Unbeatable Offer
Save 9%
-9%


dsPIC30F2010 Microchip
₨ 3,200.00-
Automatic Voltage Regulators (AVRs)
AVR M16FA655A Automatic Voltage Regulator For Generator
Key Features
- Replacement part number: M16FA655A
- The voltage regulator type MARK V
- It is s suitable for Synchronous Generators of MARELLI MOTORI
- The regulator is fully insulated in order to maintain high reliabilityalso with severe
ambient conditions (high level of humidity, dust, salt atmosphere), and in case of high vibrations level. - The regulator is proper both for single and 3-phase generators.
- Click Here To Download M16FA655A User Manual
SKU: n/a -
Automatic Voltage Regulators (AVRs)
SR7-2G Mecc Alte Automatic Voltage Regulator AVR For Generator
-5%Automatic Voltage Regulators (AVRs)SR7-2G Mecc Alte Automatic Voltage Regulator AVR For Generator
Key Features
- SR-7 type voltage regulator is an advanced design electronic 5 Amp regulator.
- SR-7 running and during starting, also equipped with a complete protection system against operation conditions that could be dangerous for the machine.
- SR-7 type voltage regulator is an advanced design electronic 5 Amp regulator.
- Suitable for being used with all alternators and is standard supply for power outputs below 85 KV, both three-phase and single phase.Others:EA05A,KXT-2WC,KXT-2WC1B.
- Package Included: 1 x SR7 Automatic Voltage Regulator and Manual.
- Click Here To Download SR7-2G User Manual
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
XL-4015 Adjustable Dc To Dc Step Down 5a Buck Converter With Heatsink
-4%Arduino, Arduino Boards & Components, Development KitsXL-4015 Adjustable Dc To Dc Step Down 5a Buck Converter With Heatsink
?Key Features :
- Input voltage range?4?38VDC(Note: input voltage not exceeding 38V).
- Output voltage range?1.25-36VDC adjustable.
- Output current:?0-5A.
- High efficiency up to 96%.
- Output power:?75W.
- Built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
- Input reverse polarity protection: None (if required, the high current diode in series with the input).
- Power Indicator:?Yes
- Short circuit protection: Yes (limit current 8A)
- Overtemperature protection: (automatically shut off the output after overtemperature)
- Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
- Installation:?two 3mm screws
- Dimensions(LxWxH): 54 x 23 x 15 mm
SKU: n/a
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
N20 DC Gear Motor
?Key Features :
- Motor size: 10*12 (N20 motor)
- Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
- Shaft length: 8mm
- Weight: 10g
- Rated load : 200 g.cm
- Working temperature: -10 degrees – 65 degrees
- Motor mounting position: horizontal or vertical
- Reduction ratio : 1:298
- Rated voltage: DC 5V?
- Rated current : 36 MA
- Rated load speed: 50RPM
- Stall torque: 1 KG.cm
- Operating voltage range : DC3V-6V
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
?Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling?mills?Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported 3wd Smart Robot Car Chassis Kit
?Key Features :
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported Original 4wd Smart Robot Car Chassis Kit
-3%Arduino, Arduino Boards & Components, Development KitsImported Original 4wd Smart Robot Car Chassis Kit
?Key Features :
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity.
- Large and stable Chassis, easy for expansion.
- Easy interface with Arduino development platform.
- Enormous space between middle & bottom chassis.
- This kit is great for DIY Learning, Academic Research, Hobby Projects and Robot Competitions.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
W1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
-4%Arduino, Arduino Boards & Components, Development KitsW1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
?Key Features :
-
-
- Temperature Control Range: Minus 50 to 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Universal Wheel For Smart Car Robot Omni Wheel
-8%Arduino, Arduino Boards & Components, Development KitsUniversal Wheel For Smart Car Robot Omni Wheel
?Key Features :
- Holder material:12mm cold-roll steel sheets,blue Zinc plating
Wheel material: White nylon PP material,wear resisting & handy
Wheel diameter: 24mm
Wheel face width: 13mm
Mounting height: 32mm
Plate size: 38*32(mm)
Mounting hole diameter:4mm
Mounting hole center distance:30*24(mm)
Single wheel load:10kg
Single wheel weight:0.04kg
SKU: n/a - Holder material:12mm cold-roll steel sheets,blue Zinc plating
-
Arduino, Arduino Boards & Components, Development Kits
Orginal UNO starter kit
?Key Features :
- 1 ? Arduino Uno R3
- 1 ? USB Cable for Arduino Uno and Arduino Mega
- 1 ? Arduino Infrared Remote
- 1 ? IR Transmitter LED 5mm Infrared Transmitter
- 1 ? KY-028 Ky028 Temperature Sensor Module
- 20 ? 20cm Pin to Pin 1 Pin Jumper Wire Dupont Line (Arduino Male to Male)
- 20 ? 20cm Pin to Hole 1 Pin Jumper Wire Dupont Line (Arduino Male to Female)
- 1 ? MB102 Breadboard 830 Points Solderless Prototyping Breadboard
- 1 ? 2.54mm Pitch 40 Pin Male Header
- 1 ? 2.54mm Pitch 40 Pin Single Row Female Header Strip
- 1 ? Towerpro Sg90 Sg 90 180 Degree Servo Motor
- 1 ? 24BYJ High Torque Geared Stepper Motor
- 1 ? DC 2V to 24V 5100 RPM High Torque Mini Micro Motor
SKU: n/a -
3G, 4G & Wifi Controllers, Control Card, Full Color Controllers, SMD Screens & Tickers
HD-A3 Full Color Asynchronous Controller
-14%3G, 4G & Wifi Controllers, Control Card, Full Color Controllers, SMD Screens & TickersHD-A3 Full Color Asynchronous Controller
Key Features
- Control Range: 655,360 million pixels
