Unbeatable Offer
Save 4%
-4%


DH-XVR1A04 DVR By Dahua Technology
₨ 4,800.00-
Arduino, Arduino Boards & Components, Development Kits
Arduino Due
Key Features
- Microcontroller : Atmel SAM3X8E ARM Cortex-M3
- CPU: 32-Bit
- Digital I/O: Pins54
- PWM Output: 12
- PWM Output: 12
- Analog Input: 12
- Analog Input: 12
- Flash Memory (Program Memory): 512 KB
- SRAM96KB (two banks: 64KB and 32KB)
- Operating Voltage: 3.3V
- Input Voltage: 7-12 V
- Oscillator up to 84 MHz
- Arduino Due is open-source hardware! You can build your own board using the following files
- Click Here to Download Open Source Arduino Software
- EAGLE FILES IN .ZIP
- SCHEMATICS
- FRITZING IN .FZPZ
- BOARD SIZE .IN
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
LCR-T4 Diode Triode Capacitance Esr Meter Transistor
-1%Arduino, Arduino Boards & Components, Development KitsLCR-T4 Diode Triode Capacitance Esr Meter Transistor
Key Features :
- Measures Inductors with ESR (in ohms)
- Measures capacitance and ESR
- Auto Detects and Measures forward voltages of diodes, dual diode, and LEDs
- Test FETs gate capacitance and turn-on gate voltage
- Discovers transistor for NPN or PNP type and measures HFE / Gain and Saturation Voltage
- Test SCR,
- Can also test voltage regulators including surface mount regulators
- Measures Resistance, and Adjustable potentiometers
- Auto operation, Auto detects pinout of transistors, fets, LEDs, diodes and voltage regulators
- Bright Backlight
- One-touch operation
- Battery voltage display at power-up and low battery display
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ADXL-1345 Tripple Axis Accelerometer Module
-3%Arduino, Arduino Boards & Components, Development KitsADXL-1345 Tripple Axis Accelerometer Module
?Key Features :
-
- Voltage ? Supply : 3.3 V/ 5V.
- Interface 😕I?C, SPI.
- Sensing Range 😕?2g, 4g, 8g, 16g.
- Sensitivity:
- X : 28.6 LSB/g.
- Y : 31.2 LSB/g.
- Z : 34.5 LSB/g.
- Sensor Type 😕Accelerometer 3 Axis.
- Dimensions : 28 mm x 14 mm.
- Weight : 10 gm.
- Ultra Low Power: 40?A in measurement mode, 0.1?A in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
- Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command
- Wide temperature range (?40?C to +85?C).
- 10,000 g shock survival.
- Support 5V/3.3V voltage input, on-board RT9161 power chip, lower pressure drop faster than the 1117, faster load speed of response, very suitable for high-noise power supply environment.
- User-selectable resolution
- Fixed 10-bit resolution.
- Full resolution, where resolution increases with?g?range, up to 13-bit resolution at ?16?g?(maintaining 4 mg/LSB scale factor in all?g?ranges).
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
CH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
-6%Arduino, Arduino Boards & Components, Development KitsCH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
?Key Features :
- Dimensions: 53 x 18 x 7 (LxWxH) mm.
- Weight: 6gm.
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- USB to TTL conversion board used for STC microcontroller download DVD/ hard disk/router /GPS upgrade
- For STC Download: SCM must be a minimum system and external crystal oscillator
SKU: n/a -
Genset Products, Manual & Remote Start Units
DSE710 Manual & Auto Genset Controller
Key Features
- PC configurable using P810 Interface
- Digital and analog inputs
- Digital outputs
- Automatic shutdown or warning
- When fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Configurable inputs
- Back-lit character/icon LCD display
- Click Here To Download DSE710 User Manual
- Click Here To Download DSE710 Data Sheet
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino Uno R3 with USB Cable
Key Features
- The operating voltage is 5V
- The recommended input voltage will range from 7v to 12V
- The input voltage ranges from 6v to 20V
- Digital input/output pins are 14
- Analog i/p pins are 6
- DC Current for each input/output pin is 40 mA
- DC Current for 3.3V Pin is 50 mA
- Flash Memory is 32 KB
- SRAM is 2 KB
- EEPROM is 1 KB
- CLK Speed is 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
HTC-1 Temperature Humidity Mete
?Key Features :
- Temperature and Humidity displayed in HUGE 1″ high numbers.
