electronic power house
Showing 29–56 of 198 results
-
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIM Basic MK3258-975312V Controller for Generator
-8%
Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIM Basic MK3258-975312V Controller for Generator
Key Features
- Emergency Stop Low-Lub oil pressure Speed
- Manual Start/stop Charge Failure Voltage of battery
- Distance Start/Stop Emergency STOP Lub Oil pressure
- Preheat Control High temperature of cooling water Operation time
- Stop/idle control High Speed/Start and stop failure Voltage/Current
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
-11%
Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIM Basic MK3258-975524V Controller for Generator
Key Features
- Emergency Stop Low-Lub oil pressure Speed
- Manual Start/stop Charge Failure Voltage of battery
- Distance Start/Stop Emergency STOP Lub Oil pressure
- Preheat Control High temperature of cooling water Operation time
- Stop/idle control High Speed/Start and stop failure Voltage/Current
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIMPlus630-46512V Controller for Generator
-11%
Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIMPlus630-46512V Controller for Generator
Key Features
- 630-088 EIM (PREVIOUSLY 630-465) Interface 630-465 for gensets 12V
- 630-088 EIM is PREVIOUSLY 630-465
- The Engine Interface Module is a sealed engine mounted module that provided switching relays for the starter motor solenoid, glow plug and fuel solenoid.
- Use of the EIM 630-465 PLUS means that heavy currents such as fuel solenoid power are isolated from the control panel thus enabling individual protection of each of the circuits.
- Engine interface ModuleEIMPLUS630-46512V controller
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Interface Modules, Other Generator Parts/ Accessories
Engine Interface ModuleEIMPlus630-46624V Controller for Generator
-18%
Interface Modules, Other Generator Parts/ AccessoriesEngine Interface ModuleEIMPlus630-46624V Controller for Generator
Key Features
- 630-089 EIM (PREVIOUSLY 630-466) Interface 630-466 for gensets 24V
- 630-089 EIM is PREVIOUSLY 630-466
- The Engine Interface Module is a sealed engine mounted module that provided switching relays for the starter motor solenoid, glow plug and fuel solenoid.
- Use of the EIM 630-466 PLUS means that heavy currents such as fuel solenoid power are isolated from the control panel thus enabling individual protection of each of the circuits.
- Engine interface ModuleEIMPLUS630-46624V controller
- Package Dimension: 6.54 x 6.18 x 2.52 inches
SKU: n/a -
Generator Battery Chargers
EPH126 12V/6A Battery Charger for Generators
Key Features
- 100 KHz switch-mode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Short circuit protection
- Overload protection
- High-temperature protection
SKU: n/a -
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, Multimeters
GV05 Generator Meter-VAFPT
-38%
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, MultimetersGV05 Generator Meter-VAFPT
Key Features
- Digital multi-functional electric energy panel meter
- Display phase voltage, current, frequency, power, current running hours and accumulated time
- Module comes with a CT (Current Transformer), current range: 0-30A/0-50A/0-90A
- 4-digit LED digital display shows the measured value with screen change button
- Light weight and low-cost; No need for external power supply
- Easy operation and installation, Size: 60*33*51mm (2.36*1.3*2.01in), Cut-out size: 51*26mm(2.01*1.02in)
SKU: n/a -
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, Multimeters
MEA-11C Network Analyzer With RS485 Communication
Current, Volt, Ampere & Energy Meter etc., Digital Generator Meters, MultimetersMEA-11C Network Analyzer With RS485 Communication
Key Features
- The measurement information of parameters can be read from the display
- 3 wire + neutral systems can be measured
- It supports the Modbus protocol on RS485 communication
- A Special PC software is available for download specified parameters
- The turn rate of the current transformer and the turn rate of the voltage transformer can be changed
- The specified parameters can be recorded in a static area with a timestamp
- The recorded parameters can be
- downloaded to PC using special software
- The electricity in wires can be seen from the symbols on the LCD instantly
- The device is protected with a password for authorized used
- Click Here To Download Connection Scheme
- Click Here To Download Technical Specifications
- Click Here To Download Technical Drawings
SKU: n/a -
Generator Battery Chargers
SMPS1210 12V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS1210-D 12V/10A Genset Battery Charger With Display
Key Features
- Output voltage and current display
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS1210-D User Manual
SKU: n/a -
Generator Battery Chargers
SMPS125 12V/5A Battery Charger for Generators
Key Features
- 100 KHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Plug-in connection system
- Click Here To Download SMPS125 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS2410 24V/10A Genset Battery Charger
