Search results: “eph” – Page 3
Showing 57–84 of 96 results
-
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
?Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling?mills?Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
HTC-1 Temperature Humidity Mete
?Key Features :
- Temperature and Humidity displayed in HUGE 1″ high numbers.
- MAX / MIN Humidity & Temperature are recorded automatically and can be reset by the user
- Fahrenheit or Celsius readout (changeable by selecting F or C on the back)
- 12 or 24 hour time modes (changeable by using MODE & ADJ button to set)
- ALARM function
- MONTH & DAY display available by pushing ADJ button
- Integrated back stand for desktop or table use OR hanging hole for wall mounting
- Power: ONE standard AAA 1 .5v Battery
- Time, and Temperature display, Humidity display; With the calendar, alarm clock and the maximum or?minimum value of humiture memory functions; the convert of temperature and degree?Fahrenheit, Talkclock.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ZB2L3 Battery Capacity Tester External Load Discharge Type Module
-3%Arduino, Arduino Boards & Components, Development KitsZB2L3 Battery Capacity Tester External Load Discharge Type Module
?Key Features :
- Power supply voltage: DC4.5-6V (micro USB connector)
- Operating current: Less than 70mA
- Discharge voltage: 1.00V-15.00V, 0.01V resolution
- Termination voltage range: 0.5-11.0V
- Supported current: Maximum 3.000A, 0.001A resolution
- Maximum voltage measurement error: 1% + 0.02V
- Maximum current measurement error: 1.5% ? 0.008A
- Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value is switched by shifting the decimal point, when it is less than 10Ah will display X.XXX, up to 10Ah or more will display XX.XX, and so on.
- Board size: 50 x 37mm
- Finished size: 50 x 37 x 17mm (L x W x H maximum position size, contains copper foot height)
- Board net weight: 28g (including pillars)
- Resistor weight: about 27g (including cable)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
-6%Arduino, Arduino Boards & Components, Development Kits5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
?Key Features :
- Input: 5 V 1A
- Charging and discharging indication
- Size: approximately 22mm * width 17mm * thickness 11mm
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ?1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
- Integration overcharging and over-discharging protection
- Support trickle mode and zero voltage charging
- Output:?5 V 1A
- Lithium voltage: 3 v-4.3 V
- Ports: Micro USB Android port.?USB port output
- When charging: red light flashing Full charged: red light for a long time
- Has protection functions, protects from overcharger/overload (supports charger and discharger at the same time)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
37-1 sensor kit
?Key Features :
- KY-001 Temperature sensor module
- KY-002 Vibration switch module
- KY-003 Hall magnetic sensor module
- KY-004 Key switch module
- KY-005 Infrared emission sensor module
- KY-006 Small passive buzzer module
- KY-008 Laser sensor module
- KY-009 3-color full-color LED SMD modules
- KY-010 Optical broken module
- KY-011 2-color LED module
- KY-012 Active buzzer module
- KY-013 Temperature sensor module
- KY-015 Temperature and humidity sensor module
- KY-016 3-color LED module
- KY-017 Mercury open optical module
- KY-018 Photo resistor module
- KY-019 5V relay module
- KY-020 Tilt switch module
- KY-021 Mini magnetic reed modules
- KY-022 Infrared sensor receiver module
- KY-023 XY-axis joystick module
- KY-024 Linear magnetic Hall sensors
- KY-025 Reed module
- KY-026 Flame sensor module
- KY-027 Magic light cup module
- KY-028 Temperature sensor module
- KY-029 Yin Yi 2-color LED module 3MM
- KY-031 Knock Sensor module
- KY-032 Obstacle avoidance sensor module
- KY-033 Hunt sensor module
- KY-034 Automatic flashing colorful LED module
- KY-035 Class Bihor magnetic sensor
