard panel dimensions, (72x72mm)
- Click Here To Download GTR-168 User Manual
SKU: n/a -
Arduino Boards & Components, Diode, IGBT. MOSFET & SCR Modules, Manual & Remote Start Units
K75T60 IGBT 600V 75A For Solar Inverter
-22%Arduino Boards & Components, Diode, IGBT. MOSFET & SCR Modules, Manual & Remote Start UnitsK75T60 IGBT 600V 75A For Solar Inverter
Key Features
- Very low VCE (sat) 1.5V (typ.)
- Maximum Junction Temperature of 175?
- Short circuit withstand time 5micro seconds
- Positive temperature coefficient in VCE (sat)
- Very tight parameter distribution
- High ruggedness, temperature-stable behavior
- Very high switching speed
- Low Electro Magnetic Interference
- Very soft and fast recovery anti-parallel Emitter Controlled HE diode
- Pb-free lead plating
- RoHS compliant
SKU: n/a