Unbeatable Offer

AVR R230 Automatic Voltage Regulator For Generator of Leroy Somer
₨ 8,500.00-
-
Arduino, Arduino Boards & Components, Development Kits
Arduino Micro
Key Features
- MICROCONTROLLER: ATmega32U4
- OPERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMIT): 6-20V
- DIGITAL I/O PINS: 20
- PWM CHANNELS: 7
- ANALOG INPUT CHANNELS: 12
- DC CURRENT PER I/O PIN: 20 mA
- DC CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 32 KB (ATmega32U4) of which 4 KB used by bootloader
- SRAM: 2.5 KB (ATmega32U4)
- EEPROM: 1 KB (ATmega32U4)
- CLOCK SPEED: 16 MHz
- LED_BUILTIN: 13
- LENGTH: 48 mm
- WIDTH: 18 mm
- WEIGHT: 13 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIMPlus630-46624V Controller for Generator
-18%
Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIMPlus630-46624V Controller for Generator
Key Features
- 630-089 EIM (PREVIOUSLY 630-466) Interface 630-466 for gensets 24V
- 630-089 EIM is PREVIOUSLY 630-466
- The Engine Interface Module is a sealed engine mounted module that provided switching relays for the starter motor solenoid, glow plug and fuel solenoid.
- Use of the EIM 630-466 PLUS means that heavy currents such as fuel solenoid power are isolated from the control panel thus enabling individual protection of each of the circuits.
- Engine interface ModuleEIMPLUS630-46624V controller
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Active Low Level Trigger Buzzer Alarm Module
-6%
Arduino, Arduino Boards & Components, Development KitsActive Low Level Trigger Buzzer Alarm Module
?Key Features :
- Product Name:3.3 to 5V Active Buzzer Alarm Module Sensor And 3 Pin TTL Cable
- The Transistor drive module uses 8550
- With fixed bolt hole- easy installation- 2.6mm aperture.
- Operating voltage 3.3V-5V
- PCB dimensions: 34.28 mm (L) * 13.29 mm (W) * 11.5 mm (H)
- Wire length: 20.5cm
- Weight: 7 gm.
SKU: n/a
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%
Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
Key Features
- Back-lit icon LCD display
- Front panel editing
- LED and LCD alarm indication
- Power Save mode
- PC configurable
- 6 Digital inputs
- 4 Outputs (2 configurable)
- Configurable timers and alarms
- Remote Start input
- Generator voltage display
- Generator frequency display
- Battery voltage display
- Engine speed display
- Hours counter
- Engine pre-heat
- Click Here To Download DSE3110 User Manual
- Click Here To Download DSE3110 Data Sheet
SKU: n/a -
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
D200 Advanced Genset Controller
-25%
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsD200 Advanced Genset Controller
Key Features
- AMF unit with uninterrupted transfer
- ATS unit with uninterrupted transfer
- Remote start controller
- Manual start controller
- Engine controller
- Waveform display of V & I
- Harmonic analysis of V & I
- CTs at genset or load side
- Click Here To Download D200 User Manual
SKU: n/a -
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
D300 Advanced Genset Controller
-17%
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsD300 Advanced Genset Controller
Key Features
- AMF unit with uninterrupted transfer
- ATS unit with uninterrupted transfer
- Remote start controller
- Manual start controller
- Engine controller
- Remote display & control unit
- Waveform display of V & I
- Harmonic analysis of V & I
- CTs at Genset or load side
- Click Here To Download D300 User Manual
SKU: n/a
-
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers
Sunrox Hybrid Solar Inverter TL 6KW
-34%
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & ControllersSunrox Hybrid Solar Inverter TL 6KW
Key Features
-
-
Paralleling Capability: Connect up to 6 units for increased power output.
-
Smart Power Sharing: Reduces utility bills by optimizing power usage.
-
Battery Flexibility: Operates with or without batteries; compatible with Lithium and Lead Acid batteries.
-
Advanced BMS Charging: Smart charging and monitoring for Lithium Ion batteries.
-
Built-in Connectivity: WiFi & Bluetooth for smart monitoring via mobile devices.
-
Dual Output: Separate outputs for Smart and Critical Load management.
-
PV Input: Supports up to 7,000 Watts.
