Unbeatable Offer
Save 2%
-2%


Esp8266 Ch340 Lolin Nodemcu V3 Wifi Development Board Iot
₨ 590.00-
Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start Units
D300 Advanced Genset Controller
-17%Auto Transfer Switches (ATS), Automatic Mains Failure Units (AMF), Genset Products, Manual & Remote Start UnitsD300 Advanced Genset Controller
Key Features
- AMF unit with uninterrupted transfer
- ATS unit with uninterrupted transfer
- Remote start controller
- Manual start controller
- Engine controller
- Remote display & control unit
- Waveform display of V & I
- Harmonic analysis of V & I
- CTs at Genset or load side
- Click Here To Download D300 User Manual
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Uno R3 with USB Cable
Key Features
- The operating voltage is 5V
- The recommended input voltage will range from 7v to 12V
- The input voltage ranges from 6v to 20V
- Digital input/output pins are 14
- Analog i/p pins are 6
- DC Current for each input/output pin is 40 mA
- DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB
- SRAM is 2 KB
- EEPROM is 1 KB
- CLK Speed is 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Electrical Instruments, Multimeters, Tools & Hardware
UT18D Uni-T Voltage and Continuity Tester
- Key Features:-
- 8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
- Phase sequence test
- Automatic polarity test
- Continuity test
- RCD function
- Auto power off
- Frequency measurement
- Low impedance measurement
- LED+LCD display at the same time
- Buzzer alarm
- Flashlight
- Safety rating: CAT III 1000V / CAT IV 600V
SKU: n/a -
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
Key Features
- True RMS measurements
- Dual genset mutual standby operation
- Event logging with time stamp and measurements
- Battery backed-up real-time clock
- Built in daily / weekly / monthly exerciser
- Weekly operation schedule programs
- Field adjustable parameters
- RS-232 serial port
- Free MS-Windows Remote monitoring SW
- MODBUS communications
- Customer logo display capability
- 10ADC relay outputs
- Configurable analog inputs: 4
- Configurable digital inputs: 7
- Configurable relay outputs: 2
- Total relay outputs: 6
- I/O expansion capability
- Plug-in connection system
- Click Here To Download DKG317 User Manual
SKU: n/a -
Control Card, Single & Dual LED Controllers, SMD Screens & Tickers
HD-U6BN LED Control Card with USB Port
-14%Control Card, Single & Dual LED Controllers, SMD Screens & TickersHD-U6BN LED Control Card with USB Port
Key Features
- Types of control card Single Color/ Dual Color
- Control range Single color: Single color: 1024W*48H Dual color: 512W*48H Tricolor: 512W*24H
- Dual-color: 1024W * 48H 1024W * 24H
- Scan modes Static, 1/2 1/3,1/4 1/5 1/61/81/16 common modes etc.
- Communication type U-Disk
- Power supply +4.25.5V
- Power consumption 0.5W
- Work environment -20–75
- Installation dimension 65W*48 Hmm
- Application Range Used indoor-outdoor, semi-outdoor, Led Pharmacy Cross signs showing text, animation, time, clock etc.
- Languages Support All languages
- Click Here to Download HD-U6BN User Manual
- Click Here to Download HD-U6BN Software HD2018
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ADXL-1345 Tripple Axis Accelerometer Module
-3%Arduino, Arduino Boards & Components, Development KitsADXL-1345 Tripple Axis Accelerometer Module
?Key Features :
-
- Voltage ? Supply : 3.3 V/ 5V.
- Interface 😕I?C, SPI.
- Sensing Range 😕?2g, 4g, 8g, 16g.
- Sensitivity:
- X : 28.6 LSB/g.
- Y : 31.2 LSB/g.
- Z : 34.5 LSB/g.
- Sensor Type 😕Accelerometer 3 Axis.
- Dimensions : 28 mm x 14 mm.
- Weight : 10 gm.
- Ultra Low Power: 40?A in measurement mode, 0.1?A in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
- Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command
- Wide temperature range (?40?C to +85?C).
- 10,000 g shock survival.
- Support 5V/3.3V voltage input, on-board RT9161 power chip, lower pressure drop faster than the 1117, faster load speed of response, very suitable for high-noise power supply environment.
- User-selectable resolution
- Fixed 10-bit resolution.
- Full resolution, where resolution increases with?g?range, up to 13-bit resolution at ?16?g?(maintaining 4 mg/LSB scale factor in all?g?ranges).
SKU: n/a -
-
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
-11%Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
Key Features
- Emergency Stop Low-Lub oil pressure Speed
- Manual Start/stop Charge Failure Voltage of battery
- Distance Start/Stop Emergency STOP Lub Oil pressure
- Preheat Control High temperature of cooling water Operation time
- Stop/idle control High Speed/Start and stop failure Voltage/Current
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
N20 DC Gear Motor
?Key Features :
- Motor size: 10*12 (N20 motor)
- Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
- Shaft length: 8mm
- Weight: 10g
