datakom
Showing 1–28 of 30 results
-
Generator Battery Chargers
BP+0524M-305 24V/5A Battery Charger-CRE Technology France
Key Features
- Battery Charger (optimized size) 12VDC – 5A single phase
- Input Voltage: 90 to 305VAC
- Rail DIN mounting
- Switching frequency architecture
- Short-circuit protection
- Overload protection
- Over-voltage protection
- over-temperature protection
- Diode integrated
- 3 years warranty
- Click Here To Download Technical Specifications
- Click Here To Download Product Information
- Click Here To Download the Complete Catalog of CRE-Batt. Chargers
SKU: n/a -
Generator Battery Chargers
BP+1024M-305 24V/10A Battery Charger-CRE Technology France
Key Features
- Battery Charger (optimized size) 24VDC – 10A single phase
- Input Voltage: 90 to 305VAC
- Rail DIN mounting
- Switching frequency architecture
- Short-circuit protection
- Overload protection
- Over-voltage protection
- over-temperature protection
- Diode integrated
- 3 years warranty
- Click Here To Download Technical Specifications
- Click Here To Download Product Information
- Click Here To Download the Complete Catalog of CRE-Batt. Chargers
SKU: n/a -
Generator Battery Chargers
BP2024S 24V/20A Battery Charger-CRE Technology France
Key Features
- Battery Charger (optimized size) 24VDC – 20A single phase
- Input Voltage: 90 to 305VAC
- Rail DIN mounting
- Switching frequency architecture
- Short-circuit protection
- Overload protection
- Over-voltage protection
- over-temperature protection
- Diode integrated
- 3 years warranty
- Click Here To Download Technical Specifications
- Click Here To Download Product Information
- Click Here To Download the Complete Catalog of CRE-Batt. Chargers
SKU: n/a -
Generator Battery Chargers
BPR0512S 12V/5A Battery Charger-CRE Technology France
Key Features
- Battery Charger (optimized size) 12VDC – 5A single phase
- Protections: Short circuit/ Overload/ Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or TS-35/15
- LED indicator for power on
- FAULT relay contact
- No-load power consumption < 0.75W
- 100% full load burn-in test
- 3 years warranty
- Can be installed on DIN Rail
- Output relay
- Competitive price
- Click Here To Download Technical Documentation
- Click Here To Download Product Information
- Click Here To Download the Complete Catalog of CRE-Batt. Chargers
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
DKG207 Automatic Mains Failure And Remote Start Unit
-8%
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsDKG207 Automatic Mains Failure And Remote Start Unit
Key Features
- Automatic mains failure
- Engine control
- Gas engine support
- Generator protection
- Built-in alarms and warnings
- 3 phase mains voltage inputs
- 1 phase Genset voltage input
- 1 phase Genset CT input
- Engine oil pressure measurement
- Engine coolant temperature measurement
- Genset active power measurement
- Genset power factor measurement
- Periodic maintenance request indicator
- Engine hours counter
- Statistical counters
- Remote Start operation available
- Survives cranking dropouts
- Plug-in connection system for easy replacement
- Small dimensions (130x100x39mm)
- Low cost
- Click Here To Download DKG207 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DKG215 Manual And Remote Start Unit
Key Features
- Manual and remote starting and stopping
- Zero power consumption at rest
- Engine control mode available
- Generator protection
- Built-in alarms and warnings
- 1 phase Genset voltage input
- 1 phase Genset CT input
- Engine oil pressure measurement
- Engine coolant temperature measurement
- Engine fuel level measurement
- Genset active power measurement (single phase)
- Genset power factor measurement (single phase)
- Periodic maintenance request indicator
- Engine hours run counter
- Plug-in connection system for easy replacement
- Small dimensions (96x96x53mm)
- Low cost
- Click Here To Download DKG215 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units, Synchronization Units
DKG217 Manual And Remote Start Unit With Synchroscope And Check Sync Relay
-7%
Genset Products, Manual & Remote Start Units, Synchronization UnitsDKG217 Manual And Remote Start Unit With Synchroscope And Check Sync Relay
Key Features
- Manual starting and stopping
- Zero power consumption at rest
- Remote Start operation available
- LED bar graph synchroscope
- Programmable V, f, for check synch relay
- Engine control
- Generator protection
- Built-in alarms and warnings
- 3 phase Genset voltage inputs
- 1 phase Genset CT input
- 1 phase busbar voltage input
- Engine oil pressure measurement
- Engine coolant temperature measurement
- Genset active power measurement (single phase)
- Genset power factor measurement (single phase)
- Periodic maintenance request indicator
- Engine hours run counter
- Plug-in connection system for easy replacement
- Small dimensions (130x100x39mm)
- Low cost
- Click Here To Download DKG217 User Manual
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DKG307 Automatic Mains Failure Unit
Key Features
- True RMS measurementss
- ECU connection through J1939 CAN option -for CAN version Only
- MPU input option for MPU Version Only
- Dual genset mutual standby operation
