Unbeatable Offer
Save 17%
-17%


Bridge Rectifier Module 6RI100G-160 100A-1600V Fuji
₨ 2,500.00-
Arduino, Arduino Boards & Components, Development Kits
IR Infrared Obstacle Avoidance Sensor Module
-9%Arduino, Arduino Boards & Components, Development KitsIR Infrared Obstacle Avoidance Sensor Module
?Key Features :
-
-
- sensor adopts TR5000, high sensitivity
- sensitivity adjustable digital potentiometer to adjust (blue)
- modules can induction block from 0 to 3 cm
- 5 V working voltage of 3.3 V
- 5a output form the output analog voltage (0 to 5 v) B digital switch output (0 and 1)
- Has a fixed bolt hole, the work of the installation
- Small board PCB size: 3.5 cm * 1.5 cm
- The power indicator light (red) and digital switch output indicator light (green)
- Comparator USES the LM393 chips, work stability
- Three small plate interface specifications wire (4)
- 1 VCC external 3.3 V to 5 V
- 2 GND external GND
- 3 DO small plate digital output interface (0 and 1)
- 4 small AO plate analog output interface (0 to 5 v)
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
LCR-T4 Diode Triode Capacitance Esr Meter Transistor
-1%Arduino, Arduino Boards & Components, Development KitsLCR-T4 Diode Triode Capacitance Esr Meter Transistor
Key Features :
- Measures Inductors with ESR (in ohms)
- Measures capacitance and ESR
- Auto Detects and Measures forward voltages of diodes, dual diode, and LEDs
- Test FETs gate capacitance and turn-on gate voltage
- Discovers transistor for NPN or PNP type and measures HFE / Gain and Saturation Voltage
- Test SCR,
- Can also test voltage regulators including surface mount regulators
- Measures Resistance, and Adjustable potentiometers
- Auto operation, Auto detects pinout of transistors, fets, LEDs, diodes and voltage regulators
- Bright Backlight
- One-touch operation
- Battery voltage display at power-up and low battery display
SKU: n/a -
Electrical Instruments, Multimeters, Tools & Hardware
UNI-T UT201+ Digital Clamp Multimeter True RMS Clamp Meter
-10%Electrical Instruments, Multimeters, Tools & HardwareUNI-T UT201+ Digital Clamp Multimeter True RMS Clamp Meter
Key Features
- AC current
- AC/DC voltage
- Resistance
- Continuity test
- Diode test.
- True RMS measurement.
- Audiovisual NCV detection.
- Large LCD.
- Full-featured false detection protection for up to 600 V energy surges; overvoltage and overcurrent alarm functions.
- The power consumption of the meter is about 1.8 mA.
- The circuit has an automatic power-saving function.
- The consumption in the sleep state is <11 μA, which extends the battery life to 400 hours.
- Low battery indication.
- Automatic power of after 15 of no-operation (function can be turned off).
- Data hold function.
- Max/Min mode.
SKU: n/a -
-
Automatic Voltage Regulators (AVRs)
AVR EA05 Generator Automatic Voltage Regulator
Key Features
- Sensing Input: Voltage 220 / 380 / 440 VAC, 1 phase2 wire DIP switch selectable
- Frequency: 50 / 60 Hz, DIP switch selectable
- Power Input Voltage: 100 ~ 300 VAC, 1 phase 2 wire
- Output Voltage: Max. 90 VDC @ 240 VAC input
- Current Continuous: 5A Intermittent 7A for 10 sec
- Resistance: Min. 15 ohm Max. 100 ohm
- Voltage Regulation: < 0.5% ( with 4% engine governing )
- Voltage Build-up: Residual voltage at AVR terminal > 5 VAC
- Thermal Drift: 0.03% per C change in AVR ambient
- Click Here To Download EA05 User Manual
SKU: n/a -
-
3-Phase Inverters, Solar Inverters/ Chargers, Solar Panels & Controllers
Growatt MOD 15KTL3-X | 3-Phase inverter
-7%3-Phase Inverters, Solar Inverters/ Chargers, Solar Panels & ControllersGrowatt MOD 15KTL3-X | 3-Phase inverter
Key Features
- Future proof Battery Ready
- Touch key and OLED display
- Max. efficiency 98.6%
- Dual MPPTs
- DC/AC up to 2.0
- Type II SPD on AC&DC side
- Support export limitation
- AFCI function optional
- IP66 protection
- Growatt comprehensive warranty plan
- 05-years local warranty
- Click Here To Download Datasheet
- Click Here To Download Certificate
- Click Here To Download User Manual
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nodemcu Mini ESP8266 Wemos D1-Mini Wifi
?Key Features :
-
-
- 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire
- supported(except D0)
- 1 analog input(3.2V max input)
- Micro USB connection
- Use BRT (Bias Resistor Transistor), easier into flash mode.
- 30% increase in radiating area, more stable.
- Dimensions : 35 x 26 x 8 (LxWxH) mm.
- Weight: 10 gm.
- Board Color : Blue
- Compatible with Arduino
- Compatible with NodeMCU
- Compatible with MicroPython
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
N20 DC Gear Motor
?Key Features :
- Motor size: 10*12 (N20 motor)
- Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
- Shaft length: 8mm
- Weight: 10g
- Rated load : 200 g.cm
- Working temperature: -10 degrees – 65 degrees
- Motor mounting position: horizontal or vertical
- Reduction ratio : 1:298
- Rated voltage: DC 5V?
- Rated current : 36 MA
- Rated load speed: 50RPM
- Stall torque: 1 KG.cm
- Operating voltage range : DC3V-6V
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
?Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling?mills?Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported 3wd Smart Robot Car Chassis Kit
?Key Features :
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported Original 4wd Smart Robot Car Chassis Kit
-3%Arduino, Arduino Boards & Components, Development KitsImported Original 4wd Smart Robot Car Chassis Kit
?Key Features :
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity.
- Large and stable Chassis, easy for expansion.
- Easy interface with Arduino development platform.
- Enormous space between middle & bottom chassis.
- This kit is great for DIY Learning, Academic Research, Hobby Projects and Robot Competitions.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
W1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
-4%Arduino, Arduino Boards & Components, Development KitsW1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
?Key Features :
-
-
- Temperature Control Range: Minus 50 to 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.
-
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
ZB2L3 Battery Capacity Tester External Load Discharge Type Module
-3%Arduino, Arduino Boards & Components, Development KitsZB2L3 Battery Capacity Tester External Load Discharge Type Module
?Key Features :
- Power supply voltage: DC4.5-6V (micro USB connector)
- Operating current: Less than 70mA
- Discharge voltage: 1.00V-15.00V, 0.01V resolution
- Termination voltage range: 0.5-11.0V
- Supported current: Maximum 3.000A, 0.001A resolution
- Maximum voltage measurement error: 1% + 0.02V
- Maximum current measurement error: 1.5% ? 0.008A
- Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value is switched by shifting the decimal point, when it is less than 10Ah will display X.XXX, up to 10Ah or more will display XX.XX, and so on.
- Board size: 50 x 37mm
- Finished size: 50 x 37 x 17mm (L x W x H maximum position size, contains copper foot height)
- Board net weight: 28g (including pillars)
- Resistor weight: about 27g (including cable)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
-6%Arduino, Arduino Boards & Components, Development Kits5v 1a Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery Diy Power Bank Module
?Key Features :
- Input: 5 V 1A
- Charging and discharging indication
- Size: approximately 22mm * width 17mm * thickness 11mm
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ?1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
- Integration overcharging and over-discharging protection
- Support trickle mode and zero voltage charging
- Output:?5 V 1A
- Lithium voltage: 3 v-4.3 V
- Ports: Micro USB Android port.?USB port output
- When charging: red light flashing Full charged: red light for a long time
- Has protection functions, protects from overcharger/overload (supports charger and discharger at the same time)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Water Flow Sensor
?Key Features :
-
- Model: YF-S201
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Liters/Minute
- Working Temperature range: -25 to +80?
- Working Humidity Range: 35%-80% RH
- Accuracy: ?10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Liter: 450
- Durability: minimum 300,000 cycles
- Cable length: 15cm
- 1/2? nominal pipe connections, 0.78? outer diameter, 1/2? of thread
- Size: 2.5? x 1.4? x 1.4?
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
KY-012 Small Active Buzzer Diy Module
?Key Features :
-
- Small and compact size, making it easy to integrate into your project
- Produces a loud and clear sound that can be heard from a distance
- Can be easily controlled with a microcontroller or other digital circuit
- Low power consumption, making it suitable for battery-powered projects
SKU: n/a -
-
1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers
7KW Solar Inverter – Pure Sine Wave Output
-58%1-phase Inverters, Other Solar Parts, Solar Inverters/ Chargers, Solar Panels & Controllers7KW Solar Inverter – Pure Sine Wave Output
Key Features
-
- High Load Capacity: Can operate up to 7KW load (e.g., 2 ACs of 1.5 tons each, a fridge, refrigerator, water pump, TV, 10 energy savers, 3 fans)
- Pure Sine Wave: Ensures smooth and reliable power output
- Flexible Solar Panel Compatibility: Can work with a minimum of 4 solar panels (585W each) to a maximum of 14 solar panels (585W each)
- Battery-less Operation: Efficiently runs without a battery
- Microcontroller Based: Enhances precision and reliability
- Designed with Super High-Quality and High-Efficiency Components: Ensures longevity and superior performance
- User-Friendly LCD Display: Shows PV voltage, output voltage, running current, voltage, frequency, etc.
- Low Installation Cost: Cost-effective setup
- Easy Installation: Hassle-free setup process
- Low-Cost Repairs: Affordable maintenance and repair costs
- Only an?additional metal box with a fan and on/off switch is required.
- Front Panel with Configuration and Monitoring Buttons: Allows easy configuration and monitoring of inverter parameters
- Designed and Assembled in China: Built on high-quality PCB from the hi-tech industry of China
- Affordable and Accessible: High-quality performance at a reasonable price
