Unbeatable Offer
Save 18%
-18%


AVR R448 Automatic Voltage Regulator For Generator of Leroy Somer
₨ 45,000.00-
Electrical Instruments, Multimeters, Tools & Hardware
UNI-T UT201+ Digital Clamp Multimeter True RMS Clamp Meter
-10%Electrical Instruments, Multimeters, Tools & HardwareUNI-T UT201+ Digital Clamp Multimeter True RMS Clamp Meter
Key Features
- AC current
- AC/DC voltage
- Resistance
- Continuity test
- Diode test.
- True RMS measurement.
- Audiovisual NCV detection.
- Large LCD.
- Full-featured false detection protection for up to 600 V energy surges; overvoltage and overcurrent alarm functions.
- The power consumption of the meter is about 1.8 mA.
- The circuit has an automatic power-saving function.
- The consumption in the sleep state is <11 μA, which extends the battery life to 400 hours.
- Low battery indication.
- Automatic power of after 15 of no-operation (function can be turned off).
- Data hold function.
- Max/Min mode.
SKU: n/a -
Control Card, Full Color Controllers, SMD Screens & Tickers
HD-D05 Full Color Asynchronous Control Card
-7%Control Card, Full Color Controllers, SMD Screens & TickersHD-D05 Full Color Asynchronous Control Card
Key Features
- Support variety full color modules
- Control range: 40,960 pixels
- Support 256~65536 gray level
- Support Image, Word art, Animation background, Neon light effect
- Support U-disk unlimited expansion program, plug in broadcast
- No need set IP address, HD-D05 could be identified by controller ID automatically
- Not support video play
- Click Here to Download HD-D05 User Manual
- Click Here to Download HD-D05 Software HDPlayer
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Arduino MEGA2560
Key Features
- PERATING VOLTAGE: 5V
- INPUT VOLTAGE (RECOMMENDED): 7-12V
- INPUT VOLTAGE (LIMIT): 6-20V
- DIGITAL I/O PINS: 54 (of which 15 provide PWM output)
- ANALOG INPUT PINS: 16DC
- CURRENT PER I/O PIN20 mADC CURRENT FOR 3.3V PIN: 50 mA
- FLASH MEMORY: 256 KB of which 8 KB used by bootloader
- SRAM: 8KB
- EEPROM: 4 KB
- CLOCK SPEED16 MHz
- LED_BUILTIN13
- LENGTH: 101.52 mm
- WIDTH: 53.3 mm
- WEIGHT: 37 g
- Click Here to Download Open Source Arduino Software
- EAGLE FILES IN .ZIP
- SCHEMATICS
- BOARD SIZE .IN
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
Arduino Nano MEGA328P-without Wire
Key Features:
- The Nano is using the chips ATmega+328P and CH340, not FT232 as official Arduino, so pls. use the driver from our site.
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
- Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Learn Arduino Nano with ease: Our ELEGOO Nano Board is the perfect choice for beginners and experts alike, with tutorials available to help you get started.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
St-link V2 Programmer For STM8 and STM 32
?Key Features :
- PCB installed inside of?aluminum alloy U disk?shell, portable, safe and reliable!
- Interface definition?directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse,?complete protection of your expensive computer motherboard!
- Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition!
- With 4 DuPont line, so you can easily respond to different target board line order!
- Use anti-static bag packaging.
SKU: n/a -
Electrical Instruments, Multimeters, Tools & Hardware
UT373 Mini Tachometer UNI-T RPM Meter
Key Features
- Auto range.
- Up to 99999 display; overload display, “OL”.
- RPM measurement and revolution count.
- Max/Min, Data hold.
- Signal trigger/laser-on indication.
- Low battery/auto power-off indication.
- LCD backlight.
SKU: n/a
-
Arduino, Arduino Boards & Components, Development Kits
Arduino 28byj48 5v Stepper Motor With Uln2003 Driver
-3%Arduino, Arduino Boards & Components, Development KitsArduino 28byj48 5v Stepper Motor With Uln2003 Driver
Key Features :
- Model : 28BYJ-48
- Number of Phase : 4
- Speed Variation Ratio : 1/64
- Stride Angle : 5.625? /64
- Rated voltage : DC [5v – 12v]
- DC resistance : 5v: 60??7%(25?); 12v: 130??7%(25?)