- Rated load : 200 g.cm
- Working temperature: -10 degrees – 65 degrees
- Motor mounting position: horizontal or vertical
- Reduction ratio : 1:298
- Rated voltage: DC 5V?
- Rated current : 36 MA
- Rated load speed: 50RPM
- Stall torque: 1 KG.cm
- Operating voltage range : DC3V-6V
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
?Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling?mills?Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported 3wd Smart Robot Car Chassis Kit
?Key Features :
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported Original 4wd Smart Robot Car Chassis Kit
-3%Arduino, Arduino Boards & Components, Development KitsImported Original 4wd Smart Robot Car Chassis Kit
?Key Features :
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity.
- Large and stable Chassis, easy for expansion.
- Easy interface with Arduino development platform.
- Enormous space between middle & bottom chassis.
- This kit is great for DIY Learning, Academic Research, Hobby Projects and Robot Competitions.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
W1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
-4%Arduino, Arduino Boards & Components, Development KitsW1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
?Key Features :
-
-
- Temperature Control Range: Minus 50 to 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Water Flow Sensor
?Key Features :
-
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80?
- Working Humidity Range: 35%-80% RH
- Accuracy: ?10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2? nominal pipe connections, 0.78? outer diameter, 1/2? of thread
- Size: 2.5? x 1.4? x 1.4?
SKU: n/a -
-
Control Card, Full Color Controllers, SMD Screens & Tickers
HD-C35C Full Color Asynchronous Control Card
-11%Control Card, Full Color Controllers, SMD Screens & TickersHD-C35C Full Color Asynchronous Control Card
Key Features
- Control Range: 524,288 pixels
- 4GB memory, support expending memory by U-disk
- Support HD video hardware decoding, 60Hz frame rate output
- Support widest 1024 pixel, Highest 1024
- No need set IP address, it could be identified by controller ID automatically
- Unified management of more LED display through Internet or LAN
- Support Wi-Fi connection, Mobile APP management
- Equipped 3.5mm standard audio interface output
- Support 4G connect to Internet (Optional)
- Equipped with 10 lines HUB75E port, can be used for one receiving card
- Click Here to Download HD-C35C User Manual
- Click Here to Download HD-C35C Software HDPlayer
SKU: n/a -
Single/Full Color (RGB) Panels/Modules, SMD Screens & Tickers
Blue P10 Single Color Outdoor DIP LED Module For Tickers
-10%Single/Full Color (RGB) Panels/Modules, SMD Screens & TickersBlue P10 Single Color Outdoor DIP LED Module For Tickers
Key Features
- Full outdoor: IP65
- Size (W x H): 320 x 160 mm (320 x 160cm), 12.6 x 6.3 Inch
- Resolution (W x H): 32 x 16 = 512
- HUB Signal: HUB12
- Volt: 5v DC
- Brightness: 5000 cdm (nits)
- LED: DIP 5 mm
- Accessories: Rubber seal, data wire, power cable
- Can work with control card: U6A, U6B, U60, W60, U61, U62, U64, U6BN, WLP-XUA2, WLP-XUB1, etc.
- Display can Show: Text, Animation word, Time, Count, Lunar calendar
- Support simple animation characters
- Click Here to Download HD-U6A Software HD2018
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Universal Wheel For Smart Car Robot Omni Wheel
-8%Arduino, Arduino Boards & Components, Development KitsUniversal Wheel For Smart Car Robot Omni Wheel
?Key Features :
- Holder material:12mm cold-roll steel sheets,blue Zinc plating
Wheel material: White nylon PP material,wear resisting & handy
Wheel diameter: 24mm
Wheel face width: 13mm
Mounting height: 32mm
Plate size: 38*32(mm)
Mounting hole diameter:4mm
Mounting hole center distance:30*24(mm)
Single wheel load:10kg
Single wheel weight:0.04kg
SKU: n/a - Holder material:12mm cold-roll steel sheets,blue Zinc plating
-
Arduino, Arduino Boards & Components, Development Kits
Mb102 Breadboard Power Supply Module 3.3v5v For Arduino Solderless Bread Board
-5%Arduino, Arduino Boards & Components, Development KitsMb102 Breadboard Power Supply Module 3.3v5v For Arduino Solderless Bread Board
?Key Features :
- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
- Size: 53 x 32 x 23 mm.
SKU: n/a -
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
dsPIC30F2010 Microchip
-9%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.dsPIC30F2010 Microchip
- High-Performance
- 16-bit Digital Signal Controllers
Modified Harvard architecture - C compiler-optimized instruction set architecture
- 83 base instructions with flexible addressing modes
- 24-bit wide instructions, 16-bit wide data path
- 12 Kbytes on-chip Flash program space
- 512 bytes on-chip data RAM
- 1 Kbyte nonvolatile data EEPROM
- 16 x 16-bit working register array
- Up to 30 MIPs operation:
– DC to 40 MHz external clock input
– 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x) - 27 interrupt sources
- Three external interrupt sources
- Eight user-selectable priority levels for each interrupt
- Four processor exceptions and software traps
- Click Here To Download dsPIC30F2010 Data Sheet
SKU: n/a -
Arduino Boards & Components, i) Resistor, Capacitor, Inductor, Transistor etc., Manual & Remote Start Units
WDD35D4 6mm Round Shaft Rotary Wire Wound Potentiometer 5K Ohm 2Watt
-11%Arduino Boards & Components, i) Resistor, Capacitor, Inductor, Transistor etc., Manual & Remote Start UnitsWDD35D4 6mm Round Shaft Rotary Wire Wound Potentiometer 5K Ohm 2Watt
Key Features
- Brand Name: WDD35D4
- Rated Power:2W
- Resistance Tolerance:0.5%
- Type:Conductive Plastic Potentiometer
- Model Number:WDD35D-4 5K
- Technology:Metal Alloy
- Standard Resistance:5K
- Outer diameter: 36.5mm
- Shaft: 6mm
- Independence linearity: 0.5%
- Theoretical electrical angle: 345 deg 2 degree
- Resolution: Unlimited
- Temperature Coefficient of Resistance (ppm/degree): <400
- Operating temperature range: -55 degree to +125 degree
- Mechanical angle: 360 degree
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
0-60V Battery Level Meter
It is the perfect multifunctional tool for troubleshooting. Measure the power and energy consumption of any battery-powered device. The easy-to-read LCD screen provides clear digital readings. When connected, the wattmeter will continuously provide real-time readings of amperes, volts and watts. The device can calculate the voltage, current, power, discharge capacity and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Large screen reality, backlight can be set, function switching query.
SKU: n/a
Products Grid
Crazy Discounts
Best Sellers
-
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
₨ 18,500.00₨ 22,000.00
-
Genset Products, Manual & Remote Start Units
DKG116 Manual And Remote Start Unit
₨ 14,500.00₨ 15,000.00 -
Genset Products, Synchronization Units
DKG117 Synchroscope And Check Synch Relay
₨ 25,000.00₨ 28,000.00 -
-
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
₨ 27,000.00₨ 30,000.00 -
Auto Transfer Switches (ATS), Genset Products
DKG325 Genset Control & ATS Panel
₨ 35,000.00₨ 40,000.00
Recently Added
Electrical Instruments, Multimeters, Tools & Hardware
UT18D Uni-T Voltage and Continuity Tester
Key Features:-
8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
Phase sequence test
Automatic polarity test
Continuity test
RCD function
Auto power off
Frequency measurement
Low impedance measurement
LED+LCD display at the same time
Buzzer alarm
Flashlight
Safety rating: CAT III 1000V / CAT IV 600V
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT18B Voltage Detector Tester
Key Features:
Wide Voltage Range: Accurately tests voltage from 12V to 690V, suitable for various applications.
AC/DC Voltage Testing: Supports both AC and DC voltage testing for enhanced versatility.
LED Indicators: Clear LED indicators for instant voltage level readings.
Continuity Test: Built-in buzzer for quick continuity checks.
Waterproof and Dustproof: IP65-rated design for reliable operation in challenging environments.
Dual-Display Design: Offers both digital and analog displays for clear and flexible readings.
Ergonomic Build: Lightweight and easy to handle, ideal for prolonged usage.
Safety Compliance: Meets international safety standards for worry-free operation.
SKU: n/a
Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
-20%


Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
Alloy Composition: Sn63Pb37 (63% Tin, 37% Lead) for reliable electrical conductivity and strong bonding.
Particle Size: 25–45 μm, perfect for precision applications.
Weight: 500 grams – suitable for extended use in industrial or professional settings.
Mark: N-grade quality for consistent and top-notch performance.
Manufacturer: ZS.HX China – a renowned name in soldering materials.
Excellent wetting properties for clean, smooth solder joints.
Eutectic composition ensures a low melting point of 183°C, minimizing thermal stress on components.
Packaged to maintain freshness and prevent contamination.
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT181A True RMS Datalogging Multimeter
Key Features:-
Data logging: 20000
Data comparison
3.5-inch 64k color TFT LCD
Dual temperature measurement
Low pass filter
2000mAh Li-ion battery
Real time and date
Peak hold
Bluetooth/APP
USB interface cable /PC software CD
IP65
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
-8%


Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
-3%


Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
-6%


Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60BT Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60EU Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60S Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a