- Event logging with time stamp and measurements
- Battery backed-up real-time clock
- Built-in daily/weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- Customer logo display capability
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG307 User Manual
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DKG309 Automatic Mains Failure Unit
Key Features
- True RMS measurements
- MPU input option
- Dual genset mutual standby operation
- Event logging with time stamp and measurements
- Battery backed-up real time clock
- Built in daily / weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- MODBUS communications
- Multiple language support
- Customer logo display capability
- 1A protected semiconductor outputs
- Configurable analogue inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG309 User Manual
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DKG507 Automatic Mains Failure Unit
Key Features
- True RMS measurements
- Dual Genset mutual standby operation
- Event logging with time stamp and measurement
- Battery backed-up real-time clock
- Built-in daily/weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- Multiple language support
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG507 User Manual
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products
DKG509 Automatic Mains Failure Unit
Key Features
- True RMS measurements
- ECU connection through J1939 CAN option
- Dual Genset mutual standby operation
- Event logging with time stamp and measurement
- Battery backed-up real-time clock
- Built-in daily/weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- Multiple language support
- Customer logo display capability
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG509 User Manual
SKU: n/a -
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, Multimeters
DKM405 Network Analyzer With Total Harmonic Distortion Display
-33%
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, MultimetersDKM405 Network Analyzer With Total Harmonic Distortion Display
Key Features
- True RMS measurements
- Total harmonic distortion display
- Max demand display
- Configurable relay output
- Energy pulse output capability
- Optically isolated, configurable digital input
- Active-reactive power counters
- Hour counter
- Voltage transformer ratio for MV applications
- Front panel programming
- Reduced panel depth
- Wide operating temperature range
- Sealed front panel (IP54)
- Plug-in connection system
- Click Here To Download DKM405 User Manual
SKU: n/a -
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, Multimeters
DKM411 Advance Network Analyzer With Internet Communication
-13%
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, MultimetersDKM411 Advance Network Analyzer With Internet Communication
Key Features
- 3.5 TFT LCD, 320×240 pixels
- Internal battery backed-up real-time clock
- Harmonic distortion display (63 harmonics)
- Oscilloscope, waveform display
- Phasor diagram display
- Max demand display
- User-configurable display screens
- 2 configurable relay outputs
- Free internet-based monitoring program
- 2 optoisolated, configurable digital inputs
- Dual active-reactive power counters
- Both mains & generator energy metering
- Configurable user counters
- Voltage transformer ratio for MV applications
- Password protected front panel programming
- Reduced panel depth
- Sealed front panel (IP54)
- Click Here To Download DKM411 User Manual
SKU: n/a -
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, Multimeters
MEA-11C Network Analyzer With RS485 Communication
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, MultimetersMEA-11C Network Analyzer With RS485 Communication
Key Features
- The measurement information of parameters can be read from the display
- 3 wire + neutral systems can be measured
- It supports the Modbus protocol on RS485 communication
- A Special PC software is available for download specified parameters
- The turn rate of the current transformer and the turn rate of the voltage transformer can be changed
- The specified parameters can be recorded in a static area with a timestamp
- The recorded parameters can be
- downloaded to PC using special software
- The electricity in wires can be seen from the symbols on the LCD instantly
- The device is protected with a password for authorized used
- Click Here To Download Connection Scheme
- Click Here To Download Technical Specifications
- Click Here To Download Technical Drawings
SKU: n/a -
Generator Battery Chargers
SMPS1210 12V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS1210-D 12V/10A Genset Battery Charger With Display
Key Features
- Output voltage and current display
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210-D User Manual
SKU: n/a -
Generator Battery Chargers
SMPS1210-FlyBack 12V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210-FlyBack User Manual
SKU: n/a -
Generator Battery Chargers
SMPS125 12V/5A Battery Charger for Generators
Key Features
- 100 KHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Plug-in connection system
- Click Here To Download SMPS125 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS2410 24V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS2410 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS245 24V/5A Genset Battery Charger
