Arduino Boards & Components
Showing 29–56 of 108 results
-
Arduino, Arduino Boards & Components, Development Kits
Cable for UNO
?Key Features :
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
CH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
-6%Arduino, Arduino Boards & Components, Development KitsCH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
?Key Features :
- Dimensions: 53 x 18 x 7 (LxWxH) mm.
- Weight: 6gm.
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- USB to TTL conversion board used for STC microcontroller download DVD/ hard disk/router /GPS upgrade
- For STC Download: SCM must be a minimum system and external crystal oscillator
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
CP-2102 Usb To Serial Usb To Uart Ttl Serial Module
-2%Arduino, Arduino Boards & Components, Development KitsCP-2102 Usb To Serial Usb To Uart Ttl Serial Module
?Key Features :
- Stable and reliable chipset CP2102.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector.
- 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
- Byte receive buffer; 640 byte transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40 to +85.
- Size: 42mm X 15mm.
- Weight: 4g
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
DC Volt Meter 3 wire DC 4.5 to 30V DC Red LED digital voltmeter module panel meter
-2%Arduino, Arduino Boards & Components, Development KitsDC Volt Meter 3 wire DC 4.5 to 30V DC Red LED digital voltmeter module panel meter
?Key Features :
-
3 wire? 0-100V Red LED digital voltmeter module panel meter
- Sensing?Voltmeter: 0-100V.
- Power supply: DC4-30V
- Measuring range: 0-100V.
- Measurement accuracy: ?0.1%
- Refresh rate: about 200ms
- Display: 0.56 “digital tube
- Color: Red
- Operating current: Less than 8mA
- Operating temperature: -10?C to 65?C
- Input impedance:100K
- Overall dimension: 48*29*26mm
- Display LED color – Red
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
DHT11 Temperature And Humidity Sensor
?Key Features :
- Low power consumption.
- DHT11 sensor adopts
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Has a fixed bolt hole and easy installation
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
DHT22
?Key Features :
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
- Extra components not needed
- Long transmission distance
- Low power consumption
- 4 pins packaged and fully interchangeable
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
DRV8825 Stepper Motor Driver With Aluminum Heat Sink
-3%Arduino, Arduino Boards & Components, Development KitsDRV8825 Stepper Motor Driver With Aluminum Heat Sink
?Key Features :
-
-
- Model:?DRV8825
- Supply Voltage:?8.2 ? 42 VDC.
- Current Capacity :?2.2A max(24V).
- Continuous current per phase:?1.5 A.
- Minimum Logic voltage:?2.5V.
- Maximum Logic Voltage:?5V.
- Microstep resolutions:?full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions?: 15 x 20 mm.
- Weight:?4 gm.
- Microstep resolutions:?full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor?s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45?V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3?V and 5?V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2?oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
DS1302 (Real Time Clock Ds1307 Ds 1307 Rtc I2c Module At24c32)
-3%Arduino, Arduino Boards & Components, Development KitsDS1302 (Real Time Clock Ds1307 Ds 1307 Rtc I2c Module At24c32)
?Key Features :
-
- Two-wire I2C interface
- Hour: Minutes: Seconds AM/PM
- Leap year compensation
- Accurate calendar up to the year 2100
- Consumes Less than 500nA in Battery-Backup
- 1Hz output pin
- 56 Bytes of Non-volatile memory available to the user
- 4KB of serial electrically erasable and programmable read-only memory (EEPROM)
- Embed DS18B20 temperature sensor interface with the pull-up resistor.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
DS3231 (Precision Rtc Real Time Clock Module With Cell)
-2%Arduino, Arduino Boards & Components, Development KitsDS3231 (Precision Rtc Real Time Clock Module With Cell)
?Key Features :
-
- DS3231 based RTC with 2032 Battery Holder.
- Highly Accurate RTC Completely Manages All Timekeeping Functions.
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year, with Leap-Year Compensation Valid Up to 2100.
- Digital Temp Sensor Output.
- Register for Aging Trim.
- Configurable I2C device Address for AT24C32 using SMD jumpers on PCB (A0, A1, A2).
- Two Time-of-Day Alarms.
- Programmable Square-Wave Output Signal.
- Battery-Backup Input for Continuous Timekeeping.
- Low Power Operation Extends Battery-Backup Run Time.
- 3.3V Operation.