- Frequency : 100Hz
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque : 5v: >29.3mN.m; 12v: >42.1mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10M?(500V)
- Insulated electricity power : 600VAC/1mA/1s
- Insulation grade : A
- Rise in Temperature <40K(120Hz)
- Noise <35dB(120Hz,No load,10cm)
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
N20 DC Gear Motor
?Key Features :
- Motor size: 10*12 (N20 motor)
- Out Shaft diameter: 2.95mm ?(flat position: 2.45mm)
- Shaft length: 8mm
- Weight: 10g
- Rated load : 200 g.cm
- Working temperature: -10 degrees – 65 degrees
- Motor mounting position: horizontal or vertical
- Reduction ratio : 1:298
- Rated voltage: DC 5V?
- Rated current : 36 MA
- Rated load speed: 50RPM
- Stall torque: 1 KG.cm
- Operating voltage range : DC3V-6V
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
TT Motor Dc 3v 6v Dc Gear Motor
?Key Features :
- DIY Projects
- Battery-operated toys
- Disk drives Steel rolling?mills?Paper
- Machines Medical equipment
- Radio-controlled aircraft
- Automobiles Drive systems Positioning
- Industrial and consumer actuators Winches Robotics Mixers
- Robotic projects
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported 3wd Smart Robot Car Chassis Kit
?Key Features :
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Imported Original 4wd Smart Robot Car Chassis Kit
-3%Arduino, Arduino Boards & Components, Development KitsImported Original 4wd Smart Robot Car Chassis Kit
?Key Features :
- Simple mechanical structure, easy for installation.
- Adopts 4 DC motors for better power, speed and load capacity.
- Large and stable Chassis, easy for expansion.
- Easy interface with Arduino development platform.
- Enormous space between middle & bottom chassis.
- This kit is great for DIY Learning, Academic Research, Hobby Projects and Robot Competitions.
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
Nema17 4 Wire Stepper Motor Nema17 Stepper Motor
-4%Arduino, Arduino Boards & Components, Development KitsNema17 4 Wire Stepper Motor Nema17 Stepper Motor
Key Features :
-
- Stepper motor is known by its property to convert a train of input pulses into a precisely defined increment in the shaft position.
- This is a high-quality motor that can be used for a long time without stuck.
- It has a quite stable performance during work and will not lose step.
- Low noise and big torque, this is a great choice if you need a stepper motor.
- Stepper motor can be widely used for a 3D printer, CNC engraving machine, etc.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
W1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
-4%Arduino, Arduino Boards & Components, Development KitsW1209 DC12V Digital Thermostat Temperature Controller (Incubator Controller)
?Key Features :
-
-
- Temperature Control Range: Minus 50 to 110 C
- Resolution at -9.9 to 99.9: 0.1 C
- Resolution at all other temperatures: 1 C
- Measurement Accuracy: 0.1 C
- Control Accuracy: 0.1 C
- Refresh Rate: 0.5 Seconds
- Input Power (DC): 12V
- Measuring Inputs: NTC (10K 0.5%)
- Waterproof Sensor: 0.5M
- Output: 1 Channel Relay Output, Capacity: 10A
Best Online Shopping website for W1209 Temperature Controller Incubation Thermostat. Here you get W1209 Temperature Controller Thermostat at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Faisalabad and all over Pakistan.
