arduino due

?Key Features :

• • • It?s efficient up to?93%
    • It can source a good amount of current
    • It is an inexpensive converter module
    • It?s simple to adjust to get your desired increase in voltage
    • 4-bit or 8-bit MPU Interface
    • Standard Type
    • Works with almost any Microcontroller

?Key Features :

1. Motor size: 10*12 (N20 motor)
2. Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
3. Shaft length: 8mm
4. Weight: 10g
5. Rated load : 200 g.cm
6. Working temperature: -10 degrees – 65 degrees
7. Motor mounting position: horizontal or vertical
8. Reduction ratio : 1:298
9. Rated voltage: DC 5V?
10. Rated current : 36 MA
11. Rated load speed: 50RPM
12. Stall torque: 1 KG.cm
13. Operating voltage range : DC3V-6V

?Key Features :

1. 1 ? Arduino Uno R3
2. 1 ? USB Cable for Arduino Uno and Arduino Mega
3. 1 ? Arduino Infrared Remote
4. 1 ? IR Transmitter LED 5mm Infrared Transmitter
5. 1 ? KY-028 Ky028 Temperature Sensor Module
6. 20 ? 20cm Pin to Pin 1 Pin Jumper Wire Dupont Line (Arduino Male to Male)
7. 20 ? 20cm Pin to Hole 1 Pin Jumper Wire Dupont Line (Arduino Male to Female)
8. 1 ? MB102 Breadboard 830 Points Solderless Prototyping Breadboard
9. 1 ? 2.54mm Pitch 40 Pin Male Header
10. 1 ? 2.54mm Pitch 40 Pin Single Row Female Header Strip
11. 1 ? Towerpro Sg90 Sg 90 180 Degree Servo Motor
12. 1 ? 24BYJ High Torque Geared Stepper Motor
13. 1 ? DC 2V to 24V 5100 RPM High Torque Mini Micro Motor

?Key Features :

1. Sensor Type:?Inductive
2. Sensing distance: 0.079″ (2mm)
3. Output Type😕 NPN-NO, 3-Wire
4. Response Frequency:?1.5kHz
5. Shielding: Shielded
6. Material:?Nickel-Plated Brass
7. Voltage: 10V ~ 40V
8. Termination style:?Cable leads
9. Operating Temperature: -40?C ~ 85?C
10. Package/case: Cylinder, Threaded – M12
11. Ingress Protection:?IP67
12. Indicator: LED

?Key Features :

1. The main chip: ISD1820.
2. Dimensions : 43 x 34 x 11 (LxWxH) mm.
3. The working voltage: DC 3V-5V.
4. Loudspeaker: 8 Ohm, 0.5W.
5. An easy to use 10 seconds of voice recording.
6. High-quality, natural voice restored.
7. Can be used as propaganda module.
8. With looping, jog playback, single-pass play function.
9. Available single-chip control.
10. This module can directly drive a small speaker 8 ohm 0.5W.
11. Power supply : 3-5V, which can be accessed pin power.
12. Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control.

?Key Features :

1. Model : KY-040.
2. Type : Incremental Encoder.
3. Cycles per revolution (CPR) : 20.
4. Working voltage : 0 ? 5V.
5. Material : PCB + Brass.
6. Weight : 10 gm.
7. Size : 32 x 19 x 30 mm.

?Key Features :

1. • small size, easy to use;
   • low voltage, low power consumption;
   • high accuracy;
   • strong anti-jamming;
   • integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions.

?Key Features :

1. PCB installed inside of?aluminum alloy U disk?shell, portable, safe and reliable!
2. Interface definition?directly marked on the shell, clear, convenient and practical!
3. 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
4. Shell characters using laser engraving, never fade off! Permanent clarity!
5. 500MA internal resettable fuse,?complete protection of your expensive computer motherboard!
6. Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition!
7. With 4 DuPont line, so you can easily respond to different target board line order!
8. Use anti-static bag packaging.

?Key Features :

1. LCD display.
2. High accuracy.
3. This thermometer can also be used to measure object temperature (baby milk, food, bath water) or ambient temperature.
4. Waterproof probe, easy to remove.
5. Powered by 2 x 1.5v LR44 button cell.
6. Comes with a probe that is easy to use.
7. Perfect for use in incubators, brooders, homebrew room at any other place, the monitoring of temperature and humidity required.

?Key Features :

1. • Modes?Toggle or switch.
   • Operating current @VDD=3V, no-load, SLRFTB=1.
   • The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V.
   • Sensitivity can adjust by the capacitance(0~50pF) outside.
   • Have two kinds of sampling length by pad option(SLRFTB pin).
   • Stable touching detection of the human body for replacing traditional direct switch key.
   • Provides Fast mode and Low Power mode selection by pad option(LPMB pin).
   • Provides direct mode toggle?mode by pad option(TOG pin), the open-drain mode by bonding option, OPDO pin is an open-drain output, Q pin is CMOS output.
   • All output modes can be selected active high or active low by pad option(AHLB pin).
   • Have the maximum on-time 100sec by pad option(MOTB pin).
   • Have external power-on reset pin(RST pin).
   • After power-on have about 0.5sec stable-time, during the time do not touch the keypad, And the function is disabled.
   • Auto calibration for life.
   • Re-calibration period is about 4.0sec when the key has not to be touched.

?Key Features :

1. Low power consumption
2. Power supply for 2 ~ 5.5V DC
3. Can replace the traditional touch of a button
4. Four M2 screws positioning holes for easy installation

?Key Features :

1. • Dimensions: 28 x 14 x 13 mm(LxWxH).
   • Weight: 4 gm.
   • Input Voltage range: DC0 to 25 V
   • Voltage detection range: DC 0.02445 V to 25 V
   • Analog Voltage resolution : 0.00489 V
   • Output Interface : ?+ ? connected 5/3.3V, ?-? connected GND, ?s? connected Arduino AD pins
   • DC input interface: red terminal positive with VCC, negative with GND
   • You can also use the IICLCD1602 LCD to display voltage.
   • By 3P connector, connect this module with the expansion of board Arduino, not only makes it easier for you to detect voltage battery.

?Key Features :

1. 1. 1. Temperature Control Range: Minus 50 to 110 C
      2. Resolution at -9.9 to 99.9: 0.1 C
      3. Resolution at all other temperatures: 1 C
      4. Measurement Accuracy: 0.1 C
      5. Control Accuracy: 0.1 C
      6. Refresh Rate: 0.5 Seconds
      7. Input Power (DC): 12V
      8. Measuring Inputs: NTC (10K 0.5%)
      9. Waterproof Sensor: 0.5M
      10. Output: 1 Channel Relay Output, Capacity: 10A

      Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.