Arduino Boards & Components

?Key Features :

1. 1. 1. sensor adopts TR5000, high sensitivity
      2. sensitivity adjustable digital potentiometer to adjust (blue)
      3. modules can induction block from 0 to 3 cm
      4. 5 V working voltage of 3.3 V
      5. 5a output form the output analog voltage (0 to 5 v) B digital switch output (0 and 1)
      6. Has a fixed bolt hole, the work of the installation
      7. Small board PCB size: 3.5 cm * 1.5 cm
      8. The power indicator light (red) and digital switch output indicator light (green)
      9. Comparator USES the LM393 chips, work stability
      10. Three small plate interface specifications wire (4)
      11. 1 VCC external 3.3 V to 5 V
      12. 2 GND external GND
      13. 3 DO small plate digital output interface (0 and 1)
      14. 4 small AO plate analog output interface (0 to 5 v)

?Key Features :

• Ceramics thermoelectric Cooler semiconductor module TEC1-12706
• Small module.
• Its work is characterized by side refrigeration and side fever.
• Hot and cold on both sides of the temperature difference of 68 degrees
• Connected to the 12-volt power supply cooling piece on both sides there will be the difference in temperature, side cold side of the heat, do not long power cooler radiator, otherwise, it will cause cooler internal overheating and burning.
• Quality tested cooling cells.
• Solid-state, vibration-free, noise-free.
• Simple to install and operate.
• Fitted with 6-inch insulated leads

?Key Features :

1. LCD display.
2. High accuracy.
3. This thermometer can also be used to measure object temperature (baby milk, food, bath water) or ambient temperature.
4. Waterproof probe, easy to remove.
5. Powered by 2 x 1.5v LR44 button cell.
6. Comes with a probe that is easy to use.
7. Perfect for use in incubators, brooders, homebrew room at any other place, the monitoring of temperature and humidity required.

?Key Features :

1. LCD display.
2. High accuracy.
3. This thermometer can also be used to measure object temperature (baby milk, food, bath water) or ambient temperature.
4. Waterproof probe, easy to remove.
5. Powered by 2 x 1.5v LR44 button cell.
6. Comes with a probe that is easy to use.
7. Perfect for use in incubators, brooders, homebrew room at any other place, the monitoring of temperature and humidity required.

?Key Features :

1. Low power consumption
2. Power supply for 2 ~ 5.5V DC
3. Can replace the traditional touch of a button
4. Four M2 screws positioning holes for easy installation

?Key Features :

1. Holder material:12mm cold-roll steel sheets,blue Zinc plating
   Wheel material: White nylon PP material,wear resisting & handy
   Wheel diameter: 24mm
   Wheel face width: 13mm
   Mounting height: 32mm
   Plate size: 38*32（mm）
   Mounting hole diameter:4mm
   Mounting hole center distance:30*24（mm）
   Single wheel load:10kg
   Single wheel weight:0.04kg

?Key Features :

1. 1. 1. Temperature Control Range: Minus 50 to 110 C
      2. Resolution at -9.9 to 99.9: 0.1 C
      3. Resolution at all other temperatures: 1 C
      4. Measurement Accuracy: 0.1 C
      5. Control Accuracy: 0.1 C
      6. Refresh Rate: 0.5 Seconds
      7. Input Power (DC): 12V
      8. Measuring Inputs: NTC (10K 0.5%)
      9. Waterproof Sensor: 0.5M
      10. Output: 1 Channel Relay Output, Capacity: 10A

      Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.

?Key Features :

1. • Operating voltage: DC3-5V
   • Operating current: less than 20mA
   • Sensor Type: Analog
   • Detection Area: 40mmx16mm
   • Production process: FR4 double-sided HASL
   • Operating temperature: 10?-30? Humidity: 10% -90% non-condensing
   • Dimensions: 60mmx20mm

?Key Features :

1. Operating Current : 130 ~ 220mA
2. Operating Voltage : 2.5 ~ 6V
3. Flow Rate : 80 ~ 120 L/H
4. Maximum Lift : 40 ~ 110 mm
5. Driving Mode : DC, Magnetic Driving
6. Continuous Working Life : 500 hours
7. Material : Engineering Plastic
8. Outlet Outside Diameter : 7.5 mm
9. Outlet Inside Diameter : 5 mm

?Key Features :

1. Module properties: unfenced step-up (BOOST)
2. The input voltage: 3-32 v
3. Continuous adjustable output voltage: 5v-35 v
4. Input current: 4 a (Max), no-load 18 ma
5. Module size: 44.7 (mm) x21.7 (mm)
6. Input mode: IN + input level is, the IN ? negative input
7. Output mode: OUT + output level is, the OUT ? output is negative
8. Conversion efficiency: < 94% (the lower the pressure difference, the greater the efficiency)
9. Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)

?Key Features :

1. Power supply voltage: DC4.5-6V (micro USB connector)
2. Operating current: Less than 70mA
3. Discharge voltage: 1.00V-15.00V, 0.01V resolution
4. Termination voltage range: 0.5-11.0V
5. Supported current: Maximum 3.000A, 0.001A resolution
6. Maximum voltage measurement error: 1% + 0.02V
7. Maximum current measurement error: 1.5% ? 0.008A
8. Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value is switched by shifting the decimal point, when it is less than 10Ah will display X.XXX, up to 10Ah or more will display XX.XX, and so on.
9. Board size: 50 x 37mm
10. Finished size: 50 x 37 x 17mm (L x W x H maximum position size, contains copper foot height)
11. Board net weight: 28g (including pillars)
12. Resistor weight: about 27g (including cable)