-
SKU: n/a -
-
Genset Products, Manual & Remote Start Units
DSE710 Manual & Auto Genset Controller
Key Features
- PC configurable using P810 Interface
- Digital and analog inputs
- Digital outputs
- Automatic shutdown or warning
- When fault conditions are detected
- Manual start
- Engine pre-heat
- Engine monitoring and protection features
- Protected Solid State (PSS) outputs
- Front panel mounting
- Front panel programming
- Tamper-proof engine hours counter
- Remote start
- LED indicators
- Configurable timers
- Configurable outputs
- Configurable inputs
- Back-lit character/icon LCD display
- Click Here To Download DSE710 User Manual
- Click Here To Download DSE710 Data Sheet
SKU: n/a -
Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.
dsPIC30F2010 Microchip
-9%Arduino Boards & Components, Manual & Remote Start Units, Microcontroller, ICs etc.dsPIC30F2010 Microchip
- High-Performance
- 16-bit Digital Signal Controllers
Modified Harvard architecture - C compiler-optimized instruction set architecture
- 83 base instructions with flexible addressing modes
- 24-bit wide instructions, 16-bit wide data path
- 12 Kbytes on-chip Flash program space
- 512 bytes on-chip data RAM
- 1 Kbyte nonvolatile data EEPROM
- 16 x 16-bit working register array
- Up to 30 MIPs operation:
– DC to 40 MHz external clock input
– 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x) - 27 interrupt sources
- Three external interrupt sources
- Eight user-selectable priority levels for each interrupt
- Four processor exceptions and software traps
- Click Here To Download dsPIC30F2010 Data Sheet
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
0-60V Battery Level Meter
It is the perfect multifunctional tool for troubleshooting. Measure the power and energy consumption of any battery-powered device. The easy-to-read LCD screen provides clear digital readings. When connected, the wattmeter will continuously provide real-time readings of amperes, volts and watts. The device can calculate the voltage, current, power, discharge capacity and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Large screen reality, backlight can be set, function switching query.
SKU: n/a -
-
Arduino, Arduino Boards & Components, Development Kits
HTC-1 Temperature Humidity Mete
?Key Features :
- Temperature and Humidity displayed in HUGE 1″ high numbers.
- MAX / MIN Humidity & Temperature are recorded automatically and can be reset by the user
- Fahrenheit or Celsius readout (changeable by selecting F or C on the back)
- 12 or 24 hour time modes (changeable by using MODE & ADJ button to set)
- ALARM function
- MONTH & DAY display available by pushing ADJ button
- Integrated back stand for desktop or table use OR hanging hole for wall mounting
- Power: ONE standard AAA 1 .5v Battery
- Time, and Temperature display, Humidity display; With the calendar, alarm clock and the maximum or?minimum value of humiture memory functions; the convert of temperature and degree?Fahrenheit, Talkclock.
SKU: n/a -
Control Card, Single & Dual LED Controllers, SMD Screens & Tickers
HD-U6B Single Color Control Card with USB Port
-20%Control Card, Single & Dual LED Controllers, SMD Screens & TickersHD-U6B Single Color Control Card with USB Port
Key Features
- Types of control card Single Color/ Dual Color
- Control range Single color: 1024W * 48H 1024W * 48H
- Dual color: 1024W * 48H 1024W * 24H
- Scan modes Static, 1/2 1/3,1/4 1/5 1/61/81/16 common modes etc.
- Communication type U-Disk
- Power supply +4.25.5V
- Power consumption 0.5W
- Work environment -20–75
- Installation dimension 65W*48 Hmm
- Application Range Used indoor-outdoor, semi-outdoor, Led Pharmacy Cross signs showing text, animation, time, clock, etc.
- Languages Support All languages
- Click Here to Download HD-U6B User Manual
- Click Here to Download HD-U6B Software HD2018
SKU: n/a -
Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.
TP4056 type-C Lithium Battery Charging Board
-10%Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.TP4056 type-C Lithium Battery Charging Board
- Inputs with?Type C?female, can be directly input to do with the phone charger rechargeable lithium battery,
- And still retains the input voltage wiring pads, can be very convenient DIY
- Input voltage:?5V
- Charging cut-off voltage:?4.2V ? 1%
- Maximum charge current:?1000mA
- Battery over-discharge protection voltage:?2.5V
- Battery overcurrent protection current:?3A
- Board size:?2.6 * 1.7CM
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
ZB2L3 Battery Capacity Tester External Load Discharge Type Module
-3%Arduino, Arduino Boards & Components, Development KitsZB2L3 Battery Capacity Tester External Load Discharge Type Module
?Key Features :
- Power supply voltage: DC4.5-6V (micro USB connector)
- Operating current: Less than 70mA
- Discharge voltage: 1.00V-15.00V, 0.01V resolution
- Termination voltage range: 0.5-11.0V
- Supported current: Maximum 3.000A, 0.001A resolution
- Maximum voltage measurement error: 1% + 0.02V
- Maximum current measurement error: 1.5% ? 0.008A
- Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value is switched by shifting the decimal point, when it is less than 10Ah will display X.XXX, up to 10Ah or more will display XX.XX, and so on.