- MAX / MIN Humidity & Temperature are recorded automatically and can be reset by the user
- Fahrenheit or Celsius readout (changeable by selecting F or C on the back)
- 12 or 24 hour time modes (changeable by using MODE & ADJ button to set)
- ALARM function
- MONTH & DAY display available by pushing ADJ button
- Integrated back stand for desktop or table use OR hanging hole for wall mounting
- Power: ONE standard AAA 1 .5v Battery
- Time, and Temperature display, Humidity display; With the calendar, alarm clock and the maximum or?minimum value of humiture memory functions; the convert of temperature and degree?Fahrenheit, Talkclock.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
CP-2102 Usb To Serial Usb To Uart Ttl Serial Module
-2%Arduino, Arduino Boards & Components, Development KitsCP-2102 Usb To Serial Usb To Uart Ttl Serial Module
?Key Features :
- Stable and reliable chipset CP2102.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector.
- 6pins for 3.3V, RST, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
- Byte receive buffer; 640 byte transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Event character support Line break transmission.
- USB suspend states supported via SUSPEND pins.
- Temperature Range: -40 to +85.
- Size: 42mm X 15mm.
- Weight: 4g
SKU: n/a
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
N20 DC Gear Motor
?Key Features :
- Motor size: 10*12 (N20 motor)
- Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
- Shaft length: 8mm
- Weight: 10g
- Rated load : 200 g.cm
- Working temperature: -10 degrees – 65 degrees
- Motor mounting position: horizontal or vertical
- Reduction ratio : 1:298
- Rated voltage: DC 5V?
- Rated current : 36 MA
- Rated load speed: 50RPM
- Stall torque: 1 KG.cm
- Operating voltage range : DC3V-6V
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
?Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling?mills?Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported 3wd Smart Robot Car Chassis Kit
?Key Features :
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported Original 4wd Smart Robot Car Chassis Kit
-3%Arduino, Arduino Boards & Components, Development KitsImported Original 4wd Smart Robot Car Chassis Kit
?Key Features :
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity.
- Large and stable Chassis, easy for expansion.
- Easy interface with Arduino development platform.
- Enormous space between middle & bottom chassis.
- This kit is great for DIY Learning, Academic Research, Hobby Projects and Robot Competitions.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
W1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
-4%Arduino, Arduino Boards & Components, Development KitsW1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
?Key Features :
-
-
- Temperature Control Range: Minus 50 to 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
KY-012 Small Active Buzzer Diy Module
?Key Features :
-
- Small and compact size, making it easy to integrate into your project
- Produces a loud and clear sound that can be heard from a distance
- Can be easily controlled with a microcontroller or other digital circuit
- Low power consumption, making it suitable for battery-powered projects
SKU: n/a -
-
Control Card, Full Color Controllers, Single & Dual LED Controllers, SMD Screens & Tickers
HD-U63 LED Control Card with USB Port
-13%Control Card, Full Color Controllers, Single & Dual LED Controllers, SMD Screens & TickersHD-U63 LED Control Card with USB Port
Key Features
- Support module: Single color/ Dual color/Tricolor
- Control range: Single color: 512W*128H Dual color: 256W*128H Tri color: 320W*64H
- FLASH Capacity: 4M Byte
- Communication Port: U-Disk
- HUB signal: 8HUB12, 4HUB08
- Program Quantity: 1000pcs Programs. also can change program by button or remote if weld sensor (Remoter can select1-999 Programs)
- Area Quantity: 20 areas with separate zone, and separated special effects and border
- Display Showing: TextAnimation wordTimeCountLunar calendar Display effects
- Click Here to Download HD-U63 User Manual
- Click Here to Download HD-U63 Software HD2018
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TEC1-12706 Thermoelectric Cooler Peltier 12vdc 6A Cooling Refrigeration Plate
-2%Arduino, Arduino Boards & Components, Development KitsTEC1-12706 Thermoelectric Cooler Peltier 12vdc 6A Cooling Refrigeration Plate
?Key Features :
- Ceramics thermoelectric Cooler semiconductor module TEC1-12706
- Small module.
