Shop
Showing 169–196 of 334 results
-
Arduino, Arduino Boards & Components, Development Kits
5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
-6%
Arduino, Arduino Boards & Components, Development Kits5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
?Key Features :
- Input: 5 V 1A
- Charging and discharging indication
- Size: approximately 22mm * width 17mm * thickness 11mm
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ?1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
- Integration overcharging and over-discharging protection
- Support trickle mode and zero voltage charging
- Output:?5 V 1A
- Lithium voltage: 3 v-4.3 V
- Ports: Micro USB Android port.?USB port output
- When charging: red light flashing Full charged: red light for a long time
- Has protection functions, protects from overcharger/overload (supports charger and discharger at the same time)
SKU: n/a -
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers
7KW Solar Inverter – Pure Sine Wave Output
-58%
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers7KW Solar Inverter – Pure Sine Wave Output
Key Features
-
- High Load Capacity: Can operate up to 7KW load (e.g., 2 ACs of 1.5 tons each, a fridge, refrigerator, water pump, TV, 10 energy savers, 3 fans)
- Pure Sine Wave: Ensures smooth and reliable power output
- Flexible Solar Panel Compatibility: Can work with a minimum of 4 solar panels (585W each) to a maximum of 14 solar panels (585W each)
- Battery-less Operation: Efficiently runs without a battery
- Microcontroller Based: Enhances precision and reliability
- Designed with Super High-Quality and High-Efficiency Components: Ensures longevity and superior performance
- User-Friendly LCD Display: Shows PV voltage, output voltage, running current, voltage, frequency, etc.
- Low Installation Cost: Cost-effective setup
- Easy Installation: Hassle-free setup process
- Low-Cost Repairs: Affordable maintenance and repair costs
- Only an?additional metal box with a fan and on/off switch is required.
- Front Panel with Configuration and Monitoring Buttons: Allows easy configuration and monitoring of inverter parameters
- Designed and Assembled in China: Built on high-quality PCB from the hi-tech industry of China
- Affordable and Accessible: High-quality performance at a reasonable price
- WAPDA Sharing Capability: Possible by adding two high-quality bridges (minimum 100A/100V capacity) inside or outside the box
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
A4988 A4988 Stepper Motor Driver
?Key Features :
-
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 ? 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Active Low Level Trigger Buzzer Alarm Module
-6%
Arduino, Arduino Boards & Components, Development KitsActive Low Level Trigger Buzzer Alarm Module
?Key Features :
- Product Name:3.3 to 5V Active Buzzer Alarm Module Sensor And 3 Pin TTL Cable
- The Transistor drive module uses 8550
- With fixed bolt hole- easy installation- 2.6mm aperture.
- Operating voltage 3.3V-5V
- PCB dimensions: 34.28 mm (L) * 13.29 mm (W) * 11.5 mm (H)
- Wire length: 20.5cm
- Weight: 7 gm.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Active Piezo Buzzer 3v To 12V Active Buzzer for Arduino
-7%
Arduino, Arduino Boards & Components, Development KitsActive Piezo Buzzer 3v To 12V Active Buzzer for Arduino
?Key Features :
- Piezo sounders contain a piezoelectric vibration plate (also known as a piezo element) within a molded case.
- Sound is emitted when a voltage is applied and the piezo element inside the case vibrates.
- Piezo buzzers generally use less current.
- Have a higher sound output and a wider operating voltage.
- Buzzers and Sounders can also be split into Audio Indicators and Audio Transducers.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ADXL-1345 Tripple Axis Accelerometer Module
-3%
Arduino, Arduino Boards & Components, Development KitsADXL-1345 Tripple Axis Accelerometer Module
?Key Features :
-
- Voltage ? Supply : 3.3 V/ 5V.
- Interface 😕I?C, SPI.
- Sensing Range 😕?2g, 4g, 8g, 16g.
- Sensitivity:
- X : 28.6 LSB/g.
- Y : 31.2 LSB/g.
- Z : 34.5 LSB/g.
- Sensor Type 😕Accelerometer 3 Axis.
- Dimensions : 28 mm x 14 mm.
- Weight : 10 gm.
- Ultra Low Power: 40?A in measurement mode, 0.1?A in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
- Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command
- Wide temperature range (?40?C to +85?C).
- 10,000 g shock survival.
- Support 5V/3.3V voltage input, on-board RT9161 power chip, lower pressure drop faster than the 1117, faster load speed of response, very suitable for high-noise power supply environment.
- User-selectable resolution
- Fixed 10-bit resolution.
- Full resolution, where resolution increases with?g?range, up to 13-bit resolution at ?16?g?(maintaining 4 mg/LSB scale factor in all?g?ranges).