- WAPDA Sharing Capability: Possible by adding two high-quality bridges (minimum 100A/100V capacity) inside or outside the box
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Arduino Leonardo
Key Features
- MICROCONTROLLER: ATmega32u4
- OPERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMITS): 6-20V
- DIGITAL I/O PINS: 20
- PWM CHANNELS: 7
- ANALOG INPUT CHANNELS: 12
- DC CURRENT PER I/O PIN: 40 mADC
- CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 32 KB (ATmega32u4) of which 4 KB used by bootloader
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- CLOCK SPEED: 16 MHz
- LENGH: 68.6 mm
- WIDTH: 53.3 mm
- WEIGHT: 20 g
- Click Here to Download Open Source Arduino Software
SKU: n/a -
Control Card, Full Color Controllers, SMD Screens & Tickers
HD-R512 Receiving Card
Key Features
- R512T, on-board 12*HUB75E ports compatible with: R500/R508/R512/ R512S/R516/R612, etc.
- With sending card: Dual-mode sending boxAsynchronous sending card, Synchronous sending card, Video processor of VP series.
Module type:Compatible with all common IC module, supported most PWM IC module.
Scan mode: Supports any scanning method from static to 1/64 scan
Communication method: Gigabit Ethernet
Control range: Recommend65,536 pixels (128*512) Outdoor module width 256, Indoor module width 128
Multi-card connection: Receiving card can be put in any sequence
Gray scale: 256~65536
Smart setting: A few simple steps to complete the smart settings, through the screen layout can be set to go with any alignment of the screen unit board
Test functions: Receiving card integrated screen test function, Test display brightness uniformity and display module flatness.
Communication distance: Super Cat5,Cat6 network cable within 80 meters
Port: 5V DC Power*2,1 Gbps Ethernet port*2, HUB75E*12
Input voltage: 4V-6V
Power: 5W - Click Here to Download HD-R512 User Manual
SKU: n/a
Products Grid
Crazy Discounts
Best Sellers
-
Genset Products, Manual & Remote Start Units
DSE3110 Manual & Auto Genset Controller
₨ 18,500.00₨ 22,000.00
-
Genset Products, Manual & Remote Start Units
DKG116 Manual And Remote Start Unit
₨ 14,500.00₨ 15,000.00 -
Genset Products, Synchronization Units
DKG117 Synchroscope And Check Synch Relay
₨ 25,000.00₨ 28,000.00 -
-
Genset Products, Manual & Remote Start Units
DKG317 Manual And Remote Start Unit
₨ 27,000.00₨ 30,000.00 -
Auto Transfer Switches (ATS), Genset Products
DKG325 Genset Control & ATS Panel
₨ 35,000.00₨ 40,000.00
Recently Added
Electrical Instruments, Multimeters, Tools & Hardware
UT18D Uni-T Voltage and Continuity Tester
Key Features:-
8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
Phase sequence test
Automatic polarity test
Continuity test
RCD function
Auto power off
Frequency measurement
Low impedance measurement
LED+LCD display at the same time
Buzzer alarm
Flashlight
Safety rating: CAT III 1000V / CAT IV 600V
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT18B Voltage Detector Tester
Key Features:
Wide Voltage Range: Accurately tests voltage from 12V to 690V, suitable for various applications.
AC/DC Voltage Testing: Supports both AC and DC voltage testing for enhanced versatility.
LED Indicators: Clear LED indicators for instant voltage level readings.
Continuity Test: Built-in buzzer for quick continuity checks.
Waterproof and Dustproof: IP65-rated design for reliable operation in challenging environments.
Dual-Display Design: Offers both digital and analog displays for clear and flexible readings.
Ergonomic Build: Lightweight and easy to handle, ideal for prolonged usage.
Safety Compliance: Meets international safety standards for worry-free operation.
SKU: n/a
Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
-20%


Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
Alloy Composition: Sn63Pb37 (63% Tin, 37% Lead) for reliable electrical conductivity and strong bonding.
Particle Size: 25–45 μm, perfect for precision applications.
Weight: 500 grams – suitable for extended use in industrial or professional settings.
Mark: N-grade quality for consistent and top-notch performance.
Manufacturer: ZS.HX China – a renowned name in soldering materials.
Excellent wetting properties for clean, smooth solder joints.
Eutectic composition ensures a low melting point of 183°C, minimizing thermal stress on components.
Packaged to maintain freshness and prevent contamination.
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT181A True RMS Datalogging Multimeter
Key Features:-
Data logging: 20000
Data comparison
3.5-inch 64k color TFT LCD
Dual temperature measurement
Low pass filter
2000mAh Li-ion battery
Real time and date
Peak hold
Bluetooth/APP
USB interface cable /PC software CD
IP65
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
-8%


Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
-3%


Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
-6%


Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60BT Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60EU Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60S Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a