- Its work is characterized by side refrigeration and side fever.
- Hot and cold on both sides of the temperature difference of 68 degrees
- Connected to the 12-volt power supply cooling piece on both sides there will be the difference in temperature, side cold side of the heat, do not long power cooler radiator, otherwise, it will cause cooler internal overheating and burning.
- Quality tested cooling cells.
- Solid-state, vibration-free, noise-free.
- Simple to install and operate.
- Fitted with 6-inch insulated leads
SKU: n/a -
Single/Full Color (RGB) Panels/Modules, SMD Screens & Tickers
Blue P10 Single Color Outdoor DIP LED Module For Tickers
-10%Single/Full Color (RGB) Panels/Modules, SMD Screens & TickersBlue P10 Single Color Outdoor DIP LED Module For Tickers
Key Features
- Full outdoor: IP65
- Size (W x H): 320 x 160 mm (320 x 160cm), 12.6 x 6.3 Inch
- Resolution (W x H): 32 x 16 = 512
- HUB Signal: HUB12
- Volt: 5v DC
- Brightness: 5000 cdm (nits)
- LED: DIP 5 mm
- Accessories: Rubber seal, data wire, power cable
- Can work with control card: U6A, U6B, U60, W60, U61, U62, U64, U6BN, WLP-XUA2, WLP-XUB1, etc.
- Display can Show: Text, Animation word, Time, Count, Lunar calendar
- Support simple animation characters
- Click Here to Download HD-U6A Software HD2018
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
MT3608 Mt3608 Booster Converter Power Module Dc-dc Step Up Module
-7%Arduino, Arduino Boards & Components, Development KitsMT3608 Mt3608 Booster Converter Power Module Dc-dc Step Up Module
?Key Features :
-
-
- It?s efficient up to?93%
- It can source a good amount of current
- It is an inexpensive converter module
- It?s simple to adjust to get your desired increase in voltage
- 4-bit or 8-bit MPU Interface
- Standard Type
- Works with almost any Microcontroller
-
SKU: n/a -
-
Automatic Mains Failure Units (AMF), Genset Products
DSE6020-MKII Auto Mains Failure Unit
Key Features
- Large back-lit icon display
- Heated display option available
- Fully configurable via the fascia or PC using USB comm.
- Efficient power save mode
- 3 phase generator sensing
- 3 phase mains (utility) sensing
Generator/load power monitoring (kW, kV A, kV Ar, pf) - Accumulated power monitoring (kW h, kVA h, kVAr h)
- Generator overload protection (kW)
- Generator/load current monitoring and protection
- Breaker control via fascia buttons
- Fuel and start outputs, configurable when using CAN
- 4 configurable DC outputs
- 4 configurable analog/digital inputs
- 6 configurable digital inputs
- Support for 0-10 V & 4-20 mA oil pressure sensors
- Configurable staged loading outputs
- CAN, MPU, and alternator speed sensing in one variant
- 3 engine maintenance alarms
- Engine speed protection
- Engine hours counter
- Engine pre-heat
- Engine run-time scheduler
- Engine idle control for starting & stopping
- Fuel pump control
- Real-time clock
- Battery voltage monitoring
- Start on low battery voltage
- Configurable remote start input
- 1 alternative configuration
- Comprehensive warning, electrical trip or shutdown protection upon a fault condition
- LCD and LED alarm indication
- Configurable event log (50)
- Click Here To Download DSE6020 User Manual
- Click Here To Download DSE6020 Data Sheet
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
DS1302 (Real Time Clock Ds1307 Ds 1307 Rtc I2c Module At24c32)
-3%Arduino, Arduino Boards & Components, Development KitsDS1302 (Real Time Clock Ds1307 Ds 1307 Rtc I2c Module At24c32)
?Key Features :
-
- Two-wire I2C interface
- Hour: Minutes: Seconds AM/PM
- Leap year compensation
- Accurate calendar up to the year 2100
- Consumes Less than 500nA in Battery-Backup
- 1Hz output pin
- 56 Bytes of Non-volatile memory available to the user
- 4KB of serial electrically erasable and programmable read-only memory (EEPROM)
- Embed DS18B20 temperature sensor interface with the pull-up resistor.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
CH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
-6%Arduino, Arduino Boards & Components, Development KitsCH340G Usb To TtL (Serial) Converter For Arduino Nano Raspberry Pi
?Key Features :
- Dimensions: 53 x 18 x 7 (LxWxH) mm.