SKU: n/a -
-
-
Airpods & Handfree, Mobile Phone Accessories
AirPods Pro For Apple & Android
Key Features
- Active noise cancellation for immersive sound
- Transparency mode for hearing and connecting with the world around you
- Three sizes of soft, tapered silicone tips for a customizable fit
- Sweat and water-resistant
- Adaptive EQ automatically tunes the music to the shape of your ear
- Easy setup for all your Apple & Android devices
- The Wireless Charging Case delivers more than 24 hours of battery life
SKU: n/a -
1-phase Inverters, Arduino Boards & Components, Capacitors, i) Resistor, Capacitor, Inductor, Transistor etc., Solar Inverters/ Chargers
Aluminum Electrolytic Capacitor 470UF/450V 30x45mm
-55%
1-phase Inverters, Arduino Boards & Components, Capacitors, i) Resistor, Capacitor, Inductor, Transistor etc., Solar Inverters/ ChargersAluminum Electrolytic Capacitor 470UF/450V 30x45mm
Key Features
- Built to the toughest international standards for capacitors
- Colors may vary slightly due to different monitors and different photo shooting conditions.
- Photo does not show the actual size. See the description for size details.
- Marker code on every electrolytic capacitor, and with a lable mark capacitor value, easy to distinguish
- Compact, lightweight, and highly reliable capacitor
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%
Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Due
Key Features
- Microcontroller : Atmel SAM3X8E ARM Cortex-M3
- CPU: 32-Bit
- Digital I/O: Pins54
- PWM Output: 12
- PWM Output: 12
- Analog Input: 12
- Analog Input: 12
- Flash Memory (Program Memory): 512 KB
- SRAM96KB (two banks: 64KB and 32KB)
- Operating Voltage: 3.3V
- Input Voltage: 7-12 V
- Oscillator up to 84 MHz
- Arduino Due is open-source hardware! You can build your own board using the following files
- Click Here to Download Open Source Arduino Software
- EAGLE FILES IN .ZIP
- SCHEMATICS
- FRITZING IN .FZPZ
- BOARD SIZE .IN
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Leonardo
Key Features
- MICROCONTROLLER: ATmega32u4
- OPERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMITS): 6-20V
- DIGITAL I/O PINS: 20
- PWM CHANNELS: 7
- ANALOG INPUT CHANNELS: 12
- DC CURRENT PER I/O PIN: 40 mADC
- CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 32 KB (ATmega32u4) of which 4 KB used by bootloader
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- CLOCK SPEED: 16 MHz
- LENGH: 68.6 mm
- WIDTH: 53.3 mm
- WEIGHT: 20 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino MEGA 2560 PRO Mini
Key Features
- Item type:MEGA 2560 Pro Embedded USB CH340G ATMEGA2560-16AU Chip
- Form factor-Mega PRO
- Microcontroller-ATmega 2560 (16 MHz)
- USB-UART-CH340G interface (12 MHz)
- input voltage-6-9 V (peack 18 V)
- PC-MicroUSB connection socket
- 70 digital I / O
- 16 analog entries
- 14 PWM
- 4 UART bus
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino MEGA2560
Key Features
- PERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMIT): 6-20V
- DIGITAL I/O PINS: 54 (of which 15 provide PWM output)
- ANALOG INPUT PINS: 16DC
- CURRENT PER I/O PIN20 mADC CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 256 KB of which 8 KB used by bootloader
- SRAM: 8KB
- EEPROM: 4 KB
- CLOCK SPEED16 MHz
- LED_BUILTIN13
- LENGTH: 101.52 mm
- WIDTH: 53.3 mm
- WEIGHT: 37 g
- Click Here to Download Open Source Arduino Software
- EAGLE FILES IN .ZIP
- SCHEMATICS
- BOARD SIZE .IN
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Micro
Key Features
- MICROCONTROLLER: ATmega32U4
- OPERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMIT): 6-20V
- DIGITAL I/O PINS: 20
- PWM CHANNELS: 7
- ANALOG INPUT CHANNELS: 12
- DC CURRENT PER I/O PIN: 20 mA
- DC CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 32 KB (ATmega32U4) of which 4 KB used by bootloader
- SRAM: 2.5 KB (ATmega32U4)
- EEPROM: 1 KB (ATmega32U4)
- CLOCK SPEED: 16 MHz
- LED_BUILTIN: 13
- LENGTH: 48 mm
- WIDTH: 18 mm
- WEIGHT: 13 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Nano
Key Features
- MICROCONTROLLER: ATmega328
- ARCHITECTURE: AVR
- OPERATING VOLTAGE: 5 V
- FLASH MEMORY: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- CLOCK SPEED: 16 MHz
- ANALOG IN PINS: 8
- EEPROM: 1 KB
- DC CURRENT PER I/O PINS: 40 mA (I/O Pins)
- INPUT VOLTAGE: 7-12 V
- DIGITAL I/O PINS: 22 (6 of which are PWM)
- PWM OUTPUT: 6
- POWER CONSUMPTION: 19 mA
- PCB SIZE: 18 x 45 mm
- WEIGHT: 7 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Nano MEGA328P-without Wire
Key Features:
- The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino, so pls. use the driver from our site.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
- Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Pro Micro
Key Features
- Host port: USB Micro B
- Microcontroller: ATMega32U4
- MPU: AVR (8-bit)
- Voltage: 3.3V or 5V
- Clock speed: 8 MHz or 16 MHz
- Digital I/O pins: 18
- RAM: 2.5 KB
- Program memory: 32 KB
- EEPROM: 1 KB