- Board size: 50 x 37mm
- Finished size: 50 x 37 x 17mm (L x W x H maximum position size, contains copper foot height)
- Board net weight: 28g (including pillars)
- Resistor weight: about 27g (including cable)
SKU: n/a
Products Grid
-
Arduino, Arduino Boards & Components, Development Kits
Arduino Pro Mini 5V 16MHz
Key Features
- Microcontroller: ATmega328
- Board Power Supply: 5 – 12 V (5V model)
- Circuit Operating Voltage: 5V
- Digital I/O Pins: 14
- PWM Pins: 6
- UART: 1
- SPI: 1
- I2C: 1
- Analog Input Pins: 6
- External Interrupts: 2
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32KB of which 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Click Here to Download Open Source Arduino Software
SKU: n/a -
3G, 4G & Wifi Controllers, Control Card, Full Color Controllers, SMD Screens & Tickers
HD-A601 Asynchronous-Synchronous LED Controller
-10%3G, 4G & Wifi Controllers, Control Card, Full Color Controllers, SMD Screens & TickersHD-A601 Asynchronous-Synchronous LED Controller
Key Features
- LED display sizes: 800600, 3840124, 2342048
- Built-in memory: 4 GBSupported modulesFull color
- Supported video formats: AVI, WMV, MP4, MPG, FLV, RMVB, VOB, SWF, etc.
- Number of HUB: inputs10 HUB75
- Screen rotation: 90, 180, 270
- Connection type: LAN / built-in Wi-Fi module
- Voltage: 4-6 VHD-A601 Asynchronous-Synchronous LED Controller
- Power: <5 W
- Operating temperature: -20C~80C
- Click Here to Download HD-A601 User Manual
- Click Here to Download HD-A601 Software HDPlayer
SKU: n/a -
3-Phase Inverters, Solar Inverters/ Chargers, Solar Panels & Controllers
Growatt MOD 20KTL3-X | 3-Phase Inverter
-11%3-Phase Inverters, Solar Inverters/ Chargers, Solar Panels & ControllersGrowatt MOD 20KTL3-X | 3-Phase Inverter
Key Features
- Photovoltaic inverters have?two MPPT inputs
- Equipped with?protection against lightning strikes?? AC/DC type II
- ?The inverters have built-in protections that guard against faults caused by material wear. In addition, they guarantee safety against arcing phenomenon (AFCI)
- The inverters are?IP 65?rated, so it can be installed outdoors
- Qualified installers can remotely check the operating parameters of photovoltaic panels and the power grid
- Management of the photovoltaic installation is possible thanks to the fully interpolated?ShinePhone application
- Touch screen, with which you can easily and quickly read the operating parameters of the inverter. Guaranteed durability even after a minimum of 20,000 clicks
- Inverter lightweight, durable and fireproof thanks to the?high-strength polycarbonate cover
- Growatt comprehensive warranty plan
- 05-years local warranty
- Click Here To Download Datasheet
- Click Here To Download Certificate
- Click Here To Download User Manual
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
-4%Arduino, Arduino Boards & Components, Development KitsLM2596 Dc To Dc Buck Converter Step Down Module Power Supply
Key Features:
- Model name:?DC-DC LM2596S buck module
- Input voltage:3.2V~46V (recommended for use in 40V)
- Output voltage:1.25V~35V
- Output current:3A (maximum)
- Conversion efficiency:92% (highest)
- Output ripple:<30mV
- Switching frequency:65KHz
- Working temperature:-45 ~ +85
- Dimension:21mm * 43mm * 14mm (length * width * height)
SKU: n/a
-
Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ Accessories
Bridge Rectifier Module 160MT160KB IR
-29%Bridge/ Diode Assemblies, Diode/ Modules/ SCR, Other Generator Parts/ AccessoriesBridge Rectifier Module 160MT160KB IR
Key Features
- Manufacturer: IR
