arduino due
Showing 85–90 of 90 results
-
Arduino, Arduino Boards & Components, Development Kits
Water Flow Sensor
?Key Features :
-
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80?
- Working Humidity Range: 35%-80% RH
- Accuracy: ?10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2? nominal pipe connections, 0.78? outer diameter, 1/2? of thread
- Size: 2.5? x 1.4? x 1.4?
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Water Level Sensor
?Key Features :
-
-
Operating voltage: DC3-5V
-
Operating current: less than 20mA
-
Sensor Type: Analog
-
Detection Area: 40mmx16mm
-
Production process: FR4 double-sided HASL
-
Operating temperature: 10?-30? Humidity: 10% -90% non-condensing
-
Dimensions: 60mmx20mm
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Water Pump 5V
?Key Features :
- Operating Current : 130 ~ 220mA
- Operating Voltage : 2.5 ~ 6V
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Driving Mode : DC, Magnetic Driving
- Continuous Working Life : 500 hours
- Material : Engineering Plastic
- Outlet Outside Diameter : 7.5 mm
- Outlet Inside Diameter : 5 mm
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
XL-4015 Adjustable Dc To Dc Step Down 5a Buck Converter With Heatsink
-4%
Arduino, Arduino Boards & Components, Development KitsXL-4015 Adjustable Dc To Dc Step Down 5a Buck Converter With Heatsink
?Key Features :
- Input voltage range?4?38VDC(Note: input voltage not exceeding 38V).
- Output voltage range?1.25-36VDC adjustable.
- Output current:?0-5A.
- High efficiency up to 96%.
- Output power:?75W.
- Built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
- Input reverse polarity protection: None (if required, the high current diode in series with the input).
- Power Indicator:?Yes
- Short circuit protection: Yes (limit current 8A)
- Overtemperature protection: (automatically shut off the output after overtemperature)
- Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
- Installation:?two 3mm screws
- Dimensions(LxWxH): 54 x 23 x 15 mm
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
XL-6009 Dc To Dc Boost Converter Voltage Booster
-3%
Arduino, Arduino Boards & Components, Development KitsXL-6009 Dc To Dc Boost Converter Voltage Booster
?Key Features :
- Module properties: unfenced step-up (BOOST)
- The input voltage: 3-32 v
- Continuous adjustable output voltage: 5v-35 v
- Input current: 4 a (Max), no-load 18 ma
- Module size: 44.7 (mm) x21.7 (mm)
- Input mode: IN + input level is, the IN ? negative input
- Output mode: OUT + output level is, the OUT ? output is negative
- Conversion efficiency: < 94% (the lower the pressure difference, the greater the efficiency)
- Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ZB2L3 Battery Capacity Tester External Load Discharge Type Module
-3%
Arduino, Arduino Boards & Components, Development KitsZB2L3 Battery Capacity Tester External Load Discharge Type Module
?Key Features :
- Power supply voltage: DC4.5-6V (micro USB connector)
- Operating current: Less than 70mA
- Discharge voltage: 1.00V-15.00V, 0.01V resolution
- Termination voltage range: 0.5-11.0V
- Supported current: Maximum 3.000A, 0.001A resolution
- Maximum voltage measurement error: 1% + 0.02V
- Maximum current measurement error: 1.5% ? 0.008A
- Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value is switched by shifting the decimal point, when it is less than 10Ah will display X.XXX, up to 10Ah or more will display XX.XX, and so on.
- Board size: 50 x 37mm
- Finished size: 50 x 37 x 17mm (L x W x H maximum position size, contains copper foot height)
- Board net weight: 28g (including pillars)
- Resistor weight: about 27g (including cable)
SKU: n/a