SKU: n/a -
-
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
dsPIC30F2010 Microchip
-9%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.dsPIC30F2010 Microchip
- High-Performance
- 16-bit Digital Signal Controllers
Modified Harvard architecture - C compiler-optimized instruction set architecture
- 83 base instructions with flexible addressing modes
- 24-bit wide instructions, 16-bit wide data path
- 12 Kbytes on-chip Flash program space
- 512 bytes on-chip data RAM
- 1 Kbyte nonvolatile data EEPROM
- 16 x 16-bit working register array
- Up to 30 MIPs operation:
– DC to 40 MHz external clock input
– 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x) - 27 interrupt sources
- Three external interrupt sources
- Eight user-selectable priority levels for each interrupt
- Four processor exceptions and software traps
- Click Here To Download dsPIC30F2010 Data Sheet
SKU: n/a -
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
dsPIC30F2010-30I/SO Microchip
-57%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.dsPIC30F2010-30I/SO Microchip
- High-Performance
- 16-bit Digital Signal Controllers
Modified Harvard architecture - ?C compiler-optimized instruction set architecture
- 83 base instructions with flexible addressing modes
- 24-bit wide instructions, 16-bit wide data path
- 12 Kbytes on-chip Flash program space
- 512 bytes on-chip data RAM
- 1 Kbyte nonvolatile data EEPROM
- 16 x 16-bit working register array
- Up to 30 MIPs operation:
– DC to 40 MHz external clock input
– 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x) - 27 interrupt sources
- Three external interrupt sources
- Eight user-selectable priority levels for each interrupt
- Four processor exceptions and software traps
- Click Here To Download dsPIC30F2010 Data Sheet
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ESP-01S Esp8266 Wifi Module
?Key Features :
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 1?1 MIMO, 2?1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ESP32+cp2102 Wroom Esp32 Wifi Based Microcontroller Development Board Nodemcu
-2%Arduino, Arduino Boards & Components, Development KitsESP32+cp2102 Wroom Esp32 Wifi Based Microcontroller Development Board Nodemcu
?Key Features :
-
- 100% brand new and high quality.
- ESP32 is already integrated antenna and RF balun,power amplifier,low-noise amplifiers,filters,and power management module.
- The entire solution takes up the least amount of printed circuit board area.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications.
- High performance-price ratio.
- Small volume,easily embeded to other products.
- Strong function with support LWIP protocol,Freertos.
- Supporting three modes:AP,STA,and AP+STA.
- Supporting Lua program,easily to develop.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Esp8266 Ch340 Lolin Nodemcu V3 Wifi Development Board Iot
-2%Arduino, Arduino Boards & Components, Development KitsEsp8266 Ch340 Lolin Nodemcu V3 Wifi Development Board Iot
?Key Features :
-
-
- Uses CH340G instead of CP2102.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Don?t need to download resetting
- A great set of tools to develop NODEMCU
- Lowest cost WI-FI
- FOR Arduino like hardware IO
- Greatly speed up your IOT application developing process
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- WI-FI MCU ESP12E integrated and easy to the prototyping development kit.
- We provide the best platform for IoT application development at the lowest cost.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
- Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
- Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
FireFlame Sensor
?Key Features :
-
- Product Name: Flame Sensor Module
- Output Channel: 1
- Power Supply: 3.3/5V
- PCB Board Size: 32 x 14mm(L*W)
- Hole Size: 3mm
- Material: Electric Part
- Net Weight 3g
- indicator light: a green one for the switch, a red one for power.
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Can detect fire or wavelength in 760 ~ 1100 nm nano within the scope of the light source.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
HC-05 Bluetooth Module
?Key Features :
-
- HC-05 Bluetooth Module In PakistanTTL Module (With EN Pin) Breakout is the latest Bluetooth wireless serial Module. This version of the popular Bluetooth module uses the HC-05. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
HC-06 Bluetooth Module
?Key Features :
-
-
- Works with any USB Bluetooth adapters.
- Default Baud Rate: 9600,8,1,n.
- Built in antenna.
- Coverage up to 30ft.
- Bluetooth version: V2.0+EDR
- Operating voltage: 3.3V
- Default Baud Rate: 9600,8,1,n.
- Signal coverage: 30ft
- Item size: 4.3 * 1.6 * 0.7cm
- Item weight: 3g
- Package size: 9 * 3 * 1cm
- Package weight: 8g
- Commercial Series: Bluetooth module board Series
- With LED indicator light, use 150mA and 3.3V regulation chip.
