-3%
, ,

ESP-01S Esp8266 Wifi Module

Arduino

 Key Features :

  1. 802.11 b/g/n
  2. Wi-Fi Direct (P2P), soft-AP
  3. Integrated TCP/IP protocol stack
  4. Integrated TR switch, balun, LNA, power amplifier and matching network
  5. Integrated PLLs, regulators, DCXO and power management units
  6. +19.5dBm output power in 802.11b mode
  7. Power down leakage current of <10uA
  8. 1MB Flash Memory
  9. Integrated low power 32-bit CPU could be used as an application processor
  10. SDIO 1.1 / 2.0, SPI, UART
  11. STBC, 1×1 MIMO, 2×1 MIMO
  12. A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  13. Wake up and transmit packets in < 2ms
  14. Standby power consumption of < 1.0mW (DTIM3)

 280.00  290.00

Compare

ESP-01S Esp8266 Wifi Module

Buy a complete range of Arduino boards and their component at a very cheap price from all over Pakistan. We are the one and only store in Pakistan providing our customers with a wide range of electronic products and components at a very reasonable price at their doorstep. You can buy Arduino  from all over Pakistan or by visiting Electronic Power House (EPH) and Tetralink Technologies (TLT) in Lahore.

Description

The ESP 01 or ESP8266 WiFi Module is a self-contained SOC. ESP8266 serial module has integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The esp8266 wifi module Arduino is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The esp 01 connect to wifi module is an extremely cost-effective board with a huge, and ever-growing, community.

Features & Specifications Of ESP8266 WiFi ESP-01 Serial Module:

  • 802.11 b/g/n
  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier and matching network
  • Integrated PLLs, regulators, DCXO and power management units
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • 1MB Flash Memory
  • Integrated low power 32-bit CPU could be used as an application processor
  • SDIO 1.1 / 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
brands

Arduino

Specifications:

  1. 802.11 b/g/n
  2. Wi-Fi Direct (P2P), soft-AP
  3. Integrated TCP/IP protocol stack
  4. Integrated TR switch, balun, LNA, power amplifier and matching network
  5. Integrated PLLs, regulators, DCXO and power management units
  6. +19.5dBm output power in 802.11b mode
  7. Power down leakage current of <10uA
  8. 1MB Flash Memory
  9. Integrated low power 32-bit CPU could be used as an application processor
  10. SDIO 1.1 / 2.0, SPI, UART
  11. STBC, 1×1 MIMO, 2×1 MIMO
  12. A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  13. Wake up and transmit packets in < 2ms
  14. Standby power consumption of < 1.0mW (DTIM3)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ESP-01S Esp8266 Wifi Module”

There are no reviews yet.