- KY-036 Metal touch sensor module
- KY-037 Sensitive microphone sensor module
- KY-038 Microphone sound sensor module
- KY-039 Detect the heartbeat module
- KY-040 Rotary encoder module
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Orginal UNO starter kit
?Key Features :
- 1 ? Arduino Uno R3
- 1 ? USB Cable for Arduino Uno and Arduino Mega
- 1 ? Arduino Infrared Remote
- 1 ? IR Transmitter LED 5mm Infrared Transmitter
- 1 ? KY-028 Ky028 Temperature Sensor Module
- 20 ? 20cm Pin to Pin 1 Pin Jumper Wire Dupont Line (Arduino Male to Male)
- 20 ? 20cm Pin to Hole 1 Pin Jumper Wire Dupont Line (Arduino Male to Female)
- 1 ? MB102 Breadboard 830 Points Solderless Prototyping Breadboard
- 1 ? 2.54mm Pitch 40 Pin Male Header
- 1 ? 2.54mm Pitch 40 Pin Single Row Female Header Strip
- 1 ? Towerpro Sg90 Sg 90 180 Degree Servo Motor
- 1 ? 24BYJ High Torque Geared Stepper Motor
- 1 ? DC 2V to 24V 5100 RPM High Torque Mini Micro Motor
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Cable for UNO
?Key Features :
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
- Aluminum under mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
140 jumper wire box
?Key Features :
- High-quality materials: These jumpers are made of excellent copper-coated material with outstanding conductivity and transmission performance, easily reshaped for connection testing.
- Easy to use: Each breadboard jumper has stripped ends for easy insertion into the breadboard, connecting via pin connections without soldering.
- Easy to store: All jumper wires are neatly stored in the included plastic sorting box, which helps you keep the jumpers organized for easy identification and use.
- Broad application range: These flexible wire bridges for breadboards and lab boards are ideal for use with plugboards, prototypes, LED strips, test circuits, and more. They are widely used in electronic projects for connections and rapid circuit testing.
- Wide variety: The set includes a diverse range of wire bridges in the most common lengths, allowing you to complete any project successfully.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Tpm10 Digital Thermometer Temperature Sensor Tester Meter Fy-10 With Metal Sensor
-5%Arduino, Arduino Boards & Components, Development KitsTpm10 Digital Thermometer Temperature Sensor Tester Meter Fy-10 With Metal Sensor
?Key Features :
- LCD display.
- High accuracy.
- This thermometer can also be used to measure object temperature (baby milk, food, bath water) or ambient temperature.
- Waterproof probe, easy to remove.
- Powered by 2 x 1.5v LR44 button cell.
- Comes with a probe that is easy to use.
- Perfect for use in incubators, brooders, homebrew room at any other place, the monitoring of temperature and humidity required.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
LCR-T4 Diode Triode Capacitance Esr Meter Transistor
-1%Arduino, Arduino Boards & Components, Development KitsLCR-T4 Diode Triode Capacitance Esr Meter Transistor
?Key Features :
- Measures Inductors with ESR (in ohms)
- Measures capacitance and ESR
- Auto Detects and Measures forward voltages of diodes, dual diode, and LEDs
- Test FETs gate capacitance and turn-on gate voltage
- Discovers transistor for NPN or PNP type and measures HFE / Gain and Saturation Voltage
- Test SCR,
- Can also test voltage regulators including surface mount regulators
- Measures Resistance, and Adjustable potentiometers
- Auto operation, Auto detects pinout of transistors, fets, LEDs, diodes and voltage regulators
- Bright Backlight
- One-touch operation
- Battery voltage display at power-up and low battery display
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
SG90 Towerpro 180 Degree Servo Motor
?Key Features :
- Tiny and lightweight with high output power. The servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds but smaller.
- You can use any servo code, hardware, or library to control these servos.
- Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. It comes with 3 horns (arms) and hardware.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
XL-6009 Dc To Dc Boost Converter Voltage Booster
-3%Arduino, Arduino Boards & Components, Development KitsXL-6009 Dc To Dc Boost Converter Voltage Booster
?Key Features :
- Module properties: unfenced step-up (BOOST)
- The input voltage: 3-32 v
- Continuous adjustable output voltage: 5v-35 v
- Input current: 4 a (Max), no-load 18 ma
- Module size: 44.7 (mm) x21.7 (mm)
- Input mode: IN + input level is, the IN ? negative input
- Output mode: OUT + output level is, the OUT ? output is negative
- Conversion efficiency: < 94% (the lower the pressure difference, the greater the efficiency)
- Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
A4988 A4988 Stepper Motor Driver
?Key Features :
-
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 ? 5.5V .
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
HC-05 Bluetooth Module
?Key Features :
-
- HC-05 Bluetooth Module In PakistanTTL Module (With EN Pin) Breakout is the latest Bluetooth wireless serial Module. This version of the popular Bluetooth module uses the HC-05. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
HC-06 Bluetooth Module
?Key Features :
-
-
- Works with any USB Bluetooth adapters.
- Default Baud Rate: 9600,8,1,n.
- Built in antenna.
- Coverage up to 30ft.
- Bluetooth version: V2.0+EDR
- Operating voltage: 3.3V
- Default Baud Rate: 9600,8,1,n.
- Signal coverage: 30ft
- Item size: 4.3 * 1.6 * 0.7cm
- Item weight: 3g
- Package size: 9 * 3 * 1cm
- Package weight: 8g
- Commercial Series: Bluetooth module board Series
- With LED indicator light, use 150mA and 3.3V regulation chip.
- With VCC.GND.TXD.RXD foot for the Bluetooth
- With ?Re-seach? button(ON/OFF/WAKE foot for it , external MCU outinput ?High level? can control module to re-seach)
- Compatible with bluetooth master module?.slave module?or master-slave(whole) module.
- Input voltage: 3.3~6V
- Size: 1.55cm*3.98cm
-
SKU: n/a -
-
-
Arduino, Arduino Boards & Components, Development Kits
MT3608 Mt3608 Booster Converter Power Module Dc-dc Step Up Module
-7%Arduino, Arduino Boards & Components, Development KitsMT3608 Mt3608 Booster Converter Power Module Dc-dc Step Up Module
?Key Features :
-
-
- It?s efficient up to?93%
- It can source a good amount of current
- It is an inexpensive converter module
- It?s simple to adjust to get your desired increase in voltage
- 4-bit or 8-bit MPU Interface
- Standard Type
- Works with almost any Microcontroller
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
DRV8825 Stepper Motor Driver With Aluminum Heat Sink
-3%Arduino, Arduino Boards & Components, Development KitsDRV8825 Stepper Motor Driver With Aluminum Heat Sink
?Key Features :
-
-
- Model:?DRV8825
- Supply Voltage:?8.2 ? 42 VDC.
- Current Capacity :?2.2A max(24V).
- Continuous current per phase:?1.5 A.
- Minimum Logic voltage:?2.5V.
- Maximum Logic Voltage:?5V.
- Microstep resolutions:?full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions?: 15 x 20 mm.
- Weight:?4 gm.
- Microstep resolutions:?full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor?s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45?V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3?V and 5?V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2?oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Esp8266 Ch340 Lolin Nodemcu V3 Wifi Development Board Iot
-2%Arduino, Arduino Boards & Components, Development KitsEsp8266 Ch340 Lolin Nodemcu V3 Wifi Development Board Iot
?Key Features :
-
-
- Uses CH340G instead of CP2102.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Don?t need to download resetting
- A great set of tools to develop NODEMCU
- Lowest cost WI-FI
- FOR Arduino like hardware IO
- Greatly speed up your IOT application developing process
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- WI-FI MCU ESP12E integrated and easy to the prototyping development kit.