- Weight: 6gm.
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- USB to TTL conversion board used for STC microcontroller download DVD/ hard disk/router /GPS upgrade
- For STC Download: SCM must be a minimum system and external crystal oscillator
SKU: n/a
Products Grid
Crazy Discounts
Best Sellers
-
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
₨ 18,500.00₨ 22,000.00
-
Genset Products, Manual & Remote Start Units
DKG116 Manual And Remote Start Unit
₨ 14,500.00₨ 15,000.00 -
Genset Products, Synchronization Units
DKG117 Synchroscope And Check Synch Relay
₨ 25,000.00₨ 28,000.00 -
-
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
₨ 27,000.00₨ 30,000.00 -
Auto Transfer Switches (ATS), Genset Products
DKG325 Genset Control & ATS Panel
₨ 35,000.00₨ 40,000.00
Recently Added
Electrical Instruments, Multimeters, Tools & Hardware
UT18D Uni-T Voltage and Continuity Tester
Key Features:-
8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
Phase sequence test
Automatic polarity test
Continuity test
RCD function
Auto power off
Frequency measurement
Low impedance measurement
LED+LCD display at the same time
Buzzer alarm
Flashlight
Safety rating: CAT III 1000V / CAT IV 600V
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT18B Voltage Detector Tester
Key Features:
Wide Voltage Range: Accurately tests voltage from 12V to 690V, suitable for various applications.
AC/DC Voltage Testing: Supports both AC and DC voltage testing for enhanced versatility.
LED Indicators: Clear LED indicators for instant voltage level readings.
Continuity Test: Built-in buzzer for quick continuity checks.
Waterproof and Dustproof: IP65-rated design for reliable operation in challenging environments.
Dual-Display Design: Offers both digital and analog displays for clear and flexible readings.
Ergonomic Build: Lightweight and easy to handle, ideal for prolonged usage.
Safety Compliance: Meets international safety standards for worry-free operation.
SKU: n/a
Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
-20%


Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
Alloy Composition: Sn63Pb37 (63% Tin, 37% Lead) for reliable electrical conductivity and strong bonding.
Particle Size: 25–45 μm, perfect for precision applications.
Weight: 500 grams – suitable for extended use in industrial or professional settings.
Mark: N-grade quality for consistent and top-notch performance.
Manufacturer: ZS.HX China – a renowned name in soldering materials.
Excellent wetting properties for clean, smooth solder joints.
Eutectic composition ensures a low melting point of 183°C, minimizing thermal stress on components.
Packaged to maintain freshness and prevent contamination.
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT181A True RMS Datalogging Multimeter
Key Features:-
Data logging: 20000
Data comparison
3.5-inch 64k color TFT LCD
Dual temperature measurement
Low pass filter
2000mAh Li-ion battery
Real time and date
Peak hold
Bluetooth/APP
USB interface cable /PC software CD
IP65
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
-8%


Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
-3%


Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
-6%


Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60BT Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60EU Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60S Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a