Key Features
- 100 KHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Plug-in connection system
- Click Here To Download SMPS245 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DKG155 Manual Start Genset Controller With Key Switch
-35%
Genset Products, Manual & Remote Start UnitsDKG155 Manual Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- Digital display of generator frequency
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Spare fault input
- Alarm output
- Two-part connectors for easy replacement
- Standard panel dimensions (72x72mm)
- Low cost
- Low failure rate
- Click Here To Download DKG155 User Manual
- Click Here To Download DKG155 Brochure
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE701 Manual & Auto Start Genset Controller With Key Switch
-18%
Genset Products, Manual & Remote Start UnitsDSE701 Manual & Auto Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Two-part connectors for easy replacement
- Standard panel dimensions (72x72mm)
- Low cost
- Low failure rate
- Click Here To Download DSE701 User Manual
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE702 Manual & Auto Start Genset Controller With Key Switch
-11%
Genset Products, Manual & Remote Start UnitsDSE702 Manual & Auto Start Genset Controller With Key Switch
Key Features
- Microprocessor controlled
- Manual fuel control and start
- Automatic shutdown on fault condition
- Survives cranking dropouts
- High engine temperature protection
- Low oil pressure protection
- Overspeed-under speed protection
- Hour run counter display
- Two-part connectors for easy replacement
- Standard panel dimensions (80mm x 68mm)
- Low cost
- Low failure rate
- Click Here To Download DSE702 User Manual
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
DSE704 AMF (Auto Mains Failure Controller)
-12%
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsDSE704 AMF (Auto Mains Failure Controller)
Key Features
- Automatic mains (utility) supply monitoring
- Automatic shutdown when fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Single/three-phase mains sensing
- Dimensions: 165mm x 125mm x 29mm (6.5 x 4.9 x 1.2); Cut-out Size: 149mm X 109mm (5.9 x 4.3)
- Low cost
- Low failure rate
- Click Here To Download DSE704 User Manual
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
EPH-102C AMF Auto Mains Failure Card For Generator
-30%
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsEPH-102C AMF Auto Mains Failure Card For Generator
Key Features
- Microprocessor controlled
- Low oil pressure protection
- Automatic fuel control and start
- Automatic shutdown on fault condition
- LED Indications for fault monitoring
- Screw type connectors for easy connection
- Survive cranking drop-outs
- High engine temperature protection
- Manual fuel control and start
- Low cost
- Adjustable times as per Gen Req.
- Low failure rate
- Low cost
- Low failure rate
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
EPH-106 AMF Auto Mains Failure Card For Generator
-25%
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsEPH-106 AMF Auto Mains Failure Card For Generator
Key Features
- Microprocessor controlled
- No need to put any extra timer
- Automatic fuel control and start
- Automatic shutdown on fault condition
- LEDs for fault monitoring
- Screw type connectors for easy connections
- Survive cranking drop-outs
- Small size
- Manual fuel control and start
- Low cost
- Adjustable self-time
- Low failure rate
SKU: n/a -
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
EPH300A AMF Auto Mains Failure Controller For Generator
-21%
Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsEPH300A AMF Auto Mains Failure Controller For Generator
Key Features
- Microprocessor controlled
- Low oil pressure protection
- Automatic fuel control and start
- Over-speed and under-speed protection
- Automatic shutdown on fault condition
- LED display for fault monitoring
- Survive cranking drop-outs
- Two-part connector for easy replacement
- Manual fuel control and start
- Standard panel dimensions (96x96mm)
- High engine temperature protection
- Low cost
- Low failure rate
SKU: n/a -
Genset Products, Synchronization Units
D700 Advanced Auto-Learning Genset Synchronization Controller
-40%
Genset Products, Synchronization UnitsD700 Advanced Auto-Learning Genset Synchronization Controller
D700 synchronization controller is tailored for the most demanding applications, and it can be used for
- Multi Genset synch & load share
- Mains synchronization
- Single Genset parallel with mains
- AMF unit (uninterrupted transfer)
- ATS unit (uninterrupted transfer)
- Remote start controller
- Manual start controller
- Engine controller
- Remote display panel
- Long term data record on a flash drive
- On-board Input&output extension
- Comprehensive synchronizing & load sharingcapabilities
- Built-in governor and AVR control
- Baseload (kW export) control
- Positive & negative kVAr export control
- Mains (Utility) decoupling protection
- 4-Line backlit LCD text display
- CAN AVR support
- Click Here To Download D700 User Manual
SKU: D700-Synch-TFT-Version