- With VCC.GND.TXD.RXD foot for the Bluetooth
- With ?Re-seach? button(ON/OFF/WAKE foot for it , external MCU outinput ?High level? can control module to re-seach)
- Compatible with bluetooth master module?.slave module?or master-slave(whole) module.
- Input voltage: 3.3~6V
- Size: 1.55cm*3.98cm
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Hc-SR 501 PIR Motion Sensor
?Key Features :
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time Can be Adjusted
- Blockade time: 2.5s (Default)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
HC-SR04 (5V) Ultrasonic Distance Sensor
?Key Features :
-
- Power Supply: +5V DC
- Quiescent Current : <2mA
- Working Current: 15mA
- Effectual Angle: <15?
- Ranging Distance : 2cm ? 400 cm/1? ? 13ft
- Resolution : 0.3 cm
- Measuring Angle: 30 degree
- Trigger Input Pulse width: 10uS minimum
- Dimension: 45mm x 20mm x 15mm
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Heart Puls Sensor
?Key Features :
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
HTC-1 Temperature Humidity Mete
?Key Features :
- Temperature and Humidity displayed in HUGE 1″ high numbers.
- MAX / MIN Humidity & Temperature are recorded automatically and can be reset by the user
- Fahrenheit or Celsius readout (changeable by selecting F or C on the back)
- 12 or 24 hour time modes (changeable by using MODE & ADJ button to set)
- ALARM function
- MONTH & DAY display available by pushing ADJ button
- Integrated back stand for desktop or table use OR hanging hole for wall mounting
- Power: ONE standard AAA 1 .5v Battery
- Time, and Temperature display, Humidity display; With the calendar, alarm clock and the maximum or?minimum value of humiture memory functions; the convert of temperature and degree?Fahrenheit, Talkclock.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
I2C PCF8574 IIC I2c Serial Interface Adapter Module Iic I2C LCD Module
-3%Arduino, Arduino Boards & Components, Development KitsI2C PCF8574 IIC I2c Serial Interface Adapter Module Iic I2C LCD Module
?Key Features :
-
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- The backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
- Size ?41.6 x 19.2 mm.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Imported 3wd Smart Robot Car Chassis Kit
?Key Features :
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported Original 4wd Smart Robot Car Chassis Kit
-3%Arduino, Arduino Boards & Components, Development KitsImported Original 4wd Smart Robot Car Chassis Kit
?Key Features :
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity.
- Large and stable Chassis, easy for expansion.
- Easy interface with Arduino development platform.
- Enormous space between middle & bottom chassis.
- This kit is great for DIY Learning, Academic Research, Hobby Projects and Robot Competitions.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
IR Infrared Obstacle Avoidance Sensor Module
-9%Arduino, Arduino Boards & Components, Development KitsIR Infrared Obstacle Avoidance Sensor Module
?Key Features :
-
-
- sensor adopts TR5000, high sensitivity
- sensitivity adjustable digital potentiometer to adjust (blue)
- modules can induction block from 0 to 3 cm
- 5 V working voltage of 3.3 V
- 5a output form the output analog voltage (0 to 5 v) B digital switch output (0 and 1)
- Has a fixed bolt hole, the work of the installation
- Small board PCB size: 3.5 cm * 1.5 cm
- The power indicator light (red) and digital switch output indicator light (green)
- Comparator USES the LM393 chips, work stability
- Three small plate interface specifications wire (4)
- 1 VCC external 3.3 V to 5 V
- 2 GND external GND
- 3 DO small plate digital output interface (0 and 1)
- 4 small AO plate analog output interface (0 to 5 v)
-
SKU: n/a -
-
Arduino Boards & Components, Diode, IGBT. MOSFET & SCR Modules, Manual & Remote Start Units
K75T60 IGBT 600V 75A For Solar Inverter
-22%Arduino Boards & Components, Diode, IGBT. MOSFET & SCR Modules, Manual & Remote Start UnitsK75T60 IGBT 600V 75A For Solar Inverter
Key Features
- Very low VCE (sat) 1.5V (typ.)
- Maximum Junction Temperature of 175?
- Short circuit withstand time 5micro seconds
- Positive temperature coefficient in VCE (sat)
- Very tight parameter distribution
- High ruggedness, temperature-stable behavior
- Very high switching speed
- Low Electro Magnetic Interference
- Very soft and fast recovery anti-parallel Emitter Controlled HE diode
- Pb-free lead plating
- RoHS compliant
SKU: n/a