-
Colorful Display: 5-inch LCD with RGB display for easy monitoring.
-
Pure Sine Wave Output: Ensures clean and stable power.
-
Comprehensive Communication: RS232, CAN, and RS485 interfaces.
-
Versatile Operation: Compatible with both ON and OFF grid systems.
-
SKU: TL-Hybrid-6KW -
-
Arduino, Arduino Boards & Components, Development Kits
Water Level Sensor
?Key Features :
-
-
Operating voltage: DC3-5V
-
Operating current: less than 20mA
-
Sensor Type: Analog
-
Detection Area: 40mmx16mm
-
Production process: FR4 double-sided HASL
-
Operating temperature: 10?-30? Humidity: 10% -90% non-condensing
-
Dimensions: 60mmx20mm
-
SKU: n/a -
-
-
Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.
TP4056 type-C Lithium Battery Charging Board
-10%
Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.TP4056 type-C Lithium Battery Charging Board
- Inputs with?Type C?female, can be directly input to do with the phone charger rechargeable lithium battery,
- And still retains the input voltage wiring pads, can be very convenient DIY
- Input voltage:?5V
- Charging cut-off voltage:?4.2V ? 1%
- Maximum charge current:?1000mA
- Battery over-discharge protection voltage:?2.5V
- Battery overcurrent protection current:?3A
- Board size:?2.6 * 1.7CM
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
DC Volt Meter 3 wire DC 4.5 to 30V DC Red LED digital voltmeter module panel meter
-2%
Arduino, Arduino Boards & Components, Development KitsDC Volt Meter 3 wire DC 4.5 to 30V DC Red LED digital voltmeter module panel meter
?Key Features :
-
3 wire? 0-100V Red LED digital voltmeter module panel meter
- Sensing?Voltmeter: 0-100V.
- Power supply: DC4-30V
- Measuring range: 0-100V.
- Measurement accuracy: ?0.1%
- Refresh rate: about 200ms
- Display: 0.56 “digital tube
- Color: Red
- Operating current: Less than 8mA
- Operating temperature: -10?C to 65?C
- Input impedance:100K
- Overall dimension: 48*29*26mm
- Display LED color – Red
SKU: n/a -
-
Control Card, Full Color Controllers, Single & Dual LED Controllers, SMD Screens & Tickers
HD-U63 LED Control Card with USB Port
-13%
Control Card, Full Color Controllers, Single & Dual LED Controllers, SMD Screens & TickersHD-U63 LED Control Card with USB Port
Key Features
- Support module: Single color/ Dual color/Tricolor
- Control range: Single color: 512W*128H Dual color: 256W*128H Tri color: 320W*64H
- FLASH Capacity: 4M Byte
- Communication Port: U-Disk
- HUB signal: 8HUB12, 4HUB08
- Program Quantity: 1000pcs Programs. also can change program by button or remote if weld sensor (Remoter can select1-999 Programs)
- Area Quantity: 20 areas with separate zone, and separated special effects and border
- Display Showing: TextAnimation wordTimeCountLunar calendar Display effects
- Click Here to Download HD-U63 User Manual
- Click Here to Download HD-U63 Software HD2018
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Pro Mini 5V 16MHz
Key Features
- Microcontroller: ATmega328
- Board Power Supply: 5 – 12 V (5V model)
- Circuit Operating Voltage: 5V
- Digital I/O Pins: 14
- PWM Pins: 6
- UART: 1
- SPI: 1
- I2C: 1
- Analog Input Pins: 6
- External Interrupts: 2
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32KB of which 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Single/Full Color (RGB) Panels/Modules, SMD Screens & Tickers
Red P10 Single Color Outdoor SMD Module For Tickers
-10%
Single/Full Color (RGB) Panels/Modules, SMD Screens & TickersRed P10 Single Color Outdoor SMD Module For Tickers
Key Features
- Red P10 Single Color SMD Module For Tickers
- Full outdoor: IP64
- Size (W x H): 320 x 160 mm (320 x 160cm), 12.6 x 6.3 Inch
- Resolution (W x H): 32 x 16 = 512
- HUB Signal: HUB12
- Volt: 5v DC
- Brightness: 4500 cdm (nits)
- LED: DIP 5mm
- Accessories: Data Wire, Power Cable, 4-Magnets
- Can work with control card: U6A, U6B, U60, W60, U61, U62, U64, U6BN, WLP-XUA2, WLP-XUB1, etc.