- Type of bridge rectifier: Three-phase
- Max. off-state voltage: 1.6kV
- Load current: 160A
- Max. forward impulse current: 1.43kA
- Electrical mounting: Screw
- Version: module
- Max. forward voltage: 1.49V
- Leads: M5 screws
- Case: MT-K
- Mechanical mounting: Screw
- Click Here To Download 160MT160 KB Data sheet
SKU: n/a -
-
Crazy Discounts
-
-
Arduino, Arduino Boards & Components, Development Kits
LM2596 Dc To Dc Buck Converter Step Down Module Power Supply
-4%Arduino, Arduino Boards & Components, Development KitsLM2596 Dc To Dc Buck Converter Step Down Module Power Supply
Key Features:
- Model name:?DC-DC LM2596S buck module
- Input voltage:3.2V~46V (recommended for use in 40V)
- Output voltage:1.25V~35V
- Output current:3A (maximum)
- Conversion efficiency:92% (highest)
- Output ripple:<30mV
- Switching frequency:65KHz
- Working temperature:-45 ~ +85
- Dimension:21mm * 43mm * 14mm (length * width * height)
SKU: n/a -
Electronic Governors
S6700H Engine Speed Control Unit for Generators
Key Features:
- Speed control Unit S6700H is an All-Electronic Device Designed to control engine speed with fast and precise response to transient load changes
- Actuator default protection
- Speed signal Lose protection
- Over-speed & External high Level input Alarm
- High reliability and can withstand all kinds of electromagnetic interference around the engine
- Easy to install, you can adjust the working speed in advance to meet your requirements
- Prevent reverse battery voltage, instantaneous pulse voltage. So as not to damage the machine
- Fast and precise response, able to recognize momentary symbol changes
- Fully electronic closed-loop design and control of a wide range of engines
SKU: n/a -
Arduino, Arduino Boards & Components, Development Kits
HC-05 Bluetooth Module
?Key Features :
-
- HC-05 Bluetooth Module In PakistanTTL Module (With EN Pin) Breakout is the latest Bluetooth wireless serial Module. This version of the popular Bluetooth module uses the HC-05. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required.
SKU: n/a -
-
Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
-3%Electrical Instruments, Multimeters, Tools & HardwareUT71C Series Intelligent Digital Multimeters
- Key Features:-
-
True RMS, duty cycle, continuity buzzer
-
MAX/MIN/REL modes; peak/data hold; analog bar graph
-
45Hz~100kHz frequency response
-
LCD backlight; misplug alarm
-
Auto power off, low battery indication
-
Data logging
-
Auto and manual ranges selectable
-
USB interface, Bluetooth
-
Smart phone APP: iDMM
-
Works with UT-D07A Bluetooth adaptor
-
Download from Apple Store or Google Play Store
SKU: n/a -
Control Card, Full Color Controllers, SMD Screens & Tickers
HD-U60-75 Full Color LED Control Card with USB Port
-13%Control Card, Full Color Controllers, SMD Screens & TickersHD-U60-75 Full Color LED Control Card with USB Port
Key Features
- Support module: Used indoor outdoor, semi-outdoor full color display
- Control range: Full color: 640W*64H
- FLASH Capacity: 8M Byte
- Communication Port: U-Disk
- HUB signal: 2 HUB75
- Program Quantity: 1000pcs Programs. also can change program by button or remote if weld sensor (Remoter can select 1-999 Programs)
- Area Quantity: 20 areas with separate zone, and separated special effects and border
- Display Showing: TextAnimation wordTimeCountLunar calendar Display effects
- Click Here to Download HD-U60-75 User Manual
- Click Here to Download HD-U60-75 Software HD2018
SKU: n/a
-
Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.
