Shop

?Key Features :

1. Holder material:12mm cold-roll steel sheets,blue Zinc plating
   Wheel material: White nylon PP material,wear resisting & handy
   Wheel diameter: 24mm
   Wheel face width: 13mm
   Mounting height: 32mm
   Plate size: 38*32（mm）
   Mounting hole diameter:4mm
   Mounting hole center distance:30*24（mm）
   Single wheel load:10kg
   Single wheel weight:0.04kg

Key Features:

• NEW IMPROVEMENT: Clear prints on the female header connector, more precise and easier to use the wire.
• The ELEGOO UNO R3 BOARD now uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
• Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3)
• 100% compatible with the Arduino IDE and RoHS Compliant
• The Uno board can be powered via the USB connection.
• The Uno board can be powered with an external power supply.
• Excellent welding and production quality to make sure satisfied customer experience
• The RX and TX LEDs on the board will flash when data is being transmitted via the USB-to-serial chip and USB connection to the computer.
• We have always cared about the customer experience and improve the product function details.

?Key Features :

1. 1. 1. ABS flame retardant housing is avirulent and environmental protective, long service life and will not discolor or be out of shape
      2. Wide temperature control range from -50? to 110? and high-temperature control precision of 0.1?
      3. Can be installed directly or embedded in industrial control equipment panel, convenient and quick
      4. Widely used in the hatching area, equipment case, air conditioning system, temperature control protection, and other fields
      5. The probe used stainless steel material shell and resin sealing treatment, waterproof and does not rust

?Key Features :

1. Operating Current : 130 ~ 220mA
2. Operating Voltage : 2.5 ~ 6V
3. Flow Rate : 80 ~ 120 L/H
4. Maximum Lift : 40 ~ 110 mm
5. Driving Mode : DC, Magnetic Driving
6. Continuous Working Life : 500 hours
7. Material : Engineering Plastic
8. Outlet Outside Diameter : 7.5 mm
9. Outlet Inside Diameter : 5 mm

?Key Features :

1. Input voltage range?4?38VDC(Note: input voltage not exceeding 38V).
2. Output voltage range?1.25-36VDC adjustable.
3. Output current:?0-5A.
4. High efficiency up to 96%.
5. Output power:?75W.
6. Built-in thermal shutdown function
7. Built-in current limit function
8. In-Built output short protection function
9. Input reverse polarity protection: None (if required, the high current diode in series with the input).
10. Power Indicator:?Yes
11. Short circuit protection: Yes (limit current 8A)
12. Overtemperature protection: (automatically shut off the output after overtemperature)
13. Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
14. Installation:?two 3mm screws
15. Dimensions(LxWxH): 54 x 23 x 15 mm

?Key Features :

1. Module properties: unfenced step-up (BOOST)
2. The input voltage: 3-32 v
3. Continuous adjustable output voltage: 5v-35 v
4. Input current: 4 a (Max), no-load 18 ma
5. Module size: 44.7 (mm) x21.7 (mm)
6. Input mode: IN + input level is, the IN ? negative input
7. Output mode: OUT + output level is, the OUT ? output is negative
8. Conversion efficiency: < 94% (the lower the pressure difference, the greater the efficiency)
9. Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)

?Key Features :

1. Power supply voltage: DC4.5-6V (micro USB connector)
2. Operating current: Less than 70mA
3. Discharge voltage: 1.00V-15.00V, 0.01V resolution
4. Termination voltage range: 0.5-11.0V
5. Supported current: Maximum 3.000A, 0.001A resolution
6. Maximum voltage measurement error: 1% + 0.02V
7. Maximum current measurement error: 1.5% ? 0.008A
8. Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value is switched by shifting the decimal point, when it is less than 10Ah will display X.XXX, up to 10Ah or more will display XX.XX, and so on.
9. Board size: 50 x 37mm
10. Finished size: 50 x 37 x 17mm (L x W x H maximum position size, contains copper foot height)
11. Board net weight: 28g (including pillars)
12. Resistor weight: about 27g (including cable)