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Pro Mini 5V 16MHz
Key Features
- Microcontroller: ATmega328
- Board Power Supply: 5 – 12 V (5V model)
- Circuit Operating Voltage: 5V
- Digital I/O Pins: 14
- PWM Pins: 6
- UART: 1
- SPI: 1
- I2C: 1
- Analog Input Pins: 6
- External Interrupts: 2
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32KB of which 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Uno R3 SMD with USB Cable
Key Features
- The operating voltage is 5V
- The recommended input voltage will range from 7v to 12V
- The input voltage ranges from 6v to 20V
- Digital input/output pins are 14
- Analog i/p pins are 6
- DC Current for each input/output pin is 40 mA
- DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB
- SRAM is 2 KB
- EEPROM is 1 KB
- CLK Speed is 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Uno R3 with USB Cable
Key Features
- The operating voltage is 5V
- The recommended input voltage will range from 7v to 12V
- The input voltage ranges from 6v to 20V
- Digital input/output pins are 14
- Analog i/p pins are 6
- DC Current for each input/output pin is 40 mA
- DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB
- SRAM is 2 KB
- EEPROM is 1 KB
- CLK Speed is 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Blue 1602 LCD 16×2 for Soler Inverter
Key Features :
-
-
- 16 Characters x 2 Lines
- Green Backlight
- 5×7 Dot Matrix Character + Cursor
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Standard Type
- Works with almost any Microcontroller
-
SKU: n/a -
-
Single/Full Color (RGB) Panels/Modules, SMD Screens & Tickers
Blue P10 Single Color Outdoor DIP LED Module For Tickers
-10%
Single/Full Color (RGB) Panels/Modules, SMD Screens & TickersBlue P10 Single Color Outdoor DIP LED Module For Tickers
Key Features
- Full outdoor: IP65
- Size (W x H): 320 x 160 mm (320 x 160cm), 12.6 x 6.3 Inch
- Resolution (W x H): 32 x 16 = 512
- HUB Signal: HUB12
- Volt: 5v DC
- Brightness: 5000 cdm (nits)
- LED: DIP 5 mm
- Accessories: Rubber seal, data wire, power cable
- Can work with control card: U6A, U6B, U60, W60, U61, U62, U64, U6BN, WLP-XUA2, WLP-XUB1, etc.
- Display can Show: Text, Animation word, Time, Count, Lunar calendar
- Support simple animation characters
- Click Here to Download HD-U6A Software HD2018
SKU: n/a -
Single/Full Color (RGB) Panels/Modules, SMD Screens & Tickers
Blue P10 Single Color Outdoor SMD Module For Tickers
-10%
Single/Full Color (RGB) Panels/Modules, SMD Screens & TickersBlue P10 Single Color Outdoor SMD Module For Tickers
Key Features
- Blue P10 Single Color SMD Module For Tickers
- Full outdoor: IP64
- Size (W x H): 320 x 160 mm (320 x 160cm), 12.6 x 6.3 Inch
- Resolution (W x H): 32 x 16 = 512
- HUB Signal: HUB12
- Volt: 5v DC
- Brightness: 4500 cdm (nits)
- LED: DIP 5mm
- Accessories: Data Wire, Power Cable, 4-Magnets
- Can work with control card: U6A, U6B, U60, W60, U61, U62, U64, U6BN, WLP-XUA2, WLP-XUB1, etc.
- The display can Show: Text, Animation word, Time, Count, Lunar calendar
- Support simple animation characters
- Click Here to Download HD-U6A Software HD2018
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Cable for UNO
?Key Features :
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
CH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
-6%
Arduino, Arduino Boards & Components, Development KitsCH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
?Key Features :
- Dimensions: 53 x 18 x 7 (LxWxH) mm.
- Weight: 6gm.
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- USB to TTL conversion board used for STC microcontroller download DVD/ hard disk/router /GPS upgrade
- For STC Download: SCM must be a minimum system and external crystal oscillator
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
CP-2102 Usb To Serial Usb To Uart Ttl Serial Module
-2%
Arduino, Arduino Boards & Components, Development KitsCP-2102 Usb To Serial Usb To Uart Ttl Serial Module
?Key Features :
- Stable and reliable chipset CP2102.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector.
- 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
- Byte receive buffer; 640 byte transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40 to +85.
- Size: 42mm X 15mm.
- Weight: 4g
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
DC Volt Meter 3 wire DC 4.5 to 30V DC Red LED digital voltmeter module panel meter
-2%
Arduino, Arduino Boards & Components, Development KitsDC Volt Meter 3 wire DC 4.5 to 30V DC Red LED digital voltmeter module panel meter
?Key Features :
-
3 wire? 0-100V Red LED digital voltmeter module panel meter
- Sensing?Voltmeter: 0-100V.
- Power supply: DC4-30V
- Measuring range: 0-100V.
- Measurement accuracy: ?0.1%
- Refresh rate: about 200ms
- Display: 0.56 “digital tube
- Color: Red
- Operating current: Less than 8mA
- Operating temperature: -10?C to 65?C
- Input impedance:100K
- Overall dimension: 48*29*26mm
- Display LED color – Red
SKU: n/a -