- The display can Show: Text, Animation word, Time, Count, Lunar calendar
- Support simple animation characters
- Click Here to Download HD-U6A Software HD2018
SKU: n/a
Products Grid
-
Automatic Voltage Regulators (AVRs)
AVR EA04C Generator Automatic Voltage Regulator
Key Features
- Sensing & power Input: Voltage 160 ~ 265 / 300 ~ 550VAC DIP switch selectable
- Frequency: 45 / 55 Hz, selectable
- Output Voltage: Max. 63 VDC @ 240 VAC input
- Current: Continuous 4A Intermittent 7A for 60 sec.
- Resistance: Min. 15 ohm Max. 100 ohm
- Voltage Regulation: < 1% ( with 4% engine governing )
- Voltage Build-up: Residual voltage at AVR terminal > 5 VAC
- Dimensions: 101mm L * 69mm W * 47.3mm H
- Weight: 175 g 2%
SKU: n/a -
-
Control Card, Single & Dual LED Controllers, SMD Screens & Tickers
Single Color Control Card HD-U6A with USB Port
-60%
Control Card, Single & Dual LED Controllers, SMD Screens & TickersSingle Color Control Card HD-U6A with USB Port
Key Features
- Support single color module
- Various conventional scanning methods
- Control range Single color resolution 320W*32H
- FLASH Capacity 1M Byte
- Communication Port U-Disk
- HUB Signal 2HUB12
- Program Quantity 1000pcs Programs
- 4 areas with separate zone, and separated special effects and border
- Display Showing TextAnimation wordTimeCountLunar calendar
- Can support” TextAnimationPicture, Time, Timing display
- Program border, area border, and Custom design border
- More than 40 kinds of text effects display
- Support simple animation characters
- Support for hollow fonts, strokes, and other fonts, etc.
- Support for regional text background settings
- support Excel form to add directly
- Clock function
- Support calendar, analog clock, lunar calendar
- Timing & countdown display
- Support for multiple time zones
- Automatic switch screens
- Brightness setting by Customer by time period regulation
- Brightness adjustment Support two modes of brightness adjustment
- Test button, click to switch screen test status
- HUB12 to connect the display
- Click Here to Download HD-U6A User Manual
- Click Here to Download HD-U6A Software HD2018
SKU: n/a
-
Arduino, Arduino Boards & Components, Development Kits
Laser Diode Module 650nm 5v Laser Light Module Ky008
Arduino, Arduino Boards & Components, Development KitsLaser Diode Module 650nm 5v Laser Light Module Ky008
?Key Features :
- Voltage: 3.0 V ? 5 V.
- Output: red laser straightly(650nm).
- Driver: APC circuit.
- Size: ? 12.0 x35mm.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating temperature: -36 ~ 65?C.
- Pot size: 15 meters spot for ?10 mm ~ ?15.
- Outer diameter: 6 mm.
SKU: n/a
-
-
Control Card, Single & Dual LED Controllers, SMD Screens & Tickers
HD-U6BN LED Control Card with USB Port
-14%
Control Card, Single & Dual LED Controllers, SMD Screens & TickersHD-U6BN LED Control Card with USB Port
Key Features
- Types of control card Single Color/ Dual Color
- Control range Single color: Single color: 1024W*48H Dual color: 512W*48H Tricolor: 512W*24H
- Dual-color: 1024W * 48H 1024W * 24H
- Scan modes Static, 1/2 1/3,1/4 1/5 1/61/81/16 common modes etc.
- Communication type U-Disk
- Power supply +4.25.5V
- Power consumption 0.5W
- Work environment -20–75
- Installation dimension 65W*48 Hmm
- Application Range Used indoor-outdoor, semi-outdoor, Led Pharmacy Cross signs showing text, animation, time, clock etc.
- Languages Support All languages
- Click Here to Download HD-U6BN User Manual
- Click Here to Download HD-U6BN Software HD2018
SKU: n/a -
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers
Sunrox Hybrid Solar Inverter TL 6KW
-34%
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & ControllersSunrox Hybrid Solar Inverter TL 6KW
Key Features
-
-
Paralleling Capability: Connect up to 6 units for increased power output.
