arduino due

?Key Features :

1. • Product Name: Flame Sensor Module
   • Output Channel: 1
   • Power Supply: 3.3/5V
   • PCB Board Size: 32 x 14mm(L*W)
   • Hole Size: 3mm
   • Material: Electric Part
   • Net Weight 3g
   • indicator light: a green one for the switch, a red one for power.
   • Built in a potentiometer for sensitivity control.
   • Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
   • Can detect fire or wavelength in 760 ~ 1100 nm nano within the scope of the light source.
   • Detection angle about 60 degrees, the flame spectrum especially sensitive.
   • The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.

?Key Features :

• • HC-05 Bluetooth Module In PakistanTTL Module (With EN Pin) Breakout is the latest Bluetooth wireless serial Module. This version of the popular Bluetooth module uses the HC-05. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required.

?Key Features :

1. 1. Power Supply: +5V DC
   2. Quiescent Current : <2mA
   3. Working Current: 15mA
   4. Effectual Angle: <15?
   5. Ranging Distance : 2cm ? 400 cm/1? ? 13ft
   6. Resolution : 0.3 cm
   7. Measuring Angle: 30 degree
   8. Trigger Input Pulse width: 10uS minimum
   9. Dimension: 45mm x 20mm x 15mm

?Key Features :

1. A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
2. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
3. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.

?Key Features :

1. ?Operating voltage: DC5V-35V
2. Output current: 0-5A
3. Output power: 90W (max)
4. PWM duty cycle: 1% -100%
5. PWM frequency: 10khz
6. Size: 30mm x 24mm x 15mm (Without Handle)

?Key Features :

1. • 5V power supply.
   • Serial I2C control of LCD display using PCF8574.
   • The backlight can be enabled or disabled via a jumper on the board.
   • Contrast control via a potentiometer.
   • Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
   • Size ?41.6 x 19.2 mm.

?Key Features :

1. 1. 1. sensor adopts TR5000, high sensitivity
      2. sensitivity adjustable digital potentiometer to adjust (blue)
      3. modules can induction block from 0 to 3 cm
      4. 5 V working voltage of 3.3 V
      5. 5a output form the output analog voltage (0 to 5 v) B digital switch output (0 and 1)
      6. Has a fixed bolt hole, the work of the installation
      7. Small board PCB size: 3.5 cm * 1.5 cm
      8. The power indicator light (red) and digital switch output indicator light (green)
      9. Comparator USES the LM393 chips, work stability
      10. Three small plate interface specifications wire (4)
      11. 1 VCC external 3.3 V to 5 V
      12. 2 GND external GND
      13. 3 DO small plate digital output interface (0 and 1)
      14. 4 small AO plate analog output interface (0 to 5 v)

?Key Features :

1. • Small and compact size, making it easy to integrate into your project
   • Produces a loud and clear sound that can be heard from a distance
   • Can be easily controlled with a microcontroller or other digital circuit
   • Low power consumption, making it suitable for battery-powered projects

 Key Features :

1. Measures Inductors with ESR (in ohms)
2. Measures capacitance and ESR
3. Auto Detects and Measures forward voltages of diodes, dual diode, and LEDs
4. Test FETs gate capacitance and turn-on gate voltage
5. Discovers transistor for NPN or PNP type and measures HFE / Gain and Saturation Voltage
6. Test SCR,
7. Can also test voltage regulators including surface mount regulators
8. Measures Resistance, and Adjustable potentiometers
9. Auto operation, Auto detects pinout of transistors, fets, LEDs, diodes and voltage regulators
10. Bright Backlight
11. One-touch operation
12. Battery voltage display at power-up and low battery display

?Key Features :

1. Dimensions: 33 x 115 x 8(L x W x H ) mm.
2. Weight: 4gm.
3. main chip: LM393.
4. working voltage: DC 3-5V
5. Signal output indicator light.
6. LDR module 4 PIN
7. Operating voltage 3.3V-5V
8. Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
9. Output: DO digital switch output (0 and 1), AO analog voltage output Compatible with Arduino, Raspberry and other microcontroller board.

?Key Features :

1. Max Voltage:?100VDC
2. Max Current:?500mA
3. Max Rating:?10W
4. Gap:?20 5mm
5. Contact Mode:?NO
6. Dimensions:?34x41x6.5 mm

?Key Features :

1. • It is widely used in radio modification, phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgrade.
   • ?It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
   • Pre-assembled compact size?board
   • Suitable for use with most microcontrollers
   • Operates up to 250 kbit/s

?Key Features :

1. Power supply: 4.5V ? 5.5V, 3.3V voltage regulator circuit board
2. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
3. Control Interface: GND, VCC, MISO, MOSI, SCK, CS
4. Size: 45 x 28mm
5. Net weight: 6g

?Key Features :

1. Measuring humidity and?temperature.
2. Large LCD display, easy for reading.
3. Temperature unit is switchable.
4. Desk-top placing or wall hanging, easy to use.
5. Made of high-quality material.
6. Widely used in indoor temperature and humidity measurement, apply in?the lab, cold chain transport, warehousing and other occasions.
8. Powered by 2 x 1.5v LR44 button cell.
9. Comes with a probe that is easy to use.
10. Perfect for use in incubators, brooders, homebrew room at any other place, the monitoring of temperature and humidity required.