TP4056 type-C Lithium Battery Charging Board
Arduino Boards & Components, Arduino Components, Manual & Remote Start Units, Microcontroller, ICs etc.TP4056 type-C Lithium Battery Charging Board
- Inputs with?Type C?female, can be directly input to do with the phone charger rechargeable lithium battery,
- And still retains the input voltage wiring pads, can be very convenient DIY
- Input voltage:?5V
- Charging cut-off voltage:?4.2V ? 1%
- Maximum charge current:?1000mA
- Battery over-discharge protection voltage:?2.5V
- Battery overcurrent protection current:?3A
- Board size:?2.6 * 1.7CM
SKU: n/a
Best Sellers
Recently Added
Electrical Instruments, Multimeters, Tools & Hardware
UT18D Uni-T Voltage and Continuity Tester
Key Features:-
8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V (AC/DC)
Phase sequence test
Automatic polarity test
Continuity test
RCD function
Auto power off
Frequency measurement
Low impedance measurement
LED+LCD display at the same time
Buzzer alarm
Flashlight
Safety rating: CAT III 1000V / CAT IV 600V
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT18B Voltage Detector Tester
Key Features:
Wide Voltage Range: Accurately tests voltage from 12V to 690V, suitable for various applications.
AC/DC Voltage Testing: Supports both AC and DC voltage testing for enhanced versatility.
LED Indicators: Clear LED indicators for instant voltage level readings.
Continuity Test: Built-in buzzer for quick continuity checks.
Waterproof and Dustproof: IP65-rated design for reliable operation in challenging environments.
Dual-Display Design: Offers both digital and analog displays for clear and flexible readings.
Ergonomic Build: Lightweight and easy to handle, ideal for prolonged usage.
Safety Compliance: Meets international safety standards for worry-free operation.
SKU: n/a
Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
-20%


Soldering Paste, Soldering, Glue Rods, Bits etc., Tools & Hardware
Solder Paste – 500g | High-Quality Soldering Paste Sn63Pb37
Alloy Composition: Sn63Pb37 (63% Tin, 37% Lead) for reliable electrical conductivity and strong bonding.
Particle Size: 25–45 μm, perfect for precision applications.
Weight: 500 grams – suitable for extended use in industrial or professional settings.
Mark: N-grade quality for consistent and top-notch performance.
Manufacturer: ZS.HX China – a renowned name in soldering materials.
Excellent wetting properties for clean, smooth solder joints.
Eutectic composition ensures a low melting point of 183°C, minimizing thermal stress on components.
Packaged to maintain freshness and prevent contamination.
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT181A True RMS Datalogging Multimeter
Key Features:-
Data logging: 20000
Data comparison
3.5-inch 64k color TFT LCD
Dual temperature measurement
Low pass filter
2000mAh Li-ion battery
Real time and date
Peak hold
Bluetooth/APP
USB interface cable /PC software CD
IP65
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
-8%


Electrical Instruments, Multimeters, Tools & Hardware
UT71E Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
-3%


Electrical Instruments, Multimeters, Tools & Hardware
UT71C Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
-6%


Electrical Instruments, Multimeters, Tools & Hardware
UT71A Series Intelligent Digital Multimeters
Key Features:-
True RMS, duty cycle, continuity buzzer
MAX/MIN/REL modes; peak/data hold; analog bar graph
45Hz~100kHz frequency response
LCD backlight; misplug alarm
Auto power off, low battery indication
Data logging
Auto and manual ranges selectable
USB interface, Bluetooth
Smart phone APP: iDMM
Works with UT-D07A Bluetooth adaptor
Download from Apple Store or Google Play Store
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60BT Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60EU Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a
Electrical Instruments, Multimeters, Tools & Hardware
UT60S Series Digital Multimeters
Key Features:
9999 count
True RMS
Bluetooth
Duty cycle
Diode/Continuity test
Temperature
Non-contact voltage
Analog bar/Data hold
Backlight/Relative mode
Auto/Manual range
Low battery indication
Three-color LED light indicator
SKU: n/a