-
Smart Power Sharing: Reduces utility bills by optimizing power usage.
-
Battery Flexibility: Operates with or without batteries; compatible with Lithium and Lead Acid batteries.
-
Advanced BMS Charging: Smart charging and monitoring for Lithium Ion batteries.
-
Built-in Connectivity: WiFi & Bluetooth for smart monitoring via mobile devices.
-
Dual Output: Separate outputs for Smart and Critical Load management.
-
PV Input: Supports up to 7,000 Watts.
-
Colorful Display: 5-inch LCD with RGB display for easy monitoring.
-
Pure Sine Wave Output: Ensures clean and stable power.
-
Comprehensive Communication: RS232, CAN, and RS485 interfaces.
-
Versatile Operation: Compatible with both ON and OFF grid systems.
-
SKU: TL-Hybrid-6KW -
Crazy Discounts
-
Electronic Governors
EG2000 Electronic Engine Speed Governor Controller
Key Features
- Model: EG2000
- 100% Brand New And High Quality.
- Full closed-loop control technology.
- It is easy to install and can be pre-adjustments.
- Fast and accurate response to control engine speed.
- For input multiple machines or special purpose machines.
- High quality EG2000 electronic speed controller, stable performance.
- Click Here To Download EG2000 User Manual
SKU: n/a -
Control Card, Full Color Controllers, SMD Screens & Tickers
HD-R516 Receiving Card
Key Features
- R516, on-board 16*HUB75E ports compatible with: R500/R508/R512/ R512S/R516/R612, etc.
- With sending card: Dual-mode sending boxAsynchronous sending card, Synchronous sending card, Video processor of VP series.
Module type:Compatible with all common IC module, supported most PWM IC module.
Scan mode: Supports any scanning method from static to 1/64 scan
Communication method: Gigabit Ethernet
Control range: RecommendMaximum recommend131,072 pixels (128*1024) Outdoor module width 256, Indoor module width 128
Multi-card connection: Receiving card can be put in any sequence
Gray scale: 256~65536
Smart setting: A few simple steps to complete the smart settings, through the screen layout can be set to go with any alignment of the screen unit board
Test functions: Receiving card integrated screen test function, Test display brightness uniformity and display module flatness.
Communication distance: Super Cat5,Cat6 network cable within 80 meters
Port: 5V DC Power*2,1 Gbps Ethernet port*2, HUB75E*16
Input voltage: 4V-6V
Power: 5W - Click Here to Download HD-R516 User Manual
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
DRV8825 Stepper Motor Driver With Aluminum Heat Sink
-3%
Arduino, Arduino Boards & Components, Development KitsDRV8825 Stepper Motor Driver With Aluminum Heat Sink
?Key Features :
-
-
- Model:?DRV8825
- Supply Voltage:?8.2 ? 42 VDC.
- Current Capacity :?2.2A max(24V).
- Continuous current per phase:?1.5 A.
- Minimum Logic voltage:?2.5V.
- Maximum Logic Voltage:?5V.
- Microstep resolutions:?full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions?: 15 x 20 mm.
- Weight:?4 gm.
- Microstep resolutions:?full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor?s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45?V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3?V and 5?V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2?oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
-
SKU: n/a -
-
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers
7KW Solar Inverter – Pure Sine Wave Output
-58%
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers7KW Solar Inverter – Pure Sine Wave Output
Key Features
-
- High Load Capacity: Can operate up to 7KW load (e.g., 2 ACs of 1.5 tons each, a fridge, refrigerator, water pump, TV, 10 energy savers, 3 fans)
- Pure Sine Wave: Ensures smooth and reliable power output
- Flexible Solar Panel Compatibility: Can work with a minimum of 4 solar panels (585W each) to a maximum of 14 solar panels (585W each)
- Battery-less Operation: Efficiently runs without a battery
- Microcontroller Based: Enhances precision and reliability
- Designed with Super High-Quality and High-Efficiency Components: Ensures longevity and superior performance
- User-Friendly LCD Display: Shows PV voltage, output voltage, running current, voltage, frequency, etc.