Key Features
- 100 kHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Analog output for charge current: 0-10 Volt-DC (0-10 A)
- Click Here To Download SMPS2410 User Manual
SKU: n/a -
Generator Battery Chargers
SMPS245 24V/5A Genset Battery Charger
Key Features
- 100 KHz switchmode architecture
- Float charging system
- Constant voltage output
- Current limited
- Rugged design for industrial environments
- Wide operating voltage range
- Rectifier fail output
- Boost charge input
- Short circuit protection
- Overload protection
- High-temperature protection
- Plug-in connection system
- Click Here To Download SMPS245 User Manual
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
0-60V Battery Level Meter
It is the perfect multifunctional tool for troubleshooting. Measure the power and energy consumption of any battery-powered device. The easy-to-read LCD screen provides clear digital readings. When connected, the wattmeter will continuously provide real-time readings of amperes, volts and watts. The device can calculate the voltage, current, power, discharge capacity and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Large screen reality, backlight can be set, function switching query.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
140 jumper wire box
Key Features :
- High-quality materials: These jumpers are made of excellent copper-coated material with outstanding conductivity and transmission performance, easily reshaped for connection testing.
- Easy to use: Each breadboard jumper has stripped ends for easy insertion into the breadboard, connecting via pin connections without soldering.
- Easy to store: All jumper wires are neatly stored in the included plastic sorting box, which helps you keep the jumpers organized for easy identification and use.
- Broad application range: These flexible wire bridges for breadboards and lab boards are ideal for use with plugboards, prototypes, LED strips, test circuits, and more. They are widely used in electronic projects for connections and rapid circuit testing.
- Wide variety: The set includes a diverse range of wire bridges in the most common lengths, allowing you to complete any project successfully.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
37-1 sensor kit
Key Features :
- KY-001 Temperature sensor module
- KY-002 Vibration switch module
- KY-003 Hall magnetic sensor module
- KY-004 Key switch module
- KY-005 Infrared emission sensor module
- KY-006 Small passive buzzer module
- KY-008 Laser sensor module
- KY-009 3-color full-color LED SMD modules
- KY-010 Optical broken module
- KY-011 2-color LED module
- KY-012 Active buzzer module
- KY-013 Temperature sensor module
- KY-015 Temperature and humidity sensor module
- KY-016 3-color LED module
- KY-017 Mercury open optical module
- KY-018 Photo resistor module
- KY-019 5V relay module
- KY-020 Tilt switch module
- KY-021 Mini magnetic reed modules
- KY-022 Infrared sensor receiver module
- KY-023 XY-axis joystick module
- KY-024 Linear magnetic Hall sensors
- KY-025 Reed module
- KY-026 Flame sensor module
- KY-027 Magic light cup module
- KY-028 Temperature sensor module
- KY-029 Yin Yi 2-color LED module 3MM
- KY-031 Knock Sensor module
- KY-032 Obstacle avoidance sensor module
- KY-033 Hunt sensor module
- KY-034 Automatic flashing colorful LED module
- KY-035 Class Bihor magnetic sensor
- KY-036 Metal touch sensor module
- KY-037 Sensitive microphone sensor module
- KY-038 Microphone sound sensor module
- KY-039 Detect the heartbeat module
- KY-040 Rotary encoder module
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
4×4 Keypad Matrix Keypad
Key Features :
-
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipments, instrument, etc.
- This allows a microcontroller to ‘scan’ the 8 output pins to see which of the 16 buttons is being pressed.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
-6%
Arduino, Arduino Boards & Components, Development Kits5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
Key Features :
- Input: 5 V 1A
- Charging and discharging indication
- Size: approximately 22mm * width 17mm * thickness 11mm
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
- Integration overcharging and over-discharging protection
- Support trickle mode and zero voltage charging
- Output: 5 V 1A
- Lithium voltage: 3 v-4.3 V
- Ports: Micro USB Android port. USB port output
- When charging: red light flashing Full charged: red light for a long time
- Has protection functions, protects from overcharger/overload (supports charger and discharger at the same time)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
A4988 A4988 Stepper Motor Driver
Key Features :
-
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Active Low Level Trigger Buzzer Alarm Module
-6%
Arduino, Arduino Boards & Components, Development KitsActive Low Level Trigger Buzzer Alarm Module
Key Features :
- Product Name:3.3 to 5V Active Buzzer Alarm Module Sensor And 3 Pin TTL Cable
- The Transistor drive module uses 8550
- With fixed bolt hole- easy installation- 2.6mm aperture.
