?Key Features :

1. Motor size: 10*12 (N20 motor)
2. Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
3. Shaft length: 8mm
4. Weight: 10g
5. Rated load : 200 g.cm
6. Working temperature: -10 degrees – 65 degrees
7. Motor mounting position: horizontal or vertical
8. Reduction ratio : 1:298
9. Rated voltage: DC 5V?
10. Rated current : 36 MA
11. Rated load speed: 50RPM
12. Stall torque: 1 KG.cm
13. Operating voltage range : DC3V-6V

?Key Features :

1. Mechanical structure, easy to install.
2. This car has tachometer encoder
3. With 4 cell AA battery holder and power switch.
4. Can be used for distance measurement, velocity.
5. Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
6. Gear Motor reduction radio: 1:48.
7. Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
8. Note: motor power supply is 3V~6V.

?Key Features :

1. 1. 1. Temperature Control Range: Minus 50 to 110 C
      2. Resolution at -9.9 to 99.9: 0.1 C
      3. Resolution at all other temperatures: 1 C
      4. Measurement Accuracy: 0.1 C
      5. Control Accuracy: 0.1 C
      6. Refresh Rate: 0.5 Seconds
      7. Input Power (DC): 12V
      8. Measuring Inputs: NTC (10K 0.5%)
      9. Waterproof Sensor: 0.5M
      10. Output: 1 Channel Relay Output, Capacity: 10A

      Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.

?Key Features :

• • • Current Sense for each motor
    • Heatsink for better performance
    • Power-On LED indicator
    • Dual H Bridge Motor Driver
    • L298N motor driver IC
    • Drives up to 2 bidirectional DC motors
    • Integrated 5V power regulator
    • 5V ? 35V drive voltage
    • 2A max drive current

?Key Features :

1. Input voltage range?4?38VDC(Note: input voltage not exceeding 38V).
2. Output voltage range?1.25-36VDC adjustable.
3. Output current:?0-5A.
4. High efficiency up to 96%.
5. Output power:?75W.
6. Built-in thermal shutdown function
7. Built-in current limit function
8. In-Built output short protection function
9. Input reverse polarity protection: None (if required, the high current diode in series with the input).
10. Power Indicator:?Yes
11. Short circuit protection: Yes (limit current 8A)
12. Overtemperature protection: (automatically shut off the output after overtemperature)
13. Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
14. Installation:?two 3mm screws
15. Dimensions(LxWxH): 54 x 23 x 15 mm

?Key Features :

1. 1. 1. sensor adopts TR5000, high sensitivity
      2. sensitivity adjustable digital potentiometer to adjust (blue)
      3. modules can induction block from 0 to 3 cm
      4. 5 V working voltage of 3.3 V
      5. 5a output form the output analog voltage (0 to 5 v) B digital switch output (0 and 1)
      6. Has a fixed bolt hole, the work of the installation
      7. Small board PCB size: 3.5 cm * 1.5 cm
      8. The power indicator light (red) and digital switch output indicator light (green)
      9. Comparator USES the LM393 chips, work stability
      10. Three small plate interface specifications wire (4)
      11. 1 VCC external 3.3 V to 5 V
      12. 2 GND external GND
      13. 3 DO small plate digital output interface (0 and 1)
      14. 4 small AO plate analog output interface (0 to 5 v)