- Low Installation Cost: Cost-effective setup
- Easy Installation: Hassle-free setup process
- Low-Cost Repairs: Affordable maintenance and repair costs
- Only an?additional metal box with a fan and on/off switch is required.
- Front Panel with Configuration and Monitoring Buttons: Allows easy configuration and monitoring of inverter parameters
- Designed and Assembled in China: Built on high-quality PCB from the hi-tech industry of China
- Affordable and Accessible: High-quality performance at a reasonable price
- WAPDA Sharing Capability: Possible by adding two high-quality bridges (minimum 100A/100V capacity) inside or outside the box
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Blue 1602 LCD 16×2 for Soler Inverter
Key Features :
-
-
- 16 Characters x 2 Lines
- Green Backlight
- 5×7 Dot Matrix Character + Cursor
- HD44780 Equivalent LCD Controller/driver Built-In
- 4-bit or 8-bit MPU Interface
- Standard Type
- Works with almost any Microcontroller
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Arduino Micro
Key Features
- MICROCONTROLLER: ATmega32U4
- OPERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMIT): 6-20V
- DIGITAL I/O PINS: 20
- PWM CHANNELS: 7
- ANALOG INPUT CHANNELS: 12
- DC CURRENT PER I/O PIN: 20 mA
- DC CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 32 KB (ATmega32U4) of which 4 KB used by bootloader
- SRAM: 2.5 KB (ATmega32U4)
- EEPROM: 1 KB (ATmega32U4)
- CLOCK SPEED: 16 MHz
- LED_BUILTIN: 13
- LENGTH: 48 mm
- WIDTH: 18 mm
- WEIGHT: 13 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TCRT5000 IR Sensor Module Line Tracking Line
-4%
Arduino, Arduino Boards & Components, Development KitsTCRT5000 IR Sensor Module Line Tracking Line
?Key Features :
-
-
- sensor adopts TR5000, high sensitivity
- sensitivity adjustable digital potentiometer to adjust (blue)
- modules can induction block from 0 to 3 cm
- 5 V working voltage of 3.3 V
- 5a output form the output analog voltage (0 to 5 v) B digital switch output (0 and 1)
- Has a fixed bolt hole, the work of the installation
- Small board PCB size: 3.5 cm * 1.5 cm
- The power indicator light (red) and digital switch output indicator light (green)
- Comparator USES the LM393 chips, work stability
- Three small plate interface specifications wire (4)
- 1 VCC external 3.3 V to 5 V
- 2 GND external GND
- 3 DO small plate digital output interface (0 and 1)
- 4 small AO plate analog output interface (0 to 5 v)
-
SKU: n/a -
Best Sellers
Recently Added
Indoor and Outdoor Temperature & Humidity Meter with High-Visibility P10 SMD Display

Indoor and Outdoor Temperature & Humidity Meter with High-Visibility P10 SMD Display
Key Features & Technical Specifications
High-Visibility Display: 32×16 resolution P10 SMD module provides superior brightness and clarity for excellent long-distance readability.
Rugged & Durable Build: Features a sturdy black aluminum casing that is completely rust-proof, ensuring longevity in diverse environments.
Dual-Purpose Design: Certified for reliable performance in both indoor and outdoor installations.
Universal Power: Simple plug-and-play operation on standard 220V AC.
Optimal Size: Compact dimensions of 13.5″ (W) x 6.75″ (H) x 2.1″ (D) offer a perfect balance of prominent display and space efficiency.
Superior Accuracy: Utilizes imported sensors and components for consistent, precise readings of temperature and humidity.
UT18D Uni-T Voltage and Continuity Tester
UT18B Voltage Detector Tester
Key Features:
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37

Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
UT181A True RMS Datalogging Multimeter
UT71E Series Intelligent Digital Multimeters

UT71E Series Intelligent Digital Multimeters
UT71C Series Intelligent Digital Multimeters

UT71C Series Intelligent Digital Multimeters
UT71A Series Intelligent Digital Multimeters

UT71A Series Intelligent Digital Multimeters
UT60BT Series Digital Multimeters
UT60EU Series Digital Multimeters












