- Operating voltage 3.3V-5V
- PCB dimensions: 34.28 mm (L) * 13.29 mm (W) * 11.5 mm (H)
- Wire length: 20.5cm
- Weight: 7 gm.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Active Piezo Buzzer 3v To 12V Active Buzzer for Arduino
-7%
Arduino, Arduino Boards & Components, Development KitsActive Piezo Buzzer 3v To 12V Active Buzzer for Arduino
Key Features :
- Piezo sounders contain a piezoelectric vibration plate (also known as a piezo element) within a molded case.
- Sound is emitted when a voltage is applied and the piezo element inside the case vibrates.
- Piezo buzzers generally use less current.
- Have a higher sound output and a wider operating voltage.
- Buzzers and Sounders can also be split into Audio Indicators and Audio Transducers.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ADXL-1345 Tripple Axis Accelerometer Module
-3%
Arduino, Arduino Boards & Components, Development KitsADXL-1345 Tripple Axis Accelerometer Module
Key Features :
-
- Voltage – Supply : 3.3 V/ 5V.
- Interface : I²C, SPI.
- Sensing Range : ±2g, 4g, 8g, 16g.
- Sensitivity:
- X : 28.6 LSB/g.
- Y : 31.2 LSB/g.
- Z : 34.5 LSB/g.
- Sensor Type : Accelerometer 3 Axis.
- Dimensions : 28 mm x 14 mm.
- Weight : 10 gm.
- Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
- Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command
- Wide temperature range (−40°C to +85°C).
- 10,000 g shock survival.
- Support 5V/3.3V voltage input, on-board RT9161 power chip, lower pressure drop faster than the 1117, faster load speed of response, very suitable for high-noise power supply environment.
- User-selectable resolution
- Fixed 10-bit resolution.
- Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges).
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%
Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625° /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60Ω±7%(25℃); 12v: 130Ω±7%(25℃)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10MΩ(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Due
Key Features
- Microcontroller : Atmel SAM3X8E ARM Cortex-M3
- CPU: 32-Bit
- Digital I/O: Pins54
- PWM Output: 12
- PWM Output: 12
- Analog Input: 12
- Analog Input: 12
- Flash Memory (Program Memory): 512 KB
- SRAM96KB (two banks: 64KB and 32KB)
- Operating Voltage: 3.3V
- Input Voltage: 7-12 V
- Oscillator up to 84 MHz
- Arduino Due is open-source hardware! You can build your own board using the following files
- Click Here to Download Open Source Arduino Software
- EAGLE FILES IN .ZIP
- SCHEMATICS
- FRITZING IN .FZPZ
- BOARD SIZE .IN
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Leonardo
Key Features
- MICROCONTROLLER: ATmega32u4
- OPERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMITS): 6-20V
- DIGITAL I/O PINS: 20
- PWM CHANNELS: 7
- ANALOG INPUT CHANNELS: 12
- DC CURRENT PER I/O PIN: 40 mADC
- CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 32 KB (ATmega32u4) of which 4 KB used by bootloader
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- CLOCK SPEED: 16 MHz
- LENGH: 68.6 mm
- WIDTH: 53.3 mm
- WEIGHT: 20 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino MEGA 2560 PRO Mini
Key Features
- Item type:MEGA 2560 Pro Embedded USB CH340G ATMEGA2560-16AU Chip
- Form factor-Mega PRO
- Microcontroller-ATmega 2560 (16 MHz)
- USB-UART-CH340G interface (12 MHz)
- input voltage-6-9 V (peack 18 V)
- PC-MicroUSB connection socket
- 70 digital I / O
- 16 analog entries
- 14 PWM
- 4 UART bus
- Click Here to Download Open Source Arduino Software
SKU: n/a