- 8GB memory, support expending memory by U-disk.S
- Support HD video decoding, 60Hz frame rate output
- Support widest 4096 pixel, highest 2048 pixel
- No need set IP address, it could be identified by controller ID automatically
- Unified management of more LED display through Internet or LAN
- Equipped with Wi-Fi, Mobile APP management
- Equipped 3.5mm standard audio interface output
- Support 3G/4G connection (Optional)
- Click Here to Download HD-A3 User Manual
- Click Here to Download HD-A3 Software HDPlayer
SKU: n/a -
Single/Full Color (RGB) Panels/Modules, SMD Screens & Tickers
Red P10 Single Color Outdoor DIP LED Module For Tickers
-15%Single/Full Color (RGB) Panels/Modules, SMD Screens & TickersRed P10 Single Color Outdoor DIP LED Module For Tickers
Key Features
- Full outdoor: IP65
- Size (W x H): 320 x 160 mm (320 x 160cm), 12.6 x 6.3 Inch
- Resolution (W x H): 32 x 16 = 512
- HUB Signal: HUB12
- Volt: 5v DC
- Brightness: 5000 cdm (nits)
- LED: DIP 5 mm
- Accessories: Rubber seal, data wire, power cable
- Can work with control card: U6A, U6B, U60, W60, U61, U62, U64, U6BN, WLP-XUA2, WLP-XUB1, etc.
- Display can Show: Text, Animation word, Time, Count, Lunar calendar
- Support simple animation characters
- Click Here to Download HD-U6A Software HD2018
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ESP-01S Esp8266 Wifi Module
?Key Features :
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 1?1 MIMO, 2?1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
140 jumper wire box
?Key Features :
- High-quality materials: These jumpers are made of excellent copper-coated material with outstanding conductivity and transmission performance, easily reshaped for connection testing.
- Easy to use: Each breadboard jumper has stripped ends for easy insertion into the breadboard, connecting via pin connections without soldering.
- Easy to store: All jumper wires are neatly stored in the included plastic sorting box, which helps you keep the jumpers organized for easy identification and use.
- Broad application range: These flexible wire bridges for breadboards and lab boards are ideal for use with plugboards, prototypes, LED strips, test circuits, and more. They are widely used in electronic projects for connections and rapid circuit testing.
- Wide variety: The set includes a diverse range of wire bridges in the most common lengths, allowing you to complete any project successfully.
SKU: n/a -
Products Grid
Crazy Discounts
Best Sellers
-
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
₨ 18,500.00₨ 22,000.00
-
Genset Products, Manual & Remote Start Units
DKG116 Manual And Remote Start Unit
₨ 14,500.00₨ 15,000.00 -
Genset Products, Synchronization Units
DKG117 Synchroscope And Check Synch Relay
₨ 25,000.00₨ 28,000.00 -
-
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
₨ 27,000.00₨ 30,000.00 -
Auto Transfer Switches (ATS), Genset Products
DKG325 Genset Control & ATS Panel
₨ 35,000.00₨ 40,000.00
Recently Added
Electrical Instruments, Multimeters, Tools & Hardware
UT18D Uni-T Voltage and Continuity Tester
Key Features:-
8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
Phase sequence test
Automatic polarity test
Continuity test
RCD function
Auto power off
Frequency measurement
Low impedance measurement
LED+LCD display at the same time
Buzzer alarm
Flashlight
Safety rating: CAT III 1000V / CAT IV 600V
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT18B Voltage Detector Tester
Key Features:
Wide Voltage Range: Accurately tests voltage from 12V to 690V, suitable for various applications.
AC/DC Voltage Testing: Supports both AC and DC voltage testing for enhanced versatility.
LED Indicators: Clear LED indicators for instant voltage level readings.
Continuity Test: Built-in buzzer for quick continuity checks.
Waterproof and Dustproof: IP65-rated design for reliable operation in challenging environments.
Dual-Display Design: Offers both digital and analog displays for clear and flexible readings.
Ergonomic Build: Lightweight and easy to handle, ideal for prolonged usage.
Safety Compliance: Meets international safety standards for worry-free operation.
SKU: n/a
Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
-20%


Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
Alloy Composition: Sn63Pb37 (63% Tin, 37% Lead) for reliable electrical conductivity and strong bonding.
Particle Size: 25–45 μm, perfect for precision applications.
Weight: 500 grams – suitable for extended use in industrial or professional settings.
Mark: N-grade quality for consistent and top-notch performance.
Manufacturer: ZS.HX China – a renowned name in soldering materials.
Excellent wetting properties for clean, smooth solder joints.
Eutectic composition ensures a low melting point of 183°C, minimizing thermal stress on components.
Packaged to maintain freshness and prevent contamination.
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT181A True RMS Datalogging Multimeter
Key Features:-
Data logging: 20000
Data comparison
3.5-inch 64k color TFT LCD
Dual temperature measurement
Low pass filter
2000mAh Li-ion battery
Real time and date
Peak hold
Bluetooth/APP
USB interface cable /PC software CD
IP65
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
-8%


Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
-3%


Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
-6%


Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60BT Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60EU Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60S Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a