- We provide the best platform for IoT application development at the lowest cost.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
- Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
- Event-driven API for network applications, which facilitates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
XL-4015 Adjustable Dc To Dc Step Down 5a Buck Converter With Heatsink
-4%Arduino, Arduino Boards & Components, Development KitsXL-4015 Adjustable Dc To Dc Step Down 5a Buck Converter With Heatsink
?Key Features :
- Input voltage range?4?38VDC(Note: input voltage not exceeding 38V).
- Output voltage range?1.25-36VDC adjustable.
- Output current:?0-5A.
- High efficiency up to 96%.
- Output power:?75W.
- Built-in thermal shutdown function
- Built-in current limit function
- In-Built output short protection function
- Input reverse polarity protection: None (if required, the high current diode in series with the input).
- Power Indicator:?Yes
- Short circuit protection: Yes (limit current 8A)
- Overtemperature protection: (automatically shut off the output after overtemperature)
- Input reverse polarity protection: No, (if necessary, please enter the string into the high current diode)
- Installation:?two 3mm screws
- Dimensions(LxWxH): 54 x 23 x 15 mm
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Mb102 Breadboard Power Supply Module 3.3v5v For Arduino Solderless Bread Board
-5%Arduino, Arduino Boards & Components, Development KitsMb102 Breadboard Power Supply Module 3.3v5v For Arduino Solderless Bread Board
?Key Features :
- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
- Size: 53 x 32 x 23 mm.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ESP-01S Esp8266 Wifi Module
?Key Features :
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 1?1 MIMO, 2?1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
L298 Motor Driver Module L298n For Arduino Dual h Bridge Motor Driver
-5%Arduino, Arduino Boards & Components, Development KitsL298 Motor Driver Module L298n For Arduino Dual h Bridge Motor Driver
?Key Features :
-
-
- Current Sense for each motor
- Heatsink for better performance
- Power-On LED indicator
- Dual H Bridge Motor Driver
- L298N motor driver IC
- Drives up to 2 bidirectional DC motors
- Integrated 5V power regulator
- 5V ? 35V drive voltage
- 2A max drive current
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
0-60V Battery Level Meter
It is the perfect multifunctional tool for troubleshooting. Measure the power and energy consumption of any battery-powered device. The easy-to-read LCD screen provides clear digital readings. When connected, the wattmeter will continuously provide real-time readings of amperes, volts and watts. The device can calculate the voltage, current, power, discharge capacity and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Large screen reality, backlight can be set, function switching query.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TP4056- Micro USB Li-ion Battery Charging Board With Current Protection Bms
-20%Arduino, Arduino Boards & Components, Development KitsTP4056- Micro USB Li-ion Battery Charging Board With Current Protection Bms
Key Features
- Microcontroller : Atmel SAM3X8E ARM Cortex-M3
- CPU: 32-Bit
- Digital I/O: Pins54
- PWM Output: 12
- PWM Output: 12
- Analog Input: 12
- Analog Input: 12
- Flash Memory (Program Memory): 512 KB
- SRAM96KB (two banks: 64KB and 32KB)
- Operating Voltage: 3.3V
- Input Voltage: 7-12 V
- Oscillator up to 84 MHz
- Arduino Due is open-source hardware! You can build your own board using the following files
- Click Here to Download Open Source Arduino Software
- EAGLE FILES IN .ZIP
- SCHEMATICS
- FRITZING IN .FZPZ
- BOARD SIZE .IN
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
-4%Arduino, Arduino Boards & Components, Development KitsLM2596 Dc To Dc Buck Converter Step Down Module Power Supply
Key Features:
- Model name:?DC-DC LM2596S buck module
- Input voltage:3.2V~46V (recommended for use in 40V)
- Output voltage:1.25V~35V
- Output current:3A (maximum)
- Conversion efficiency:92% (highest)
- Output ripple:<30mV
- Switching frequency:65KHz
- Working temperature:-45 ~ +85
- Dimension:21mm * 43mm * 14mm (length * width * height)
SKU: n/a